The Sennheiser MD 435 delivers the same nuanced resolution and transparent sound as the MD 9235 transmitter capsule, but in a wired, handheld dynamic microphone for live performance applications. Even in loud settings, the MD 435 reproduces vocals with detailed transparency and clarity, making it a suitable choice among sound engineers for highly demanding live and broadcast productions and complex stage settings.

Built with a lightweight, rapidly responding aluminum-copper voice coil, the MD 435 provides refined high frequencies with detailed transparency that highlights even the finest nuances, allowing subtle vocals to be heard and accentuated effortlessly in the mix. The spring-mounted capsule mitigates handling noise, while the hum compensation coil eliminates electromagnetic interference.

For Live Sound Production    Dynamic Handheld Microphone    Cardioid Pickup Pattern    Based on MD 9235 Transmitter Capsule    40 Hz to 20 kHz Frequency Response    Spring-Mounted Capsule    Resistant to Handling Noise    Electromagnetic Interference Protection    Rugged Metal Design    Includes Pop Filters, Mic Clip & Pouch

The MD 435 has inherited its remarkable acoustics and reliability from the famous MD 9235 transmitter capsule. These qualities are now available in a wired version.

The cardioid pickup pattern allows the user to be at varying distances and angles from the microphone and provides reliable protection against feedback.

Highly developed aluminum-copper voice coil forms the basis for a noticeably direct and nuanced sound.

The MD435 provides refined high frequencies with detailed transparency and highlights even the finest nuances. Even subtle vocals can be heard and accentuated effortlessly in the mix.

• Dynamic vocal microphone
• Lightweight, rapidly responding aluminum-copper voice coil
• Nuanced reproduction of high frequencies
• Assertive and resistant to feedback
• Directional characteristic: cardioid
• Large-diaphragm diameter
• Spring-mounted capsule to shield it from body-borne noise
• Hum compensation coil to eliminate electromagnetic interference
• Rugged metal design

Related Questions and Answers

Q: 1. What connection Jack does this mic use?

A: The AKG LC81 MD has a MicroDot connector. There are adapters available from AKG and other manufacturers to convert the MicroDot connector to a different type of connector and enable compatibility with a variety of wireless transmitters or to connect the mic to a standard XLR input. For example, the AKG MDA3 SEN2 MicroLite Microphone Adapter Connector for Sennheiser Bodypack Transmitter with 3.5mm Phone Jack (B&H # AKMDA3) or Deity Microphones DA35 Microdot to Locking 3.5mm Adapter - Black (B&H # DEDA35) will both convert the MicroDot connector to a 3.5mm TRS locking connector for use with Sennheiser transmitters. You can find the AKG MicroDot adapters listed on the item page for the mic -- click on the tab for "Accessories" above the product description, then click on the tab for "Adapters." You can also use the website search bar to find the adapters or contact us by phone or through live chat on the website if you would like further assistance.

Q: 2. Would this be a good lapel mic for sit down interview or is it designed primarily for stage use on actors?

A: The AKG LC81 MD Reference Lightweight Cardioid Lavalier Microphone could be used for an interview scenario as well as stage use. Its cardioid pickup pattern makes it more directional to help focus on the voice and eliminate external noise, as well as possibly reducing the possibility of feedback when it is amplified.

Q: 3. What kind of receiver is needed for this wireless mic?

A: Actually this is a wired mic

Q: 4. I'm getting a lot of handling noise with this mic. Does anyone have a suggestion/best practices on how to minimize, or eliminate, the handling noise? I almost can't use the audio recorded because of this issue.

A: Swap out the XLR cable. The mic shouldn't be generating much handling noise in normal use. I'm on my second one now after taking my original one around the world doing interviews for six years, and finally retired it. The most likely cause is a bad connection inside the XLR connector on the mic end of the cable, since that's where most of the stress is placed in routine use.

Q: 5. what is the difference with the e 835 except the switch?

A: The only difference between the e835 and e835S is the on/off switch. Other than the switch, the mics are identical.

Q: 6. Is this one mic capsule and one pre or a stereo set of 2 capsules and 2 pres ?

A: Based on the manual and information I am finding on this, this is only 1 mic capsule. It is timbrally identical with the other 8000-series microphones for optimum aural compatibility, so that you can capture a group of instruments in the same way that you would use a stereo pair of mics.

Q: 7. Is the MD-46 or the Electro-voice RE50 better in windy conditions? Which handles wind gusts better without a fur wind screen?

A: Neither one is going to handle wind well. Get a fur wind screen! Probably the MD46 is better, but that's not saying much under windy conditions.

Q: 8. Hi, I'm interested in buying one of these for interviews so I'll be using it outdoors mostly. Will I need a windshield and if so, what would be the best one to get?

A: For outdoor use a windscreen/windshield would be recommended. For very light wind situations a foam windscreen would suffice The Auray WHF-158 is a common choice. B&H # AUWHF158. For medium to high wind scenarios a more robust windshield would be recommended for quality results such as the K-Tek windsock B&H # KTKR5070.

Q: 9. Sennheiser MD-46, where is the serial number located and how do I get to it?

A: I couldn't find teh serial number. This mic really disappointed me. It was very expensive and produces an annoying noise. I thought was my mixer, but I tried oder mic and the noise have disappeared.

Q: 10. does this microphone require phantom power?

A: No, it is a dynamic mic