The PortaBrace Camera Cloak for Panasonic AK-UC3300is suitable for use with outdoor stadium cameras that have ENG lenses mounted. It protects the AK-UC3300 from rain and snow and features long sleeves and internal pockets for optional hand warmers, keeping the camera and operator dry and warm.

The cover is made from breathable Taslan fabric that allows camera heat to escape without letting moisture through. Pull ties allow you to cinch the cover to keep out the elements, and a clear vinyl window allows the tally light to show through. The waterproof fabric is lined with tricot for a soft interior that won't scratch the camera or operator.

Triple-Layer, Waterproof Fabric    For Tripod-Mounted Panasonic AK-UC3300    Fits Flat-Screen Monitor Displays    Rain and Snow Protection    Helps Keep Camera and Operator Dry/Warm    Pull Ties Cinch Cover to Camera    Vinyl Window for Tally/Camera Controls

• For tripod-mounted cameras with ENG lenses
• Triple-layer, waterproof, and breathable material
• Designed to fit flat-screen monitor displays
• Clear vinyl window for tally light and camera controls
• Rain and snow protection for the Panasonic AK-UC3300
• Water-resistant and breathable, the cloak allows camera heat to escape
• Incorporates pockets for air-activated hand warmers (not included)
• Helps keep the camera operator dry and warm
• Clear vinyl window at the back of the cloak allows full view of camera controls

Related Questions and Answers

Q: 1. can you mount an ak45 capsule on this mount? or does it need another power capsule behind it?

A: The KM 145 is a modular microphone system. Consisting of the AK 45 capsule mounted a top the KM 100 phantom power supply output stage. So it does not need another power supply. The KM 100 is always the output stage for the currently available 7 different capsules. Available are omni diffuse-field equalized, omni free-field equalized, cardioid, wide-angle cardioid, cardioid with bass roll-off, hypercardioid, and figure-8. In addition there are accessories available for different applications. Such as swivel mounts, table stands, goose-necks, stereo mounts, etc.

Q: 2. Could this also be used with a Sennheiser DMS rig (with 2 MKH8040s and an MKH30) in a Cinela Pianissimo blimp? I assume so but didn't know if length would be an issue.

A: In theory the Schoeps AK DMS 3U Adapter Cable could also work with a Sennheiser DMS rig, if that rig also summed the microphone signals into a 7-Pin XLR male output connection.

Q: 3. Is it compatible with Godox AD100?

A: The Godox AK-R21 Projection Attachment for Flash Heads is compatible with the AD100.

Q: 4. Is this compatible with the Godox R-1?

A: The Godox AK-R21 Projection Attachment for Flash Heads is not compatible with the Godox Round Mini RGB LED Magnetic Light.

Q: 5. Hi, will it be possible to use AK-R21 with bowens adapter? (For example, godox sa-17). Thanks!

A: No, the Godox AK-R21 Projection Attachment for Flash Heads is not compatible for use with a Bowens mount adapter.

Q: 6. The bottom opens for a mono or tripod connection?

A: Yes, The PortaBrace Compact HD Rain Slicker for Panasonic HC-X2000 Camera will allow you to connect the camera to a tripod with the cover on camera.

Q: 7. According to the specs, the interior is longer than the exterior. That seems wrong! What is the interior length?

A: The correct dimensions of the PortaBrace Camera Case for Panasonic HC-X2 or HC-X20 (Black) are: Interior 20.5 x 10.5 x 10" / 52.1 x 26.7 x 25.4 cm Exterior 22 x 9 x 8.5" / 55.9 x 22.9 x 21.6 cm

Q: 8. Is it possible to create your own slides for this projector? Will 35mm slides work, whether in a mount or not?

A: Godox does not indicate the size of the slides included in the Godox AK-R21 Projection Attachment for Flash Heads, but they are not standard-sized 35mm slides. That being said, if you do not mind cutting down a standard 35mm slide to the size of the slide holder included in the above kit, then they may work with the Godox AK-R21. Do note it appears you would have to use unmounted slides.

Q: 9. Why do you separate this out from the Godox AK-R1 kit. At Amazon the case is part of the AK-R1 package--I think that's the way Godox ships it. I've not seen B&H do this in the past?

A: The case is included with The AK-R1 Accessory Kit

Q: 10. what is the slide size for this projection, are those standard gobo sizes? i want to buy this to use with standard gobos souch as a small circle, long vertical line etc. so wondering if i can buy those gobo slides separately

A: There are several slide kits for the AK-R21 Projection Attachment, which are proprietary. https://bhpho.to/3WLSz0a