Adam Hall 19" Rackmount Pull-Out Tray 1 Ru

Adam Hall 19" Rackmount Pull-out Tray 1 Ru

Product Code: eq88054
Availability: In Stock

$269.94 $391.41

Qty

18 reviews Write a review

Description
Reviews (18)

Looking to mount a tabletop device into your 19" equipment rack? Check out the Adam Hall 19" Rackmount Pull-Out Tray, a standard 1 RU rack tray with drawer slides that mount to both sides.

The rack brackets on the front and back are extendable, allowing the unit to be fitted with rear support to racks of varying depths. The tray is made from black powder-coated steel and provides an adjustable mounting depth from 14.2 to 18.9". With a weight capacity of 55.1 lb and a usable surface of 16.2 x 15" (W x D), the rack tray will house most devices.

Slides Mounted on Both Sides Standard 19" Rack Width Rack Brackets on Front and Rear Adjustable Depth: 14.2 to 18.9" Usable Surface (WxD): 16.2 x 14.9" Weight Capacity: 55.1 lb

Parameters
Material of Construction	0.06" / 1.6 mm Steel, Black Powder Coated
Load Capacity	55.1 lb / 25.0 kg
Dimensions	19 x 1.8 x 14.2" / 48.2 x 4.4 x 36.1 cm Adjustable Depth: 14.2 to 18.9" / 36 to 48 cm Usable Surface (W x D): 16.2 x 15" / 41.2 x 38 cm
Weight	8.1 lb / 3.7 kg
Packaging Info
Package Weight	8.85 lb
Box Dimensions (LxWxH)	22.6 x 16.6 x 3.9"

Related Questions and Answers

Q: 1. Does it lock when it pushed in, and pulled out?

A: No it does not lock but there is a slight snap or pop when the Adam Hall AH-87555 is all the way closed or pulled out.

Q: 2. Will this fit the Soundcraft EPM 12 - 12 Mono + 2 Stereo Audio Console?

A: Yes, the ProX Topload 19" Rackmount Mixer Case (10 RU) will fit the Soundcraft EPM 12 with required optional Rail Kit (B&H # SORKEPM12)

Q: 3. will this work with the soundcraft epm12?

A: The ProX XS-19MIXLT Slant rack case will accommodate the Soundcraft EPM-12.

Q: 4. Will this case fit a Zoom L20 Mixer?

A: The Zoom L20 will fit inside the mixer compartment for the ProX Topload 19" rack mixer case when using the Zoom RKL-12 rackmount kit.

Q: 5. What screw do I need to attach the units?

A: Standard rack screws would work well, for mounting the BLACKJET Rackmount Tray for TX-2DS (1 RU) to a standard equipment rack. Auray RSW-1032-25 10-32 Phillips Rack Screws and Washers (Set of 25) BH #AURSW103225

Q: 6. Will this fit an Element etc 1 light board?

A: No, the ProX Topload 19" Rackmount Mixer Case is much too small for the ETC Element 1. Dimensions of the Element 1 are 32.9 x 17.9 x 5.1" (836 x 455 x 130 mm) for width x length x height and the ProX case accommodates mixers that are 19" wide and up to 17.5" (10 RU) deep. Please contact our lighting department for assistance to find a compatible case.

Q: 7. Will this fit an Allen Heath zed 12 channel mixer?

A: The Zed 12 will fit in this case with this kit: https://www.bhphotovideo.com/c/product/1208253-REG/allen_heath_ah_zed14_rk19_rackmount_kit_for_zed12fx.html/specs

Q: 8. Hello, Will this case fit a Allen&Heath Zed-14 Mixer Board?

A: Yes it will. It is a recommended mixer case for the Allen & Heath ZED-14.

Q: 9. will it fit a mackie fx10 v3 mixer?

A: No, the Mackie ProFX10v3 mixer is not rackmountable and it is also not wide enough to fit in the ProX Topload 19" Rackmount Mixer Case (10RU). However, the ProFX12v3 and ProFX16v3 can be rackmounted when used with the compatible rackmount kit and will fit in the ProX case. If you need a hard flight case for the ProFXv3, you could use the Gator G-MIX 17x18 ATA Hard Transit Case (B&H # GAGMIX17X18).

Q: 10. Is this RGB adjustable or just white & blue light?

A: The color of the Adam Hall Dual Gooseneck RGB and White COB LED Rack Light is adjustable.

Edward	29/09/2024
[8.1 lb / 3.7 kg] The rails actually work with a 32 rack rail spacing although only spec'ed to work to 29. 5

Norman	26/08/2024
[8.1 lb / 3.7 kg] Had to search to find this full depth shelf to fit all my components for a Go-Box of Ham radio equipment. Perfect fit, sturdy and well made. 5

anyonymous	12/08/2024
[8.1 lb / 3.7 kg] Aloha, living in Hawaii, to purchase items like this you can't find it in Hawaii and if you do it's very expensive. You was the only company that shipped to Hawaii and it was free and the price on the case was cheap. I can believe how fast it came in. Mahalo for your service I'd definitely order from you guys again. 5

Scott	28/07/2024
[8.1 lb / 3.7 kg] First time I've assembled some rails for a NAS, but they seemed high quality and are pretty smooth. It was a little confusing about how to install them at first but eventually I got it together and seems like a good solution. 5

Chris	28/07/2024
[8.85 lb] The vented shelf is useful to added custom cable management and mount equipment when required. 5

Tim	27/07/2024
[8.85 lb] A little on the heavy side, but solid as a rock. Well built! Fits my Mackie 16 Channel perfectly. 5

Dave	22/06/2024
[8.1 lb / 3.7 kg] This is a great case; well built, solid, attractive, and perfectly slim for a compact system. With a mixer and controller taking up 7 spaces, there's still plenty of room for cables and a power conditioner. My only concern is regarding the single handle. While effective, a second handle would be nice; With a few pieces of gear mounted inside, the empty weight of 24 pounds quickly gets up to 40+, which can get strenuous on one arm if you have to walk a distance. Still a great product though. 5

John	19/06/2024
[8.85 lb] But its solid and at a great price. 5

JOSH	16/06/2024
[8.1 lb / 3.7 kg] I love this case! My PreSonus mixer was a tad too long to fit the ProX 8U Case, so I ordered this one, and it is another great ProX Case! This ProX mixer case is very well built, my mixer is solidly attached, and now fully road worthy. I will likely order more ProX road cases from B&H- great cases, and fassst delivery! 5