This 12" interchangeable 3200K Cineo Lighting Matchstix 12" Basic Lamp Head Kit 3200Kfrom Cineo Lighting Matchstix 12" Basic Lamp Head Kit 3200Kallows the fixture to achieve a high CRI rating of 98 and a TCLI rating of 99. Ratings this high indicate very precise and accurate rendition of color.

Matchstix 12" 3200K Phosphor Panel    Single Unit Power Supply    6' Barrel Extension    T-Slot Adapter

Related Questions and Answers

Q: 1. Could you use a standard LED bulb on the dp400iii at a more desirable color temp (5600K)?

A: You could use an led in theory but only if you found one one in this shape with the same bulb type that would fit. Generally they are wider and would interfere with the flash tube. The bulb needs to be e26/e27 and of this narrow shape and be 150W or less. We do not sell an led in this size and shape.

Q: 2. Does this have built-in witeless CRMX?

A: The Cineo Lighting LightBlade Edge LB2 LED Light does not have CRMX

Q: 3. Can this be used with the dp1000 III

A: Yes. The following modeling light will work with the dp1000 III unit.

Q: 4. Is this one Daylight White? Or is warm?

A: This is a tungsten balanced modeling lamp, so the color temperature would be warm.

Q: 5. can you also give the sk300?

A: Yes it will work BH #GOMLQS400II

Q: 6. It have ballast

A: Unfortunately, this is the lamp head only. The ballast for it would be the ARRI 575/800 High Speed Ballast with ALF and DMX for M8 B&H # ARBM8.

Q: 7. How many lumens does this lamp produce?

A: At 5600 K and within 3 ft from the subject, this panel produces 35 foot candles, which is about 377 lumens.

Q: 8. does this fit the Impact qualite V-2012?

A: Francisco, the Impact Qualite 300 is only rated to 300w, and the DYS lamp is a 600w lamp. I would not recommend using it in this fixture, as damage or personal injury could result. I would recommend the Ushio JCD-120/300W lamp for this fixture: a href= http://www.bhphotovideo.com/c/product/809258-REG/Ushio_1000896_JCD_750W_Lamp_300W_120V.html target= _blank http://www.bhphotovideo.com/c/product/809258-REG/Ushio_1000896_JCD_750W_Lamp_300W_120V.html/a

Q: 9. Does this lamp cast a yellow color onto your model? Is there an LED modeling lamp alternative with a higher CRI that would fit into a Godox DP 400 III?

A: This Godox modeling lamp tungsten-balanced, so using it as a main source would create a warmer color temperature in your image if the white balance in the camera is not set properly. Unfortunately, there is no LED equivalent that can be used with the SK400 II that would not interfere with the flash tube.

Q: 10. What modeling lamp replacement is compatible with Godox ms300?

A: Yes, the Godox Modeling Lamp for SK400II Flash Head (150W) is compatible in the Godox MS300.