The white Bose FreeSpace FS2P 20W Passive Pendant-Mount Loudspeaker Pairis a pair of passive pendant loudspeakers designed for intelligible speech and background music reproduction in an array of commercial applications. Equipped with a sleek pendant enclosure and a single 2.25" full-range driver, each FS2P speaker yields a 140° conical coverage pattern and a frequency range from 83 Hz to 19 kHz (-10 dB).

It handles up to 20W continuous (80W peak) and is capable of producing a maximum peak SPL of 106 dB (100 dB continuous). The FS2P utilizes an integrated multi-tap transformer, which can be configured for an array of 70/100V settings via a convenient switch beneath the grille. The FS2P is voiced to ensure consistent tonality throughout the FreeSpace FS family, so it can be installed alongside other loudspeakers in the same series without compromising the system's sonic signature.

1 x 2.25" Full-Range Driver    20W Continuous Long-Term Power Handling    140° Conical Coverage Pattern    Integrated Multi-Tap Transformer    Tap Selection via Switch under Grille    Shared Voicing across FreeSpace FS Range    Max SPL: 100 dB Continuous / 106 dB Peak    Stylish Pendant Enclosure    Single-Point Suspension

Maintain consistent tonal quality with shared voicing across all FS models

Full-range 2.25" transducer offers clear voice reproduction and smooth response for background music with a frequency range from 83 Hz to 19 kHz (-10 dB) and broad 140° conical coverage

Stylish pendant enclosure with single-point suspension, perfect for open-ceiling applications or any installation requiring the aesthetic and performance capabilities of a pendant design

Euroblock 6-pin input/thru connector

Updated enclosures pair sleek aesthetics with practical features, including removable logos

EN54-24 for voice alarm systems for fire detection and fire alarm systems for buildings, and UL 1480 UUMW listed for use in fire alarm and signaling systems in life safety applications

Related Questions and Answers

Q: 1. Could the F1 with or without the sub be a replacement gear for bass amp and cab (2X10) as a kit for a bass player...?

A: The F1 is an excellent loudspeaker, but it would not be my choice product to use for a Bass rig. The F1 alone will lack the extended low frequencies you would need as a bass player. Using the sub in this case is recommended if you want to use the F1 to replace a traditional bass head and bass stack.

Q: 2. Hello Can I use two subs and two 812' for a large PA for outdoor concert?I would be mixing guitar, bass, drums, keyboards and vocals

A: I got away with the 2 812s and one sub - outdoor concert for over 200 people - this PA screams. It's amazing - remember though that it is a true front line system which means that it doesn't like microphones in front of it, you really need to use smaller monitors for behind the line. I'm in love with this system and eventually will add the 2nd sub, even though I really don't need it :)

Q: 3. Can I use without a sub for a small party? about 50 people.

A: Yes you can use the Bose F1 Model 812 Powered Flexible Array Loudspeaker for a party of 50 people,

Q: 4. I bought two of these speakers to be used with a Sonos Amp (125W channels). Can/should I bypass the internal transformer?

A: For connection to a Sonos amp, the Bose Freespace 360P Series II Environmental Loudspeaker (Green) should be in a 4-ohm setting. The transformer wattage tap is for the purpose of connecting to a 70V/100V amplifier so that you can keep the speaker limited to a certain wattage, reserving the leftover wattage for connecting other speakers to that same 70V/100V amplifier, which is typically used in commercial retail, grocery stores, and warehouses.

Q: 5. How does this compare with other speakers volume wise? We have two JBL eons 15 that are used for a school's theater production in a standard high school gym. Is this speaker louder, or softer?

A: This is a 1000 Watt system. A pair of these with at least one Bose F1 Powered Subwoofer (B&H # BOF1SW) will blow away a pair of 15' JBL EON's and do it with better mid-range detail and far better angles of coverage. Without the sub, the lows are tight and clean but not full enough most musical applications. With two subs this may be an incomparable system, period. At any rate the arrays without the subs get very loud for a gymnasium set-up.

Q: 6. I was at another music store in my area and they had this setup on the floor and the movable array at the bottom would not stay in place it would snap into the rear position on the bottom of both speakers Is there a fix for this I would hate to spend 4500 for a set and they don't lock after moving then around awhile?

A: We have not experienced this issue.

Q: 7. i have a numark m6 usb mixer with two ndx500 cd units. can i hook two 812's and two f1 sub's to this system ? if so , how ?

A: I assume you are speaking of the powered models. Yes. Take an XLR out of the mixer to the input of the 812 and set for 'line level'. Position the 'EQ' switch to 'with sub'. Connect the outpout of the speaker to the sub input.

Q: 8. Are these only wired or Bluetooth as well?

A: The Freespace 360P Series II Environmental Loudspeaker is a wired speaker for use in outdoor systems. It can be used in-ground or above ground and is designed to blend in with landscaping.

Q: 9. Does this come with a bag / case?

A: No, it does not come with a bag or case, but Bose does offer a good quality travel tote for it: https://www.bhphotovideo.com/c/product/1200241-REG/bose_751863_0010_travel_bag_for_f1_812.html

Q: 10. Works with the Bose Smart Soundbar 900?

A: Yes, according to the Bose website, the Bose Wireless Surround Speakers is directly compatible with the Bose Smart Soundbar 900 model. https://www.bose.com/en_us/products/speakers/speaker_accessories/bose-surround-speakers.html#ProductTabs_tab1&v=bose_surround_speakers_black