Catering to noise and vibration reduction for shotgun and small diaphragm microphones, the Auray SHM-ESG Shockmount for Shotgun Microphonesfrom Auray SHM-ESG Shockmount for Shotgun Microphonesfeatures ABS plastic construction with heavy-duty elastic bands that suspend your microphone and isolate it from vibrations and handling noise. The shockmount will fit microphones between 0.8 and 1.25" (21 and 31.75 mm). It is fitted with a 5/8" thread for compatibility with most microphone stands, and includes a 3/8" adapter for further compatibility.

Prevents Vibrations and Handling Noise    Fits Mics from 21 to 31.7mm in Diameter    Heavy-Duty Elastic Bands    Locking Knob for Angle Adjustment    ABS Plastic Construction    3/8"-16 Adapter    Shoe Adapter for Camera Mounting

The SHM-ESG eliminates unwanted vibrations that can travel through a mic stand or boom pole and affect the performance of the microphone

Standard 5/8"-27 threaded female metal mic stand adapter fits any mic stand with a 5/8" stud

A 3/8"-16 thread adapter is included for easy boom pole mounting

The angle of the shock mount can be locked into position with the locking knob

Sturdy ABS plastic construction provides a solid frame for the isolating bands and will withstand the impacts from use in the field or during transport

The heavy-duty elastic bands suspend the microphone in the center of the basket, and prevent shocks and vibrations that can travel through the mic stand from reaching the microphone

Related Questions and Answers

Q: 1. Will Scarlett CM25 MkIII fit?

A: The issue with ldc mics is that there is no mounting standards. The Rycote Universal ldc shock-mount is an option: BH #RYINVUSM

Q: 2. Will this fit the Electro Voice RE320?

A: The SHM-SCM1 will be too small for the Electro Voice RE320. I would recommend:BH# AUSSMBC10 http://bhpho.to/19hGgkf

Q: 3. would this fit the Sanken c41?

A: The Sanken CU-41 dimensions: 50mm (2 inches) diameter. Although not tested with this microphone specifically, the Auray mount should be able to accommodate the Sanken CU-41 two-inch diameter.

Q: 4. Will it fit a Neumann TLM 193?

A: This will not work with the Neumann TLM 193.

Q: 5. Would these work well for real ORTF microphone placement (with suitable spacers to raise one up about an inch)?

A: In conjunction with a bar like the Rode SB20 (B&H# ROSB20STEREO ), you could use these Auray mounts for ORTF mic placement. For specialized mics, it is also common to use a suspension like this one, that also comes with a blimp: https://www.bhphotovideo.com/c/product/966593-REG/rycote_080211_ortf_windshield_kit.html?sts=pi For more advice about how to mount your mics for this recording, please reach out to us with the model number of the mics you are using, and a brief description of the space where you will use this setup.

Q: 6. I was wondering if the 3/8 adapter was for ,like tripod screws, and that sort of use...???

A: It will thread onto the end of a boom pole or a mic stand.

Q: 7. Does this Work w/ the At2020

A: The Auray SHM-UC2 would not be recommended for use with the AT2020 due to its larger diameter. There are several options for the AT2020 including the Audio Technica recommended AT8458 https://bhpho.to/2l604lr or the Auray SHM-SCM1. https://bhpho.to/2lNFfts

Q: 8. Will this fit the Neumann U87 and TML103?

A: This mount should fit the U87 and the TLM 103.

Q: 9. Are there instructions on how to install the replacement Suspension Bands for this model?

A: B & H please post the instruction manual for this item in PDF format. There is nothing listed for this product.The Senal SC-550X kit includes this shockmount, but no instructions on how to install replacement Suspension Bands.

Q: 10. Can you hang this upside down from a boom stand?

A: Yes, the mic screws into the mount allowing it to be inverted. The pivot also allows enough movement range for many positions.