Designed for use with Nikon WR-R11b WR-T10 Remote Controller Setcameras featuring an accessory terminal, the Nikon WR-R11b WR-T10 Remote Controller Setcan be used to wirelessly trigger the camera's shutter when paired with the separate WR-T10 or WR-1 Wireless Remote Controller. It can also be used to trigger select radio-enabled flash units or as a master to trigger up to 64 transceiver units. Additionally, suiting its use in busier environments, three selectable radio frequencies are available for reliable use.

WR-T10 Wireless Remote Controller    WR-R11b Remote Controller    For Cameras with an Accessory Terminal

Related Questions and Answers

Q: 1. Will back button focus work with this?

A: Wherever you have your focus set doesn't matter because when you connect the remote you control everything through the remote.

Q: 2. Can the WR-R11a be triggered by a Nikon Z8 in synchronized release mode? I want to release my D750 at the same time as my Z8.

A: Yes, the Nikon WR-R11a Remote Controller can trigger the Nikon Z8 Mirrorless Camera while the Nikon WR-R11b Remote Controller triggers the Nikon D750 DSLR Camera simultaneously by paring them on the same channel and pin number.

Q: 3. Will this remote work with d850?

A: No, the WR-R11b/WR-T10 combo will not work with the Nikon D850 camera. It uses the 10-pin Nikon connection. The WR remote set you need is this one, the WR-R11a/WR-T10 set: https://bhpho.to/3a4nmme

Q: 4. I own both the D850 and the Z7. Which remote set do I need to get?

A: Nikon Z7 you can use Nikon WR-R11b/WR-T10 Remote Controller Set B&H # NIWR11BWRT10 and D850 Nikon WR-R10/WR-T10/WR-A10 Wireless Remote Adapter Set BH #NIWR10 • MFR #27106

Q: 5. Is this all would need to use an SB-5000 in radio mode off my D750?

A: Yes, the Nikon WR-R11b Remote Controller would be all you would need to wirelessly trigger the Nikon SB-5000 Speedlight Flash remotely. You would follow the instructions in both your camera's and your flash's instruction manual and set the switch on the SB-5000 to [Remote] and select the Radio Remote mode from the flash's menu for the two items to communicate with one another. The Nikon D750 should have a "Technical Guide for Radio-Controlled Advanced Wireless Lighting" manual that was included with the camera or which is downloadable for free from the Support page on Nikon USA's website.

Q: 6. If i buy a wr-b11 and a wrt10 will one remote trigger both cameras that will be connected to them ?

A: Yes, a single WR‑T10 can be paired with multiple WR‑R11b controllers and used to simultaneously release the shutters on multiple cameras with one press of the WR‑T10’s shutter-release button.

Q: 7. RE: WR-R11b receiver. Is there an indicator light that confirms the unit was activated?

A: Yes, the WR-R11b has two LED indicator lights that signify an established connection as well as triggering. The top LED flashes red during triggering and/or AF activation and the bottom light flashes a longer green pulse when a photograph is fired (as opposed to a continuous short green pulse every few seconds that signifies the unit is connected to the WR-T10).

Q: 8. Will this work with a D750?

A: Yes it will!

Q: 9. Will this still connect to the camera with an L-bracket installed on the Nikon z8?

A: An L-bracket will not fit the Nikon Z8 Mirrorless Camera with the attached Nikon WR-R11b Remote Controller.

Q: 10. Is this item compatible with the Z series of Nikon Mirrorless?

A: The Nikon WR-R11b/WR-T10 Remote Controller Set would be compatible with the following Z series of Nikon Mirrorless cameras. Z 7, Z 6II, Z 7II, and Z 6.