Building upon the success of the DJM-V10, the black Pioneer DJM-V10-LF removes the crossfader and extends the channel faders for more volume precision. Some DJs prefer to use the channel faders over the crossfader, as they offer more control to perform smooth blends with tiny adjustments to the volume of each track, or quickly drop sounds into the mix as if playing a musical instrument.

Removing the crossfader from the DJM-V10 affords the updated 60 mm shaft slide faders on the DJM-V10-LF to extend further down the top plate, offering a longer range of movement for better volume control of audio sources. What’s more, an updated fader curve setting has been added to the unit and the faders have been appropriately weighted to enhance the potential offered by their elongated range.

The DJM-V10-LF is well suited for professional DJs, clubs, festivals, mobile DJs, nightclub installations, recording studios, and more. The mixer utilizes a 6-channel layout and an integrated USB soundcard with support for up to 6 stereo channels of 32-Bit / 96 kHz audio and 64-bit internal processing. Its digital throughput also delivers a wide variety of DSP effects.

Many enhancements have been made to the V10-LF including a complete redesign of the mixer's interface, which now includes a 4-band EQ, dedicated high-pass or low-pass filters with resonance, and send FX on each channel. Send FX offers four internal effects with dedicated parameter controls, plus two stereo sends with returns for interfacing with external FX processors such as guitar pedals, studio multi-FX, and more. Additionally, each Send FX (internal or external) can be assigned to one of the six channel strips for even more advanced routing and processing.

Each channel also features a compressor, which is designed for producer/DJs to play unmastered tracks seamlessly, help match older tracks to modern compression standards, or fatten up and tame dynamics. The updated Beat FX can now be accessed via a larger touchscreen for hands-on, real-time manipulation of effects, plus Hi/Mid/Low FX frequency cuts for further performance enhancements. Two independent headphone outputs add control for a dual cueing system, allowing DJs to play seamless back-to-back sets and smooth DJ transitions.

There are four inputs for turntables and six line-level inputs for digital decks. Additional features include Pro DJ Link, six S/PDIF digital input connections, one AES/EBU digital output connection, a DIN MIDI output for synchronizing external hardware effects and sequencers, two top-mounted USB connections, and an additional USB port that supports iOS devices for use with Pioneer's optional RMX-1000 for iPad. An independent send-and-return section allows for external effects to be used simultaneously with the internal effects. The DJM-V10-LF ships with a power cord.

Professional 96 kHz / 32-Bit ADDA    4-Band EQ and 3-Band Master Isolator    HP/LP Filter, Send FX, Beat FX    4 Phono Inputs and 6 Line Inputs    6-Input / 6-Output USB Soundcard    Digital I/O: 6 Coaxial In / 1 AES Out    Dual Stereo Send/Return for External FX    Pro DJ Link Support + MIDI DIN for Sync    Dual Cue Headphone Outputs 1/4" & 3.5mm    Three USB Ports

• Some DJs never use a crossfader, preferring instead to mix with the channel faders because it gives them more control—whether they want to perform smooth blends with tiny adjustments to the volume of each track or quickly drop sounds into the mix as if playing a musical instrument
• Removing the crossfader from the DJM-V10 has enabled the new 60mm shaft slide faders on the DJM-V10-LF to extend further down the top plate than the 45 mm faders on the original mixer, offering a longer range of movement so you can control the volume of the audio source from each channel precisely
• What’s more, a brand-new fader curve setting has been added to the unit and the faders have been appropriately weighted to enhance the potential offered by their elongated range

