Designed for use with select Shure devices, the Kondor Blue TA4M Mini XLR to XLR Audio Cable 16"from Kondor Blue TA4M Mini XLR to XLR Audio Cable 16"is 16" long and features a 4-pin mini-XLR male connector on one end and a 3-pin XLR female on the other.

Designed for Select Shure Devices    4-Pin Mini-XLR Male    3-Pin XLR Female    16" Length

Related Questions and Answers

Q: 1. Will this adapter work with a countryman flute mice to a Rode Xl-XLR wireless system?

A: Hi Robert. Our assembly features bridged pins 3 and 4 on the XLR end, pins 1 and 2 are wired straight thru- I'm unsure of the pinouts that your equipment requires, but if it requires bridged pins 3 and 4 on the XLR connector then you should be good using this as an adapter. Thank you!

Q: 2. Hi! I would like to use this with an AVX microport receiver connected to an iPhone (acting as recorder). This haven't worked so far. The AVX puts out the max four bar level. What is the problem?

A: This adapter works with every iPod I have going back to one made in 2008. Audio levels are consistently good. I'll bump up the audio in post production at times. Use a dynamic with a hotter output (I use a Shure SM 63 or VP 64) to get higher input levels on your recordings.

Q: 3. Can this be used to connect crown 311 headset microphone to a senheisser bodypack

A: Our cable is wired straight thru (1 to 1, 2 to 2), with pins 3 & 4 bridged with a buss wire to the sleeve of the 3.5mm TRS. You will need to confirm the pin configurations of the Crown headset and Sennheiser bodypack to confirm compatibility. Thanks!

Q: 4. Does anyone have direct experience with this the KA 600i working with an iPhone 11 Pro? iPhone 11 Pro to XLR Mic?

A: You will need to use the adapter below to plug this into your iPhone 11. https://www.bhphotovideo.com/c/product/1280795-REG/apple_mmx62am_a_lightning_to_3_5mm_headphone.html?sts=pi-ps&pim=Y

Q: 5. What is the length oof the cable? Do they come in different lengths?

A: The cable length of the Kondor Blue cable is 16 inches. The cable does not come in other lengths.

Q: 6. Would this work with a cellphone connected to a 3 pin port on a racing headset ? Thanks

A: This is specifically designed for compatibility with Sennheiser products. We cannot predict how other products will behave.

Q: 7. Does it also work with bmpcc 6k or only the 6k pro?

A: The Kondor Blue Mini-XLR to XLR Female Cable for BMPCC 6K Pro & Canon C70 would also work with the Black Magic Pocket 6K G2, Pocket 4k, and Pocket 6K.

Q: 8. I'd like to use a Shure WL183 mic, with a Sennheiser SK100 body pack. Will this cable do the job?

A: I'm afraid not.

Q: 9. What's the length of the screw, not including the base?

A: The threaded section of Kondor Blue 3/8"-16 Screw for Mini Quick Release Plates (Long) is 7mm long.

Q: 10. Hey, will this work for using a Shure Twinplex TL47 with a sennheiser wireless system?

A: The TecNec TA4M-MPS-1.5 4-Pin Mini XLR Male to 3.5mm Stereo Cable (18") BH #TETA4MMPS1.5 should work well with the components you have listed.