The Core SWX HyperCore NEO 150 Mini 4-Battery Kit Fleet Q Chargerfrom Core SWX HyperCore NEO 150 Mini 4-Battery Kit Fleet Q Chargeris a compact 14.8V, 147Wh lithium-ion battery that features a V-mount, and it supports a constant 12A draw with a peak draw of 16A. With this high output, the battery is designed for cine and broadcast applications, as well as mobile and field applications. The battery is ultra-compact, so it's also highly suited for gimbal, drone, and other mobile applications. The Hypercore NEO 150 Mini has the ergonomic design, large backlit LCD, and protective overmolded rubberized housing that Hypercore batteries are known for over their past releases.

It's microprocessor-driven like previous Hypercores, ensuring safety and runtime delivery to camera viewfinders or LCDs, but, leveraging the microprocessor, the NEO 150 Mini features an RFID transmitter on the front that lets you monitor the stored battery data via Core SWX's VoltBridgeID iOS app or an RFID reader. The NEO 150 Mini has a more modular design consisting of less cabling, allowing for increased quality. With the cells and different parts installed separately and securely inside the housing, the chance of failure is reduced in case of drops, and servicing the battery becomes a simpler, more efficient process as the different parts install plug-and-play.

In addition to the large LCD, the Hypercore NEO 150 Mini has an LED gauge on the side to quickly spot battery level status. Other features include 2000 charge/discharge cycles, hibernation mode, and the ability to communicate to cameras as well as chargers with both one- and two-wire protocols (see the Features section below). The NEO 150 Mini also provides a SmartTap D-Tap port and a 5V USB port for powering/charging devices, and you can use the USB port to upgrade the battery's firmware. The SmartTap port lets you power any 12 VDC accessory and transmit battery data if the accessory is able to communicate that information.

4 x HyperCore NEO 150 Mini Batteries    Fleet Q 4-Position V-Mount Charger    Simultaneously Charge All 4 Batteries    12A Continuous Draw, 16A Peak    Carry Handle & Status LEDs on Charger    RFID Battery Vitals Transmitter

The Hypercore NEO 150 Mini is a 14.8V, 147Wh lithium-ion battery supporting a 12A continuous draw and 16A peak draw.

A multipurpose backlit LCD provides nominal runtime based on a 25W load, remaining runtime once connected to a device, and remaining charge time when on a charger.

The Hypercore NEO 150 Mini can communicate to cameras as well as chargers with both one- and two-wire protocols.

The packs go to sleep/hibernate when there is no battery usage or movement after a 48-hour period. Once the battery is picked back up, it awakens.

Integrated "smart" D-Tap connector allows users to power any 12 VDC device while also receiving all battery data from the port.

The 5V USB port allows powering any USB accessory on the set as well as charge mobile devices.

The NEO 150 Mini is firmware-upgradeable via its USB port.

Overmolded, nonslip rubberized housing helps provide cell protection against accidental impacts.

The Hypercore NEO 150 Mini incorporates Storage Mode to protect self-discharge and help comply with travel regulations.

Related Questions and Answers

Q: 1. What's the proper storage level for these? 30% charge? 50% charge? 100%?

A: the recommended storage level for most lithium V mount batteries is 20%-30%

Q: 2. Can this battery legally travel airborne?

A: You will want to check with your airline directly as restrictions on batteries frequently change. At this time you can travel with batteries that are above 100 Wh, you may just need to first get approval from the airline.

Q: 3. How long does it take to fully recharge a 98Wh Battery? Can it charge both batteries at the same time?

A: The Core SWX GPM-X2S can charge a single battery at a 3A rate or two batteries simultaneously at 1.5A. One 98wh pack can charge in under 2.5hrs.

Q: 4. Can I use the Core SWX PB70C15 D-Tap Wall Charger on the Core SWX Neo 150 Mini 147Wh battery?

A: The Core SWX Hypercore NEO 150 Mini 147Wh Lithium-Ion Battery (Gold Mount) does not list compatibility with the Core SWX PB70C15 D-Tap Wall Charger.

Q: 5. Will this work with Sony FX6?

A: Yes, Batteries like the Core SWX Hypercore NEO 9 Mini 98Wh would work with the Sony FX6. However, You will need a Dtap cable or mount that matches the Gold mount of the Core SWX battery. Gold mount battery adapter for the FX6 - Wooden Camera Battery Slide Pro for Sony FX6 (Gold Mount) BH #WO283100 Dtap cable only - SHAPE Regulated D-Tap Power Cable for Sony FX6 (15", 19.5V Out) BH #SHFX6PC

Q: 6. Can these power the ikan Rayden RB5 Bi-Color Half x 1 Studio & Field LED Lights?

A: Yes, the Core SWX Hypercore NEO 9 Mini 98Wh 2-Battery Kit with Dual Charger (Gold Mount) can be used to power the ikan Rayden RB5 Bi-Color Half x 1 Studio & Field LED Light using the light's included gold mount plate.

Q: 7. Can i charge this battery via the usb-c port?

A: No, the Core SWX Hypercore NEO 9 Mini 98Wh Lithium-Ion Battery (V-Mount) cannot be charged via the 5V USB ports.

Q: 8. Why does it say: "Add four high-capacity compact batteries to your kit with this Core SWX Hypercore NEO 9 Mini 98Wh 2-Battery Kit with Dual Charger" when therw are only 2 batteries listed?

A: There may have been an error which has now been corrected.

Q: 9. Can these take a charge via the P-tap?

A: According to the The V-plate adapter manual there's no pass through to charge via P-TAP. I'm guessing this would be the same. You'd have to call the manufacturer to confirm.

Q: 10. Is this battery compatible with SONY FS7MARK2? If yes with witch v mount battery adaptor works well

A: Yes, with the proper V-Mount plate. Here is a great option for that. https://bhpho.to/38F572L