Teradek Spark 4K Transmitter Receiver Set

Teradek Spark 4k Transmitter Receiver Set

Product Code: eq89181
Availability: In Stock

$3,270.00 $4,120.20

Qty

10 reviews Write a review

Description
Reviews (10)

Transmit lossless HD video up to 500' to monitor video wirelessly using the Teradek Spark 4K Transmitter Receiver Setfrom Teradek. The Spark 4K transmitter can input up to 4K30 10-bit 4:2:2 HDR video via HDMI and transmit visually lossless video to up to two Spark 4K receivers with zero delay. The transmitter unit provides a powerful signal that can travel up to 500' line of sight and features a bright OLED display to view the unit status.

The Spark 4K transmitter features internal antennas, which makes it ultra portable, and it allows you to extend video to a display without any cabling. Built-in AES-128 encryption protects your video from prying eyes, while noise rejection keeps your video clean no matter how many devices are using the 5 GHz wireless spectrum.

The Teradek Launchpad app for iOS or Android that easily connects to the transmitter via Bluetooth, which provides channel-selection tools, monitoring, and remote configuration. There are 1/4"-20 and M3 mounting threads to mount your transmitter on a variety of cameras, cages, or rigs. It's powered using a separately available USB Type-C power source.

Transmitter & Receiver Unit Set Transmit Video up to 500' Line of Sight Supports up to 4K30 HDMI, 10-Bit 4:2:2 Transmitter Sends to up to 2 x Receivers Operates on Free 5 GHz Band, Zero Delay Portable Design, Internal Antennas Controlled with Launchpad App AES-128 Encryption, OLED Display

Key Specs
Video I/O	1x HDMI 1.4b Input
Embedded Audio	HDMI: 2-Channel
Latency	< 0.01 ms
Video Format	HDMI (10-Bit 4:2:2) UHD 4K: 30/29.97/25/24/23.98 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480p: 60/59.94 576p: 50
Power Consumption	5 W
Inputs / Outputs
Antenna I/O	No
Video I/O	1x HDMI 1.4b Input
Embedded Audio	HDMI: 2-Channel
Audio I/O	No
Power I/O	1x USB-C Input
Other I/O	1x Micro-USB Input
Encryption	, 128-Bit AES
Wireless
Wireless Range	500' / 152.4 m (Line-of-Sight)
Channel Bandwidth	40 MHz
Frequency Range	Non-DFS Frequencies US: 5.19 to 5.23 GHz US: 5.75 to 5.79 GHz DFS Frequencies US: 5.27 to 5.67 GHz
Latency	< 0.01 ms
RF Power	19 dBm
Wi-Fi	No
Bluetooth	No
Cellular Support	No
Format Support
Video Format	HDMI (10-Bit 4:2:2) UHD 4K: 30/29.97/25/24/23.98 1080p: 60/59.94/50/30/29.97/25/24/23.98 1080i: 60/59.94/50 720p: 60/59.94/50 480p: 60/59.94 576p: 50
Audio Format	2-Channel 24-Bit 48 kHz PCM Audio
Wireless Video Compression	Uncompressed
Timecode Support	Yes
Power
Power Consumption	5 W
Environmental
Environmental Protection	No
Operating Temperature	32 to 72°F / 0 to 40°C
General
Material of Construction	Plastic
Dimensions	3.4 x 2.7 x 0.05" / 87 x 68 x 1.22 mm
Weight	5.57 oz / 158.00 g
Packaging Info
Package Weight	1.555 lb
Box Dimensions (LxWxH)	9.9 x 7.5 x 3.4"

Related Questions and Answers

Q: 1. I see the Ace750 comes with one power supply for the receiver. Can I purchase a 2nd power supply to power the transmitter?

A: Yes, you can use an additional Teradek NIBL 056 AC Adapter (18W, 6' Cable), B&H # TE110058, to power the transmitter in the Teradek Ace 750 HDMI Wireless Video Transmitter and Receiver Set.

Q: 2. If the battery is finished, does it works when powered with 5v 2a, or it needs more? What are the min and max power input values?

A: No, the Teradek Spark 4K Transmitter (B&H# TE101856) specifically requires a USB PD power source, as can be seen on pp. 2-3 of the manual: https://bhpho.to/3DW1q7u A good option for powering it in the field would be to use the Belkin Boost Charge USB Type-C Power Bank (20,000mAh, 30W) (B&H# BEBPB002BTBK): https://bhpho.to/3xeqtBk

Q: 3. Do you have list of compatible cameras?

A: The Teradek Ace 750 HDMI Wireless Video Transmitter and Receiver Set works with cameras and all devices that produce a signal with HDMI.

Q: 4. Does the HDMI signal of this device contain audio? Can you monitor the camera audio through the receiver?

A: The Teradek Ace 750 HDMI Wireless Video Transmitter and Receiver Set does transmit audio that is embedded into the HDMI signal. You will be able to monitor the audio output from the receiver. You may need to work with a monitor to de-embed the audio from the signal and provide a headphone port like the Portkeys LH7P below: PORTKEYS LH7P 7" High-Bright Touchscreen Monitor with Wireless Control (Black) BH #POLH7PB

Q: 5. Will the TX work with a Bolt Receiver?

A: No. The following units run off of two different protocol systems.

Q: 6. Important question.. For how long can the unit operate continuously before it overheats?

A: B&H does not perform bench tests on products. According to manufacturer tests, the product has undergone testing that saw it running for over a week in standard operating conditions and no issues have been reported, including overheating.

Q: 7. How many Teradek Spark 4K transmitter/receiver sets can you use at the same time?

