Make handling your DJI RS 2 or RSC 2 handheld gimbal easier with this SmallRig Sling Handgrip for DJI RS 2 RSC 2 Gimbalfrom SmallRig. This ergonomic silicone handgrip mounts onto the DJI R Briefcase handle, gives you the flexibility you need to shoot from a variety of angles, and it helps take the load off your arm. The grip mounts onto the gimbal using a 1/4"-20 anti-twist screw and can support a load up to 13.2 lb.

The aluminum sling grip features 1/4"-20 and 3/8"-16 mounting threads, an ARRI-style accessory thread, and an integrated shoe mount for an optional monitor, shoulder strap, or other accessory. A thumbscrew is included to replace the DJI R Briefcase handle screw to adjust the handle angle without a screwdriver.

Mounts onto DJI R Briefcase Handle    Silicone Grip Reduces Arm Fatigue    1/4"-20 & 3/8"-16 ARRI-Style Threads    1 x Shoe Mount, Mounts via 1/4"-20 Screw    13.2 lb Load Capacity    Allen Wrench Stores in Handle    Aluminum & Stainless Steel Construction

DJI RS 2 and RSC 2 handheld stabilizers

Also compatible with but not limited to:

SmallRig Magic Arm 2070

SmallRig Monitor Mount 2903

SmallRig Monitor Mount 2905

SmallRig Shoulder Strap KPAC2466

Related Questions and Answers

Q: 1. Can this NATO clamp be used on any NATO rail or is it specific to the NATO rail on the Ronin S gimbal?

A: Yes, this can be attached to any NATO rails.

Q: 2. Does this have enough clearance to mount a 7” monitor?

A: According to Smallrig this mount measures 134mm (about 5 1/4 inches), as such, most 7" monitors will have their screw mount in the middle requiring 3-4" space on either end. So in conclusion, yes, this mount should have more than enough clearance for most 7" monitors.

Q: 3. Can the grips be pointed up instead of down?

A: Yes, the mounting arms of the SmallRig Dual Handgrip for DJI RS 2/RSC 2/RS 3/RS 3 Pro Gimbal can be flipped for the handgrips to point up.

Q: 4. Can you Connect an iPhone without the raveneye, via Bluetooth for example or a cable?

A: Yes, The DJI RSC2 supports Bluetooth connection to your phone for setup and adjustment of the gimbals features. However only when using the Raveneye will you see a video signal on your phone.

Q: 5. Could this also mount onto the smallrig sling that comes with the wireless controller?

A: Yes. The following unit is compatible with the fooling strap system. SmallRig Shoulder Strap for Handheld Gimbals BH #SMKPAC2466 • MFR #KPAC2466 https://bhpho.to/3S6xNGu

Q: 6. Could I use this to mount a Rode shotgun mic?

A: Yes, you can. The top of the SmallRig Monitor Mount with NATO Clamp for DJI RS 2 & RSC 2 has a shoe mount that would work with Microphones. The bottom 1/4 20 screw would connect to a display. There is also another shoe mount on the arm itself as well as more screw hole mount points.

Q: 7. Is there a way to get this to work with the small rig magicfiz handgrip controller

A: SmallRig Dual Handgrip for DJI RS 2/RSC 2/RS 3/RS 3 Pro Gimbal is not compatible with the Smallrig FIZ for mounting.

Q: 8. Will this work with Panasonic S5 and 20-60mm lens?

A: Yes, the lens and cam combo comes in at 2.59lbs please be mindful that DJI RSC 2 Gimbal Pro has a 6.6 lbs payload system.

Q: 9. will this gimbal easily support a FUJI XH2S along with camera controls?

A: As of this moment the FUJI XH2S is not listed on the DJI RSC2, RS2 or RS3 compatibility list. The XH1 is listed so either gimbal will support the camera. However camera control has not yet been officially tested. https://www.dji.com/support/compatibility More info https://forum.dji.com/thread-271152-1-1.html

Q: 10. Can I mount a 7" monitor to this?

A: Yes, a 7" monitor would fit fine on the Smallrig Dual Handgrip for DJI RS 2/RSC 2 Gimbal, when using an appropriate shoe mount.