• Elite sound quality
  • Feel the warmth of natural sound and hear every detail
  • Studio-quality 64-bit mixing and dithering processing, 32-bit high-quality A/D and D/A converters, a low-jitter clock circuit, and many other components all work to produce a full low-end, vibrant mids, and precise highs
• ESS Technology 32-bit D/A converter
  • 32-bit SABRE 8-channel DAC (ES9016S) is used for both the master and booth outputs
  • DAC output is driven in parallel to further improve S/N
  • Honed output circuit by improving op-amps and capacitors and by performing optimal tuning, resulting in low-noise, high-resolution sound that's easy to listen to, even at high volumes
• 32-bit A/D converter by Asahi Kasei Electronics
  • Analog channel inputs use a 32-bit premium ADC (AK5578EN/AK5574EN) with VELVET SOUND technology by Asahi Kasei Electronics
  • Redesigned input differential conversion circuit and optimized audio parts used results in a rich, high-definition and low-distortion sound
• EM Devices' Mechanical Relays
  • Line/phono input switch, master output, and headphones output circuits use high-performance, durable mechanical relays (EA2 relays) from EM Devices Co.
  • Eliminate signal distortion due to the use of nonlinear electrical components, completely canceling unpleasant noise in the mute circuit
• AES/EBU output
  • Master outputs feature a noise-resistant balanced transmission system and a professional digital audio-standard AES/EBU terminal that’s suitable for long-distance transmission in large venues

• 6 channels
  • Choose your ideal setup and plug in everything from CDJs and turntables to samplers, synths, and drum machines
  • Easy setup thanks to analog input terminals that line up with each channel on the top panel, so you’ll always know where to connect your cables when you’re in the booth
• USB/MIDI terminal
  • With a 96 kHz / 24-bit sound card, you can input and output up to 6 stereo channels without any deterioration of sound quality when connected to a PC/Mac
  • Input and output of the send and master signals, as well as the input and output of individual channels, can be routed via USB to your computer
  • Smooth DJ handovers by simultaneously connecting 2 laptops (PC/Mac)
• MULTI I/O terminal
  • USB Type-A terminal and 1/4" TS jacks are mounted on the top and the rear of the mixer
  • Arrange your sounds using the RMX-1000 app for iPad or another FX app, or record your mix directly to the DJM-REC app without any deterioration in sound quality
  • Route insert-type hardware effect units, such as the RMX-1000, through the 1/4" TS jacks
• DIN MIDI Out
  • Sync external production gear using the BPM from rekordbox
  • Quantized BPM information is shared via Pro DJ Link when connected to a LAN hub
  • When not using PRO DJ Link, the DJM-V10’s BEAT FX suite will analyze and display a track’s BPM

• 4-band EQ
  • Sculpt your sound just the way you like it
  • Frequencies, curves, boost, and cut amounts on each band have all been specially designed to give you total flexibility
  • Completely isolate the high and/or low and tweak the two mid ranges to fine tune your mix
  • Midrange EQs have their own custom curves
• Compressor knob on each channel
  • Seamlessly play old or unreleased tracks alongside modern compressed productions
  • Compressor knob on the relevant channel will beef up the audio in real time
  • Quieter tracks will have added loudness, boosting the sound of weaker tracks
  • Mastered music will have a minimal effect
• Channel Fader
  • Each channel is equipped with a newly developed, precise fader that enables fine adjustment
  • Highly stable and durable, faders will still feel smooth even after years of use

• Send section
  • Send audio to one of four built-in FX
    • Short Delay
    • Long Delay
    • Dub Echo
    • Reverb
  • Send audio to up to two pieces of external equipment to create unique sounds and even live remixes
  • Connect guitar pedals, FX units, and more to the TS jack send/return terminals
• Filter
  • Newly developed filter with resonance control
  • Drastically change the sound of a track or subtly tweak it
  • Switch on high- or low-pass filters by pressing either button
  • Turn the knob from all the way to the left (no filter applied) to the furthest position on the right (maximum filter applied)
  • High- and low-pass filters are separated, offering twice the resolution to play with compared to the filter on the DJM-900NXS2
  • Allows for more pronounced adjustments
• Beat FX
  • Control the X-Pad via the touch display for more intuitive effects manipulation
  • Bring harmony to sound sources such as vocals and synthesizers to create unique sounds
  • Directly select the channel you want to add the effect to with the BEAT FX Assign button
  • Added Shimmer effect that adds brightness to the original audio

