Camvate Arri M6 Adapter For 1/4"-20 Threads

Product Code: eq86845
Availability: In Stock

$50.70 $66.92

Qty

18 reviews Write a review

Description
Reviews (18)

The CAMVATE ARRI M6 Adapter for 1/4"-20 Threadsfrom CAMVATE ARRI M6 Adapter for 1/4"-20 Threadsis designed to attach to your camera cage to support accessories compatible with the ARRI M6 rosette standard, such as select handgrips. To ensure compatibility with virtually all cages, the adapter features mounting slots where the included 1/4"-20 screws can be adjusted in spacing to match the spacing of the 1/4"-20 threads on your camera cage. An Allen key is also included for securing the two supplied screws.

1/4"-20 Attachment to Camera Cages Allows Mounting Handgrips/Accessories Slotted Design for Wide Compatibility

Parameters
Rosette Type	ARRI Rosette with M6 Thread
Material of Construction	Anodized Aluminum
Width	2.6" / 66 mm
Weight	1.75 oz / 49.5 g
Packaging Info
Package Weight	0.12 lb
Box Dimensions (LxWxH)	5.2 x 3.7 x 0.95"

Related Questions and Answers

Q: 1. What is the diameter (in mm) of these tubes?

A: Each individual part from the RigWheels 6" Stand-Offs with 1/4"-20 Threads (Set of 4) (B&H# RISO14X64PC) is 6" (about 15.2cm) long and about 2/3" (16.7mm) in diameter.

Q: 2. The specs state that the length is 0.6. This spigot has a female thread at each end, which seems to indicate that length listed is not adequate for both threads. What is the length of this spigot?

A: 30 mm

Q: 3. Is this just for ONE spigot???

A: The Impact Double-Ended Spigot with 5/8" Stud and 1/4"-20 Threads is a single spigot.

Q: 4. Does it have cold shoe mount?

A: The SHILL Smartphone Mount with Two 1/4"-20 Threads BH #SHGP260 does not have a cold shoe mount.

Q: 5. What is the maximum weight that the stud can support? i.e. The super clamps say 33 lbs, and the tripod head say 6.6 lbs, but does that mean the stud can support a maximum of 7.6 lbs: 1lb (Weight of 056 3D Junior Pan/Tilt Head) + 6.6lbs (Load capacity of the 056 3D Junior Pan/Tilt Head) = 7.6lbs? I cant seem to find this information anywhere. Thanks!

A: I don't have a specific weight for you, but I regularly use an 8 lb camera setup on the stud at a pretty sharp angle and I have not had any problems. Be careful to not over tighten as the soft brass metal will twist off fairly easily.

Q: 6. Are they waterproof also can parts (rubber seals hinges or latches be ordered for self repairs?

A: This case is not waterproof, and yes, replacement latches and gaskets are available.

Q: 7. Is this product appropriate length and thread to mount a camera on a c-stand grip head for overhead flat lay photography?

A: Yes.

Q: 8. Will this stretch far enough for a iphone 7+ (with small case) to fit?

A: Hello AdamThank you for your question! Our unit will indeed stretch far enough to fit with your Iphone 7+ if your case is not too thick. Our unit stretches approximately to 3 1/4 inches. Make sure your Iphone with the cage is within those dimensions.We hope this helps and we thank you for your interest in our products.The SHAPE team

Q: 9. does this have a flat side? Thanks

A: Yes it does...

Q: 10. Can this be used to mount my Nanlite Forza 500 COB light to my impact heavy duty light stand? The spigot the light stand comes with is too small and flimsy, I'm look for something more robust that will give more stability to this set up. Thanks

A: Yes, the Impact Double-Ended Spigot with 5/8" Stud will work with the Nanlite Forza 500 and will be more supported by it.

Harold	21/09/2024
[0.12 lb] I saw someone else say this did not work for the BMPC4k so I was reluctant to buy it. I am glad I did. Perhaps the screws are shorter now because it fits perfectly. Usage: I need to offset the BMPC4k a bit to get it to fit on a Moza Air 2 when using small lenses. (Heavier lenses set the camera back enough that it does not need an offset.) I mounted the cheese plate on the Pocket Cinema 4k and a quick-release plate under that. The cheese plate is offset to the left but does not protrude past the side of the camera and does not cover the battery port. 5

Malenky	16/09/2024
[2.6" / 66 mm] these work great for clamping on to poles or edges like tables and desks 5

Lane	11/09/2024
[2.6" / 66 mm] I bought this thinking it may eventually be useful and I was right as I eventually ran into an issue with mounting screws not lining up correctly with two things I needed to mount together. I slapped this cheese plate on there and problem solved. 5

Michael	11/09/2024
[0.12 lb] I'm using this as a riser between a baseplate and quick release. Love the many mounting options and how many screws it comes with. 5

Zayd	19/08/2024
[2.6" / 66 mm] I purchased two of these for my OSEE 21.5, about a third of the cost of the counterpart that OSEE offers. Note that because of the long channel for the mounting screws, they tend to slide if you overtighten them. 5

Pablo	16/08/2024
[2.6" / 66 mm] i will need another twoo of this 5

David	02/08/2024
[2.6" / 66 mm] I needed this to mount an Arri rosette compatible handle to a camera cage. It works exactly as expected, easy to mount, and seems to be of high quality. 5

Mark	02/08/2024
[0.12 lb] The adapter accommodates a range of screw-hole distances on a cage so if you have a cage say made by Tilta and a mount made by Small Rig and two are not compatible (as I did) then this solves the issue. The rosette mount is very snug and can of course be angle-adjusted. 5

Steve	01/08/2024
[2.6" / 66 mm] This thing is great! Hangs on tight and gives you a number of 1/4-20 holes to screw into and a single 3/8. Which makes sense since 1/4-20 is so popular. I use it to mount a monitor in a lower position than the usual top-of-the-camera location on ENG/EFP cameras. 5