A: the unit will accommodate 4 sets in same location anything more than that we would suggest the following. Review the 4k bolt 750 series

Q: 8. can somebody recommend a usb-c to d-tap power cable for the transmitter, Because I'm looking to plug the transmitter into a V-mount battery to charge?

A: Here are several options: GyroVu D-Tap to USB Type-C Regulated Adapter Cable (30") https://www.bhphotovideo.com/c/product/1385338-REG/gyrovu_gv_dtap_usbc_d_tap_p_tap_to_usb_c_30.html Kondor Blue D-Tap to 5V USB Converter Cable for Gold Mount/V-Mount Battery https://www.bhphotovideo.com/c/product/1537916-REG/kondor_blue_kb_dtapusb1_d_tap_to_5v_usb.html Tether Tools ONsite D-Tap to USB Type-C PD 90W Adapter https://www.bhphotovideo.com/c/product/1538641-REG/tether_tools_sdac14_onsite_d_tap_to_usb_c.html ANDYCINE D-Tap to USB/DC Barrel/D-Tap Power Adapter/Converter https://www.bhphotovideo.com/c/product/1607529-REG/andycine_a_d_usb84_d_tap_to_usb_adapter.html https://www.bhphotovideo.com/c/products/Adapter-Cables/ci/3728?filters=fct_device-connectivity_4067%3Astandard-usb%2Cfct_power-connectivity_4066%3Apower-tap-male

Q: 9. Is there a USB power bank you recommend that will charge the transmitter while in use?

A: If you wanted to power or charge Teradek Spark 4K Transmitter/Receiver you could work with this. https://bhpho.to/3Hfd0dy

Q: 10. does this come with 2x barrel connector to dtap power cables? Or just one? Also does it come with a case of some kind?

A: The Teradek Ace 750 HDMI Wireless Video Transmitter and Receiver Set comes with one D-Tap cable and a single power supply. The kit does not include a case or a bag. If you would like another power supply, here's an option: the Teradek NIBL 056 AC Adapter (18W, 6' Cable), B&H # TE110058.

Julius	23/08/2024
[40 MHz] I love this set of Transiers. Very easy to setup and run. In fact, no setup is required! Pairing is almost instantaneous. They do get hot during use and the internal fan is quite. 5

Mark	07/08/2024
[1x USB-C Input] The Teradek Ace 750 worked perfectly. I had it shipped to an event we were working at. I was anxious to try it out and had it ready to go quickly. Another review said I should update the Firmware first but I wanted to try it out. As soon as both units were powered-on the two Teradeks were connected! I was actually amazed, I didn’t have to pair anything. Like my old units (another brand). It is supposed to be “line of sight” connectivity, so we tested it. We were in a large hotel ballroom, the guy with the gimbal and Teradek transmitter walked outside into the corridor, it was about 40-ft before it finally lost the signal. Pretty impressive. All-in-all I highly recommend the Teradek. Side note… I also purchased the L-Bracket Battery Adapter Plate for Sony NPF batteries! 5

Jeff	24/07/2024
[HDMI: 2-Channel] Works like it should ! 5

PTP MEDIA	19/07/2024
[HDMI: 2-Channel] I tried the Hollyland Mars 4K units and they were decent. However, we do a lot a band shots in our production and the delay was noticeable. I wasn't happy with that. These units have no delay at all on our screens and have been very pleased so far. They do get hot but that didn't affect performance. Having our camera operator be able to go anywhere in our event tent without wires gave us a great advantage with the shots we were able to get. Best part, NO WIRES! Charles PTP MEDIA 5

Andre	12/07/2024
[HDMI: 2-Channel] I rent my studio out to other photographers, instead of leaving out my pocket wizards or godox triggers. I bought these little guys. They attach straight to the strobes power cable and into the light. I have a few back ups also. Great for beginners that need something to plug and play. 5

Jose Cañas	17/06/2024
[, 128-Bit AES] I have two systems of these Spark transmiter /reciever set, they work great, the only thing that I would like to change is the battery life...it is to short, to go through a complete streaming event. To fix this I purchased a power bank and I connect it to the usb port in the transmiter...it works very well. 5

Gerald	16/06/2024
[, 128-Bit AES] Officially Teradek says there is less that 1 millisecond of delay but I couldn't see any delay with my eyes. This is a big step up from other wireless kits from folks like Hollyland that claim .08 seconds but in reality it's more than like twice that. This really doesn't have any latency. The feed is so instant that you can pull focus with the Spark 4k. Even though they don't exactly bill this as a system to pull focus. They seem to be pushing this as more of a live stream or event solution. However wireless video systems designed specifically to pull focus are so incredibly expensive but I'm happy to say you can use this in your regular video production shoots to pull focus without issue. The other big selling point for me was the quality of the actual video stream you get. You can get up to 4k 30fps 10bit 4.2.2 in the actual stream. Again, this is a big step up from most system that only offer 1080p 60fps max with video quality that is just terrible. I am not a wireless video guru so the fact that these were so incredibly easy to get up and running sealed the deal for me. Literally just turned on both units and they automatically synced up. No extra button presses to get things running. Nothing to really setup in any menus. Just turn them one, briefly wait and your video signal is flowing. 5

Xin	06/06/2024
[1x USB-C Input] Work great with my strobe lights. The receiver can plugin directly to the power which makes it much better than the battery-powered unit. 5

Marcos	25/05/2024
[HDMI: 2-Channel] This will power the Teradek Bolt 500 LT 3G-SDI Wireless Transmitter with a Panasonic battery. Works as expected. Only thing is how expensive it is for something that probably cost about $10 to make. 5

Ioan	21/05/2024
[HDMI: 2-Channel] Works as described so far with no noticeable lag between spark 4k transmitter/receiver camera and the other SDI camera. 5