Transmit uncompressed 1080p60, 10-bit, 4:2:2 video from up to 984' away to a Ghost-Eye receiver with the CINEGEARS Ghost-Eye Wireless 600MP HD/SDI Transmitter V3from CINEGEARS. It safely can transmit video using its two antennas on up to ten frequencies to any Ghost-Eye receiver. It features one HDMI input, one 3G-SDI input, and one SDI loop output.

Whether you have a point-to-point or point-to-multipoint configuration, your signal is carried with a low-latency rate of less than 1 ms over the license-free 5 GHz frequency band. Small obstacles in the line-of-sight are compensated for by an adaptive signal logarithm keeping your transmitter and receiver connected, and the transmitter also supports optional AES-128/256 signal encryption. For safety, signals dropped due to interference or a loss of line-of-sight are automatically relinked within 1 ms of the obstacle being removed. The 600MP transmitter comes with an L-series battery mount and two antennas.

Uncompressed 1080p60, 10-Bit 4:2:2 Video    984' Wireless Range    HDMI and SDI Inputs, SDI Loop Output    Low Latency of <1 ms, Auto-Relink    Uses License-Free 5 GHz Frequency Band    Adaptive Small Obstacle LOS Compensation    Optional AES-128/256 Encryption    Waterproof and Shockproof Design    L-Series Battery Mount

Receive uncompressed 1080p60, 10-bit, 4:2:2 video from up to 984' away

Cross-compatible with all Ghost-Eye models

Works with multiple receivers simultaneously

Less than 1 ms of latency

Operates on the license-free 5 GHz frequency band

One HDMI input, one SDI input, and one SDI loop output

Adaptive signal logarithm compensates for small obstacles in the line-of-sight

Auto-relink

Optional AES-128/256 signal encryption

L-series battery plate

Related Questions and Answers

Q: 1. it says you can power the transmitter via dtap butcan you power the reciever with a d tap?

A: Yes, both tx and rx can be powered via p tap to 2 pin lemo cables.

Q: 2. how much does an L-Battery Last? NPF-970 or 990

A: We used a SWIT battery Sony equivalent for a hockey game, which is around 3 hours and we had no problems. The Sony 970 should be the same.

Q: 3. Hello! I was curious to what the major difference between an unencryprted transmitter and an encrypted one were, and if the Ghost-eye 600mp receiver would work with this version if it were a unencrypted one?

A: and unencrypted receiver will not work with an encrypted transmitter

Q: 4. How noisy is the transmitter?

A: The noise produced by the CINEGEARS Ghost-Eye 600MP Wireless Transmitter is very low, if barely audible on a microphone.

Q: 5. Which end connects to the camera, the transmitter or receiver?

A: With systems like this you Transmit the signal from the camera to a monitor that has a receiver on it. The Transmitter will go with the camera.

Q: 6. Can this mount to the Movi Pro pop and lock system?

A: That is possible. The FREEFLY Pop-N-Lock Quick Release System, B&H # FR91000205, has both 1/4"-20 and 3/8" threads to attach accessories. You would just need to use something like a 1/4"-20 to 1/4"20 Spigot or articulating arm to connect this to the Pop-N-Lock. 1/4"-20 Spigot - https://bhpho.to/2jdVltE E-Image Mini Arm with 1/4"-20 Studs - https://bhpho.to/2WODQn7

Q: 7. Does this transmit audio over both the SDI and HDMI? My unit does not seem to have audio and I can't find a setting for it.

A: It should transmit audio. Check the output of your camera

Q: 8. Is this compatible with the Cinegears 150m Receiver?

A: No this is Not compatible with the Cinegears 150m Receiver

Q: 9. Which receiver should I use with this transmitter?

A: The Ghost-Eye 600MP Transmitter works with the Ghost-Eye 600MP Receiver. At the time of this posting we do not sell just the receiver. However we do have this same Transmitter in a Kit with a receiver, B&H # CI6635. You may want to consider purchasing this kit for both a Transmitter and Receiver. https://bhpho.to/2BGCwu2

Q: 10. Can the receiver output HDMI and SDI at the same time to enable a loop to another monitor?

A: Yes you can. If using a smallhd monitor you can just run one sdi out to that, and loop out of the smallhd as well.