The Calrad 35-512 Stereo 3.5mm TRS to RCA Adapteris a compact audio adapter designed to interconnect consumer electronics such as media players, DJ mixers, stereo receivers, and more. It features a stereo 3.5mm TRS male mini plug on one end, an RCA coaxial female connector on the other end, and nickel plating to ensure reliable conductivity.

Compact Audio Adapter    3.5mm TRS Male Mini Plug    RCA Coaxial Female Connector    Nickel Plated for Reliable Conductivity

Related Questions and Answers

Q: 1. Can this be used this to connect a microphone to the DJI OSMO Pocket?

A: No, but you can use the Saramonic SR-C2006 which is designed for the DJI Osmo Pocket.

Q: 2. Can I run the rear analog output of Marantz M-CR611 into SES-AUDIO-AB then out of the Sescom into 2 headphone amps using A/B switch to only play 1 headphone amp at a time ?

A: As long as you are using the RCA out to our unit, not the speaker out and converting, then yes our unit should work prefectly

Q: 3. Will this work for the Diety Timecode generator? Amazon 3.5m-3.5m cables don't work with diety time code TC-1

A: Yes, the Sennheiser CL 35 TRS Locking 3.5mm TRS to 3.5mm TRS Coiled Cable can be used with the Deity Microphones TC-1 Wireless Timecode Generator Box.

Q: 4. Can the locking end to used in a normal 3.5 mm port i.e the one on the side of your camera?

A: No, the locking connector on the Sennheiser CL 35 TRS Locking 3.5mm TRS to 3.5mm TRS Coiled Cable cannot be used for connection to a non-locking 3.5mm input or output. This cable is intended for use with a Sennheiser MKE 200 or MKE 400 Shotgun Microphone or XSW-D Wireless Microphone Receiver that has a locking 3.5mm output connector, or with similar devices. If you need a similar coiled cable with standard non-locking 3.5mm TRS connectors on both ends, you can use the Kopul CMX-RC30 Right-Angle Coiled Stereo Mini Cable (B&H # KOCMXRC30B).

Q: 5. could I use one transmitter with multiple receiver?, all on the same channelone director and 3 crew videographers

A: The transmitter unit will support an unlimited amount of receivers as long as they match the frequency of the transmitter. For this system, it would be the Shure P3R-H20. See B&H# SHP3RH20 or the P3RA-H20, B&H# SHP3RAH20

Q: 6. What's the difference between TRS and TRSS? I will use with BMPCC 6K Pro and Fujifilm X100VI.

A: The Sennheiser CL 35 TRS Locking 3.5mm TRS to 3.5mm TRS Coiled Cable (B&H # SECL35TRS) is designed for the Sennheiser MKE 200 and MKE 400 shotgun microphones to connect with DSLR or mirrorless cameras. "TRS" means the physical connector is configured as "tip, ring, sleeve.” The "TRRS" configuration is "tip, ring, ring, sleeve." These configurations relate to the number of conductors used in the cabling and connectors. "TRRS" is common to mobile phones, tablets, and computers. The FUJIFILM X100VI Digital Camera uses a sub-mini sized (2.5mm) TRS audio/microphone input, and it is not compatible with the Sennheiser CL 35 TRS cable. The Blackmagic Design Pocket Cinema Camera 6K Pro features a 1/8"/3.5mm mini stereo TRS audio input, which is compatible with the Sennheiser CL 35 TRS cable.

Q: 7. Can I use this to turn my MKE 400 into a desktop mic?

A: The Sennheiser CL 35 USB-C Locking 3.5mm TRS to USB Type-C Coiled Cable can be used with the Sennheiser MKE 400 Shotgun Microphone to enable connection to a mobile device like an Android smartphone or tablet. It should also work for connection to a computer with a USB-C port.

Q: 8. Does this send one receiver's output to left and the other to right, or a blend on both channels?

A: The Sennheiser CL 35-Y Dual Locking 3.5mm TRS Male to 3.5mm TRS Male Coiled Y-Cable can be used to send the audio output from two Sennheiser wireless receivers to a single 3.5mm TRS input.

Q: 9. Will this only work for recording setup, but also as a simple audio cable when Bluetooth is unavailable - *ie airplane monitor?

A: The Sennheiser CL 35 USB-C Locking 3.5mm TRS to USB Type-C Coiled Cable is an output cable, intended for use to connect a Sennheiser MKE 200 or MKE 400 Shotgun Microphone or a wireless microphone receiver with a locking 3.5mm TRS connector to a smartphone with a USB-C connector. The cable can be used for recording or just for connection of the external microphone to the smartphone.

Q: 10. Are the tip and ring (L/R) bridged?

A: No, they are separate pins and not bridged or connected.