• Effortlessly control the tone of your entire mix
• 3-band master isolator features boost/cut curves and adjustments to the crossover frequencies
• Grab the large dials and drastically changing the sound for immediate tension and release

• Dual Headphones Output
  • Plug in your headphones at the same time as another DJ for independent monitoring
  • Headphones' output has its own Cue/Master Mix control and level adjustment knob
  • Choose what you want to hear as you prepare to take over the decks, or during back-to-back sets
• Booth EQ
  • Tweak the sound from the monitor speakers to prevent ear fatigue during long sets

• Lockable power cord included for added reliability
• Helps prevent accidental disconnections

• Record and archive your mixes via iPhone or iPad
• Upload your sounds to cloud services
• Effortlessly live-stream your sessions

• Make full use of rekordbox's low-latency DVS feature for intuitive, smooth scratching

• Use Serato DVS to control and scratch with CDJs or turntables
• Serato DJ Club Kit license required and available separately

• Enjoy DVS control via Native Instruments’ TRAKTOR PRO 3 (available separately)
• Intuitively control and scratch with digital audio files stored on your computer

• Supports the extended PRO DJ LINK ShowKontrol protocol
• Enables DJs, technical producers, LJs, and VJs to use all the key information from the DJM-V10, such as fader and knob positions, to align sound and visuals. and to create mind-blowing shows

Related Questions and Answers

Q: 1. Hi my name is tarang i have questions about this product can i use in concert & show ? Please reply to this question I was thinking of buying

A: Thank you for your question. This state of the art DJ system will work great for live events or concerts.

Q: 2. It is valid for 220 ACV??

A: You will need to use a step-up transformer to use the M6 USB on a 220V current.

Q: 3. Can i please have a list of all compatible DJ software and mac os x for this product old and new? Thank you

A: The Numark M6 has a built in audio interface that can be used to record to virtually any audio recording application. It does not interface with any DJ software directly.

Q: 4. In which channel is mic 1?

A: Mic 1 is not part of the audio input channels 1-4.

Q: 5. Is this compartible with serato dj pro ?

A: According to Pioneer DJ, Serato DJ Pro may not work properly with the DJM-750MK2 mixer as the application has not been certified under the Pioneer DJ Certification Program.

Q: 6. Electrical powered by transformed and is valid for AC 220 V ? , I m from spain

A: You will need to use a step-up transformer to use the M6 USB on a 220V current.

Q: 7. Is not clear if this mixer has also a Bluetooth output. I want to connect the mixer's main output to my Bluetooth monitors via Bluetooth without cables. Is that possible? Or this mixer has only Bluetooth input?

A: The Reloop RMX-10 BT 2-Channel Bluetooth DJ Mixer has a built-in Bluetooth receiver intended for sending audio to the mixer from Bluetooth-enabled devices like smartphones, tablets, or computers. It does not have a Bluetooth transmitter to send audio out of the mixer wirelessly via Bluetooth, but you could try using a separate device such as the Aluratek ABCD54F Switchable Bluetooth Audio Transmitter and Receiver (B&H # ALABCD54F) which will transmit audio to two Bluetooth-enabled devices simultaneously up to 100 feet away.

Q: 8. Vale para 220 v????????

A: You will need to use a step-up transformer to use the M6 USB on a 220V current.

Q: 9. Ordered 1 of these and the outer box shows 110V the specs show 110-240V. Can it handle both; yes or no?

A: Per the manual, this unit should be 110-240v.

Q: 10. Can this mixer be used with Rekordbox free of charge if used together with two Pioneer XDJ 1000 mk2?

A: Yes, the Allen & Heath XONE:PX5 - 4+1 Channel DJ Mixer with Soundcard could be paired with two Pioneer DJ XDJ-1000MK2 High-Performance Multi-Player DJ Decks, which allow access to and performance control of the free version of rekordbox via LAN connection.