Laird 12G-Sdi/4K Uhd Right-Angle Bnc Cable 6' Black

Laird 12g-sdi/4k Uhd Right-angle Bnc Cable 6' Black

Product Code: eq88492
Availability: In Stock

$158.85 $254.16

Qty

15 reviews Write a review

Description
Reviews (15)

The 6' Laird 12G-SDI/4K UHD Right-Angle BNC Cable 6' Blackfrom Laird 12G-SDI/4K UHD Right-Angle BNC Cable 6' Blackis a flexible, lightweight BNC cable that supports up to 12G-SDI/4K UHD video transmissions while measuring less than 1/8" in diameter. This 23 AWG cable consists of a Belden 4855R 4K RG59 sub-mini cable with a right-angle male BNC connector on each end.

75-Ohm Belden 4855R 4K RG59 Cable For up to 12G-SDI 4K UHD Transmissions 1/8" Diameter, 23 AWG Sub-Mini Design Right-Angle Male BNC Connectors Silver-Plated Copper Conductor Duofoil/TC Outer Braid Shield FHDPE Insulation/PVC Jacket Meets ST-2082-1/ST-2081-1/424M Standards

General
Connector 1	1x BNC
Connector 2	1x BNC
Coaxial Type	RG-59
Cable Length	6' / 1.8 m
Environmental
Conductor Material	Silver-Plated Copper
Insulation Type	Foam High Density Polyethylene (FHDPE)
Jacket Type	Polyvinyl Chloride (PVC)
Outer Diameter	0.125" / 3.17 mm
Shielded	Yes
Wire Gauge	23 AWG
Weight	2.5 oz / 71 g
Packaging Info
Package Weight	0.245 lb
Box Dimensions (LxWxH)	8.3 x 8.1 x 1.9"

Sub-miniature Belden 4855R cable supports up to 12G-SDI 4K video
Low-profile, lightweight design

Thin cable diameter of less than 1/8" provides greater flexibility

A right-angle male BNC connector on each end enables neater dressing on your rig

Related Questions and Answers

Q: 1. compatvel com a Blackmagic Pocket 4k?

A: The Tentacle Sync C08 Tentacle to BNC Cable is a bi-directional cable used to feed or accept a timecode signal between a Tentacle Sync timecode generator and a device with a BNC TC in/out port. The Blackmagic Pocket Cinema Camera 4K has a 3.5mm timecode input. The C08 cable will only work if you are using a timecode generator that has a BNC connector.

Q: 2. What latency in the video stream would this introduce?

A: Latency on NDI hardware, like the SCIENCE IMAGE NDI Bidirectional UHD 4K 12G-SDI/HDMI Encoder/Decoder, is going to entirely depend on how good your internet connection is and how good your end users (viewers) are also.

Q: 3. Will this work with a Panasonic AU-EVA? With its BNC timecode in from a Tentacle Sync E Mk II, specifically.

A: Yes, the Tentacle Sync Tentacle to BNC Cable can be used to send timecode signal into the Panasonic AU-EVA1 Cinema Camera's BNC timecode input connection from a Tentacle Sync E.

Q: 4. Can you use this cable for SDI cameras?

A: Yes, this is an SDI rated cable.

Q: 5. What's the flexibility of this cable? Is it like RG-6? I see no AWG reference.

A: The DigitalFoto Solution Limited Canare AR2 12G-SDI Straight to Right-Angle Video Cable (Black, 2.6') is a very flexible, similar to RG59.

Q: 6. will this work to send timecode from Rode Pro RX to C70 ?

A: Yes, the Tentacle Sync Tentacle to BNC Cable (Right-Angle, 16") can be used with the Rode Wireless Pro receiver in TC Only mode.

Q: 7. Could this be used to connect a Black Magic ATEM 4K8 via SDI and send PTZ commands back via NDI?

A: The SCIENCE IMAGE NDI Bidirectional UHD 4K 12G-SDI/HDMI Encoder/Decoder relays NDI commands.

Q: 8. When this is in encode mode, how many channels of audio can be converted from the source input to NDI?

A: The SCIENCE IMAGE Bi-Directional 4K SDI/HDMI Full NDI Encoder/Decoder (B&H# SCSTUDIO4KSH) can accept a two-channel 3.5mm line in for embedding.

Q: 9. Which BNC connector to use? Will King's 2065-11-9 mini fit?

A: The correct connector for this cable is the following Belden https://bhpho.to/2RJYnHU -- but we only carry bulk packages of this and would highly recommend that you contact the manufacturer directly, as these are special order products and cannot be returned.

Q: 10. Would this cable work on a panasonic HPX 170?

A: The Tentacle Sync Tentacle to BNC Cable (Right Angle, 16") can be used with the panasonic HPX 170, which features a BNC output connector.

Paul	24/08/2024
[1x BNC] Conforms to 12G spec. Nicely thin and flexible. 5

tim	21/08/2024
[6' / 1.8 m] A little stiff... but good buy. 5

Luke	13/08/2024
[23 AWG] The cable is shielded and provides a 12G SDI connection from your camera to your monitor. Buy with confidence. 5

steve	16/07/2024
[Yes] Solid and a good price for 12G. Not the thinnest out there but not too thick for gimbal work 5

Awaken	27/05/2024
[6' / 1.8 m] We've been using this to provide a direct feed to monitor from our RED Komodo when mounted to our vehicle rig and so far it's working exactly as it should. Have yet to try in Canadian cold winters but time will tell how it holds up in minus temperatures. Another positive is the flexibility of the cable itself in that it's not too rigid interfering with the gimbal motors. 5