The Blue edition Starlight Xpress TRIUS PRO-834 CCD Camera with Autoguiderfeatures a ICX834AL EXview II progressive scan CCD sensor to capture views of the cosmos in 1392 x 1040 resolution through your telescope or astrograph. Utilizing a monochrome sensor allows the system to use 100% of its available pixels for better resolution, and gives you the ability to use filters and filter wheels to isolate specific colors and wavelengths for later stacking in post. An integrated auto-guider output port allows you to easily tether it to your off-axis guider (OAG) to improve tracking accuracy and precision during long imaging sessions. There is also a three-port USB hub that allows you to power and control accessories, like filter wheels and electric focusers, from your computer software utilizing just one USB cable between the camera and PC.

TRIUS PRO-834 Monochrome CCD Camera    1392 x 1040 Resolution    Midi Filter Wheel with Built-In OAG    7 x 1.25" Filter Wheel Carousel    Lodestar PRO Standalone Autoguider

• ICX834AL EXview II progressive scan CCD
• 1392 x 1040 resolution with an 12.49 x 9.99mm active area
• 360 to 1100nM useful spectral response
• Excellent blue light sensitivity and a strong infrared response for both planetary and deep-sky imaging, especially with an H-alpha filter
• Extremely low thermal noise
• CCD temperature monitoring circuit provides regulated set-point cooling of the chip

• Adapters for 1.25 & 2" drawtubes to fit into most telescopes
• Compatible with standard M42 SLR lenses to take pictures without a telescope
• Back focal distance 17.5mm from the barrel front to the CCD ±1mm
• When using with SCT optical tubes, it is recommended that the camera be paired with a focal reducer to speed up the focal ratio for imaging deep-sky objects and a Barlow lens to slow down for f/ value for planetary imaging
• Built-in three-port powered USB hub to power accessories like a filter wheel and electric focuser
• High-speed USB 2.0 interface
• Image download time of typically 8 seconds at full resolution
• Built-in autoguider output is compatible with most mounts
• Single USB cable control for all features to eliminate tangled cables
• Two-stage cooling fan with an argon-filled CCD chamber
• Low power consumption of less than 1.5A @ 12 VDC

• Windows XP, Vista, Windows 7, or Windows 8
• One USB 2.0 port available
• At least 256MB of memory
• Between 1 and 4 GHz Pentium processor speed is recommended
• Minimum of 1024 x 768 resolution monitor with 24-bit color

Related Questions and Answers

Q: 1. What is the compatibility with iPod touch ? I have 4th gen, 6th, and 7th thank you.

A: You can connect an iPod Touch to the MacBook Air M2 to interface with iTunes.

Q: 2. Can I climb apple international warrenty?

A: We do offer Apple care as an optional add on for the Apple 13.6" MacBook Air (M2, Silver). You can add Apple care before checkout by clicking on the "See Options" button just below the green "Add to Cart" button.

Q: 3. Will this work with celestron avx 8-n?

A: The iOptron iGuider Autoguider System has not been tested with the Celestron Advanced VX, so there is no definitive answer for this.

Q: 4. Is the iOptron iGuider Autoguider System compatible with iOptron Skyguider Pro?

A: The iOptron iGuider Autoguider System BH #IO3360 • MFR #3360 Will fit on most finder scope dovetails, so it can be used with most OTAs regardless of size or configuration.

Q: 5. Does the bluetooth allow you to connect with a bluetooth headset?

A: No. The bluetooth on the Pioneer VSX-834 is a receiver so that it will connect to a bluetooth input device like a smartphone or tablet and play the audio from that content through the speakers that are connected to the Pioneer VSX-834.

Q: 6. Work 240 v ?

A: The VSX-834 7.2-Channel A/V Receiver is not compatible with 240V.

Q: 7. Does it include Microsoft Word suite

A: No, unfortunately the Apple 13.6" MacBook Air (M2, Midnight) would require Microsoft office to be purchased separately.

Q: 8. Are the twist locks rubber or metal?

A: Slik Pro Pod CF-834 Monopod inner ring for the twist loks is metal. The outer ring is rubber.

Q: 9. Will this run a 5pin DMX system with a simple 3 to 5 pin converter cable?

A: The CHAUVET DJ Xpress-512S USB to DMX Interface can work with most 5-pin DMX lights. You will need an adapter. These are some adapter options: https://bhpho.to/3KQoaK5.

Q: 10. Can you add more memory or RAM AFTER purchase?

A: No, the MacBook M1 and M2 do not have the option to upgrade RAM or storage after purchase.