The white Black Box GigaBase Cat5e 350MHz Ethernet Cable 1000ft Whitefrom Black Box GigaBase Cat5e 350MHz Ethernet Cable 1000ft Whiteis tested to 350 MHz, so you can use it 10/100/1000BASE-T networks and other high performance applications. It comes in a 1000' length and is marked off every 2', so you can make cables of any length as needed and is packaged in a simple pull-through designed box to keep this bulk cable free of kinks and knots. It follows the Cat5e standard and has been constructed using four unshielded twisted wire pairs wrapped in a sturdy PVC (polyvinyl chloride) jacket that feature 24 AWG stranded bare copper conductors and is rated to 32°F for low temperature handling.

Cat5e Standard    1000' Length    Four Pairs of Unshielded Twisted Wire    350 MHz Transmission Speed    Designed for 10/100/1000BASE-T Networks    24 AWG Solid Bare Copper Conductors    Rated to Work at 32°F    Cable Marked Off Every 2'    Accu-Pull Measuring System

• Sweep tested and characterized to 350 MHz
• Cat5e compliance means dependable compatibility for future applications
• Ideal for voice, 10BASE-T, 4/16 Mb/s Token Ring, 100BASE-TX, 100 Mb/s TP-PMD, T1, 155 Mb/s ATM, 622 Mb/s ATM
• Low attenuation and power-sum crosstalk characteristics over an extended frequency range
• Longitudinal rip cord for easy jacket opening
• Accu-Pull measuring system
• Descending sequential 2' markings on cable
• TAA compliant, GSA certified, and Component Level verified

• Backbone
• Floor-to-floor backbone
• Horizontal cabling to desktop

• TIA/EIA-568-C.2 Category 5e
• EN50173, EN71-3
• EPA 3050B
• PVC: UL 1666; Plenum: NFPA-262
• ETL Verified
• RoHS: 2002/95 EC
• PVC: CMR; CSA, CMG; Plenum: CMP

This cable is tested to 350 MHz so you can use it in 10BASE-T to 1000BASE-T networks and other high-performance applications. Plus, it has plenty of extra headroom over the CAT5e standard, giving you lots of room for growth.

This cable comes in easy-to-use pull-boxes and features the Accu-Pull measuring system. The cable is marked in descending two-foot increments so you always know exactly how much cable is in the box.

The PVC cable features polyolefin insulation and a flame-retardant jacket. The plenum cable has FEP insulation and features a compound jacket that's rated to 32°F for low-temperature handling.

Related Questions and Answers

Q: 1. Can this be mounted on Drywall only or Studs? Also do you have a plate cover? What TV stand would work with this.

A: Per Peerless: Position horizontally or vertically to create the best lookInstalls between 16" (406mm) wood stud centers when positioned verticallyCable ties and grommet included for an organized finishHeavy gauge cold rolled steel constructionSleek design makes outside cable covers unnecessaryComponent cables routed inside the wallLow-profile design fits behind the thinnest mounts and flat panel displays15 Amp/125 Volt duplex receptacle power source with surge protection with NEMA 5-15R. https://docs.peerless-av.com/SELL%20SHEET-LIT0677-1-1.1-1.PDF https://docs.peerless-av.com/INSTR%20SHEET-120-9104-1-2.PDF

Q: 2. Will this work for the Rebel T3i?

A: No, the Canon EOS Rebel T3i would take the LP-E8 battery model.

Q: 3. does this have a finished trim piece?

A: This unit is just the accessory box and mounting hardware.

Q: 4. will this mount work with this camera? BH #HI82LSUSL28B • MFR #DS-2CD2387G2-LSU/SL 2.8MM (BLK)

A: The Hikvision CB135B Wire Intake Box (Black), BH # HICB135B, is compatible with the Hikvision ColorVu DS-2CD2387G2-LSU/SL 8MP Outdoor Network Turret Camera with 2.8mm Lens (Black), BH # HI82LSUSL28B.

Q: 5. Does this require a 1/2" or 3/4" connector?

A: The hole is a 3/4" that you can run a pipe right into it.

Q: 6. Will this fit a DS-2CD2185FWD-I dome?

A: Yes

Q: 7. How many matted prints does it hold on average?

A: I dont use matted paper. I only print on luster. But right now I have about 30 prints in there and still have room.

Q: 8. Is this compatible with DS-2CD2386G2-I?

A: Yes the Hikvision AcuSense DS-2CD2386G2-I 8MP Outdoor Network Turret Camera with Night Vision is compatible with the Hikvision CB135 Wire Intake Box (Black) B&H # HICB135B.

Q: 9. For DS-2CD2386G2-I the hikvision product page says CB135 but the fall catalogue says CB140PT. Will they both work?

A: I only see the CB140PT listed for these turret cameras: DS-2CD2346G1-I DS-2CD2346G1-I/SL DS-2CD2346G2-I DS-2CD2346G2-I/SL https://us.hikvision.com/sites/default/files/manual/hikvision_fall_2020-final_v2.pdf

Q: 10. Can you install power and low voltage cable in the same box?

A: Yes: Suitable for routing low-voltage cables such as HDMI or RCA through the wall I Includes a receptacle knock-out for adding an optional duplex power module.