From Sescom 1/4" TRS to TS HiFi Cable 30'featuring a four-conductor 25 AWG, 2-channel cable designed to optimize signal quality.

4-Conductor 25 AWG, 2-Channel Cable    Insert End: 1/4" TRS    Return/Send End: 1/4" TS    Designed to Optimize Signal Quality

Related Questions and Answers

Q: 1. Is this connector balanced, and if not will it pick up ground noise ?, Thank you

A: Un-balanced: The three foot REAN 3.5mm TRS to Dual 1/4 TS Pro Stereo Breakout Cable by Hosa Technology is designed to connect portable audio devices to pro audio gear with unbalanced 1/4 inputs. It's an ideal cable for connecting MP3 players, tablets, laptops and more to professional sound boards and DJ mixers.

Q: 2. Is the distance from each TS connector to the Y-junction 5' (i.e. total spread 10')?

A: No. the distance from the tip of the 1/8" connector to the tip of either of the TS connectors is 10'. The distance from each TS connector to the y-junction is considerably shorter than 5'.

Q: 3. Since this is passive, it's bidirectional, right? So I can take the signal from XLR line level to an 1/8" video capture input.

A: The Sescom AUD-TRS-BAL 3.5mm Stereo Unbalanced Audio to Dual XLR Balanced Converter Cable has male connectors on the XLR ends (which are used for connection to XLR inputs) and converts an unbalanced 1/8" (3.5mm) stereo output signal to a balanced XLR input signal, so it would not work. As an option for connecting dual XLR line output to an 1/8" (3.5mm) line input, you can use a standard Y-cable like the Hosa Technology Stereo Mini Angled Male to Two 3-Pin XLR Female Y-Cable - 1' (B&H # HOYCSMMR2XF1). If the 1/8" (3.5mm) input is a mic-level input, you can use a level-matching cable like the Sescom Attenuating Line to Mic Level Cable - TRS Male to Female XLR, 18" (B&H # SES43DBMZ2XJ), which will convert the line-level signal to mic level.

Q: 4. Will this magnetic mount fit the drivepro body 10?

A: Transcend lists the following supported devices: DrivePro Body 60/DrivePro Body 10B/DrivePro Body 20/DrivePro Body 52/DrivePro Body 30

Q: 5. How does the mono signal from the 1/4" connect to the stereo 3.5mm plug? Are there summing resistors inside the cable or plug?

A: The Movo Photo WGA-1 Mono 1/4" TS Male to Stereo 3.5mm TRS Male Adapter Cable sums a stereo signal from the 3.5mm connector to a mono signal on the 1/4" TS, or conversely, sends a mono signal from the 1/4" to the stereo 3.5mm connection in a dual mono fashion.

Q: 6. Has anyone used these when simply speaking to someone? I am a wedding photographer and am considering buying these for use during receptions when noise levels are very loud, and I end up having to stand near a speaker in order to take a picture. I would need to be able to hear a person speak though, since my job requires constant interaction with people throughout the duration of such noisy events, and cannot be constantly removing these every other minute.

A: Yes, you can hear people speak pretty well. They aren't muffled at all. I've used them at concerts and could still hear the person next to me even though it made everything much quieter. I have even worn them in noisy restaurants where the bulk of the noise is people and that is the only time I've had trouble hearing people with them in (then again, it was hard to hear without them as well so they probably didn't make the situation any worse). As a photographer as well, I would recommend these, they are very comfortable too.

Q: 7. are these connectors serviceable?

A: All REAN connectors are serviceable, which covers our entire Pro Series line. Best regards, Hosa Support.

Q: 8. If the signal is sent to two powered studio monitors, how far apart can they be from each other?

A: The monitors can be 3 feet apart if the cable is 3 feet long. I'm not sure that answers your question, because your question is a bit unclear -

Q: 9. Will this cable work as a standard TRRS to TRS adapter cable?

A: Not that we are aware of. This is specifically for the Canon 5D MK II when using Magic Lantern.

Q: 10. Is there a way to reverse the connections? One male xlr to Two female xlr?

A: Using these gender changer/turn-around adapters will make this Y adapter work for you: QTY: 1 - Neutrik XLR Male to XLR Male Adapter - B&H # NENA3MM a href= http://bhpho.to/1AUy9Ga target= _blank http://bhpho.to/1AUy9Ga/aQTY: 2 - Neutrik XLR Female to XLR Female Adapter - B&H # NENA3FF a href= http://bhpho.to/1EWoJv0 target= _blank http://bhpho.to/1EWoJv0/a