Receive video up to 3840 x 2160 and output up to 1080p60 from up to 3280' away with this CINEGEARS Ghost-Eye 1000M Wireless SDI Receiverfrom CINEGEARS. This panel is a combination receiver and panel-style antenna that can mount on a light stand and can receive transmitted videos from any Ghost-Eye transmitters, even when moving at high speeds up to 68 mph.

The panel is compatible with 5G transmission systems that can transmit up to UHD 4K 3840 x 2160 resolution, and it supports 3G-SDI output 1920 x 1080p60. The panel supports using an optional CINEGEARS spectrum scanner to find an optimal signal, it provides real-time signal management, and can work with the CINEGEARS redundant management system (RMS). It also supports synchronization data, timecode, metadata, and PTZ commands over wireless transmission.

You can power the panel using the built-in V-mount battery plate, or you can use an optional 2-pin LEMO-type cable with an optional D-Tap source. The integrated mount can be used to mount the panel onto a light stand, and it features a tilting hinge for proper placement.

Extend Working Distance up to 3280'    5 GHz Panel-Type Antenna, No Latency    Receives up to 3840 x 2160 Video    Output up to 1080p60 Video via 3G-SDI    Power using V-Mount Plate or 2-Pin LEMO    Compatible with 5 GHz Spectrum Scanner    Sync, PTZ, Timecode & Metadata Support    Auto-Relink, All Ghost-Eye TX Compatible    Tilting Light Stand Receiver Mount

Related Questions and Answers

Q: 1. can it be used with two receivers at the same time? Which receiver is correct for this transmitter?

A: There must be a one to one relationship between the transmitter and receiver.

Q: 2. Is the power/strength level of the transmitter customizable, or is it always going to consume maximum power from batteries?

A: It does not have power/strength settings.

Q: 3. Which receiver should I use with this transmitter?

A: The Ghost-Eye 600MP Transmitter works with the Ghost-Eye 600MP Receiver. At the time of this posting we do not sell just the receiver. However we do have this same Transmitter in a Kit with a receiver, B&H # CI6635. You may want to consider purchasing this kit for both a Transmitter and Receiver. https://bhpho.to/2BGCwu2

Q: 4. When utilizing the 3G-SDI and HDMI I/O and Cross Conversion is the audio feed brought over as well. EG: Can I output Video/Audio from my camera's SDI and watch/listen to it on my HDMI monitor?

A: Yes, the audio should travel as well when cross converting with this product.

Q: 5. Which end connects to the camera, the transmitter or receiver?

A: With systems like this you Transmit the signal from the camera to a monitor that has a receiver on it. The Transmitter will go with the camera.

Q: 6. how much does an L-Battery Last? NPF-970 or 990

A: We used a SWIT battery Sony equivalent for a hockey game, which is around 3 hours and we had no problems. The Sony 970 should be the same.

Q: 7. it says you can power the transmitter via dtap butcan you power the reciever with a d tap?

A: Yes, both tx and rx can be powered via p tap to 2 pin lemo cables.

Q: 8. Can this mount to the Movi Pro pop and lock system?

A: That is possible. The FREEFLY Pop-N-Lock Quick Release System, B&H # FR91000205, has both 1/4"-20 and 3/8" threads to attach accessories. You would just need to use something like a 1/4"-20 to 1/4"20 Spigot or articulating arm to connect this to the Pop-N-Lock. 1/4"-20 Spigot - https://bhpho.to/2jdVltE E-Image Mini Arm with 1/4"-20 Studs - https://bhpho.to/2WODQn7

Q: 9. Can this device pass full Ancillary Data? Particularly SDI Audio Channels 15&16, the channels used for Blackmagic's CCU data. I know some of these units either compress or strip down the audio channels if they're based on WHDMI chipsets.

A: I dont believe it passes the full ancillary data, not 100% on this. Worked on a set where they requested teradeks for this exact reason.

Q: 10. Do you need the encrypted version in order to be sending timecode?

A: Yes, the encrypted version is required for sending timecode.