Extend your control cables when using a Canon servo lens and a Fujinon servo controller with this Chrosziel Canon Hirose to Fujinon 12-Pin Adapter Cablefrom Chrosziel. The short adapter cable features a 20-pin Hirose connector on one end for the Canon servo lens and a Fujinon 12-pin connector on the other end for a Fujinon focus controller.

Control Canon Servo Lens Focus    20-Pin Male Hirose to Lens    Fujinon 12-Pin Focus Control    Control Lens with Fujinon Controller

Canon servo lens
Fujinon focus controller

Related Questions and Answers

Q: 1. Second question: Will this also work with the Synco D2 when plugged into the new Beachtek-Max Active Audio Adapter DSLR?

A: No, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable will not work with the Synco Mic-D2 Hypercardioid Shotgun Microphone because it has a male XLR connector and the mic requires a female XLR connector. The V-Link Adapter Cable is intended for use with a microphone that has a 3.5mm output and requires plug-in power, but needs to connect to an XLR input. This cable does not allow phantom power to pass through to the microphone. It has a built-in phantom power converter that converts phantom power to 3 to 5V of plug-in power. The Mic-D2 needs to connect to an XLR mic input that can supply 48V of phantom power for the mic to operate.

Q: 2. Does this control wheel work with the Canon RF 24-105 PZ-E2B? Does is control the zoom function?

A: The IDX System Technology FR-C10 Manual Focus Remote Controller for Canon 20-Pin Lens is compatible with the Canon PZ-E2B Power Zoom Adapter as the Zoom Adapter features a 20-pin control port. However, the remote controller will only control focus and not zoom. Canon's recommended zoom demand is the Canon ZSD-300D Digital Zoom Servo Demand for Digital ENG/EFP Lenses, BH #CAZSD300D.

Q: 3. does this work for fx6?

A: Chrosziel only shows that there is compatibility with the original Sony FX9 handle unit, for the Chrosziel Sony Multiport Extension Cable for PXW-FX9.

Q: 4. Can I use this to connect the Deity HD-TX to my camera?

A: In theory, yes, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable could be used to connect an output signal from a camera's 3.5mm headphone jack to the XLR input on the Deity Microphones HD-TX Plug-On Transmitter with Built-In Recorder.

Q: 5. I own a fujinon A36X10.5BERD S28 lens. Will this work on this lens ? Thankyou

A: The controller will work with Fujinon Lenses that have a 12-Pin Port.

Q: 6. Is this compatible with the Canon CN-E 18-80mm?

A: Yes, the unit offers a 20 pin set interface. also keep in mind that the unit is compatible with the following cameras Canon HDF-HR500, HDF-500, HDF-700, HDF-700V, and HDM-700WV cameras

Q: 7. is this for canon pistol grip zoom controler to Fuji lens?

A: Yes the VZ-C8F128-pin to 12 pin Cable Converter will work Canon ZSG 200A to M and most of the other Canon controllers

Q: 8. Does it work with Rode Wireless Go II?

A: The V-Link adapter should work to connect the output from the Wireless GO II receiver to an XLR mic input. This adapter does have a built-in phantom power converter which would not be of use with the transmitter, but if used as a standard 3.5mm TRS to XLR male cable, it should function properly. As another option, you could use the Cable Techniques 18" 3.5mm R/A Low-Profile XLR-3M Male for RODE Wireless Go Output to Field Mixer and Recorder (B&H # CACTGOX3M18) which does not have the phantom power converter.

Q: 9. Does this provide phantom power like the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion BH #DEDXLR? I want to use my Deity Microphones V-Mic D3 Pro into a Focusrite Scarlett Solo interface to stream on Twitch with. Would this work?

A: Yes, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable can be used for the same types of applications as the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion. Like the D-XLR Adapter, the V-Link Cable has a built-in power converter that will allow you to use phantom power (48V) from the XLR input on the Focusrite Scarlett Solo USB Audio Interface and then converts it to plug-in power (3 to 5V), which the Deity Microphones V-Mic D3 Pro Shotgun Microphone requires to function.

Q: 10. Does it come in black?

A: The Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable - 12" is not available in black, but we do have similar cables from other manufacturers in black. The Cable Techniques Rode Wireless GO to Canon C70 Coiled Low-Profile Cable - 8 to 15" (B&H # CACTGOCC708) and the Cable Techniques Rode Wireless GO to 3-Pin XLR Male Low-Profile Cable - 18" (B&H # CACTGOCCX3M8) will both work in the same way as the Deity cable.