The Atech Flash Blackjet DX-1AT Atomos Master Caddy II SSD Readerfrom Atech Flash Blackjet DX-1AT Atomos Master Caddy II SSD Readerfits into a TX-2DS or TX-4DS Cinema Dock. Supporting Master Caddy II and SSDmini media, this module reaches read speeds of up to 560 MB/s. The rugged metal enclosure ensures durability and longevity with vent holes that increase heat dissipation.

For TX-2DS and TX-4DS Cinema Docks    Supports Master Caddy II & SSDmini    Up to 560 MB/s Read Speeds    Rugged Metal Enclosure    Vent Holes

Master Caddy II

Sony SSDmini

Angelbird SSDmini

Related Questions and Answers

Q: 1. Hi - using this device, are drives hot swappable if not in raid mode?

A: Yes, see pg. 13 of manual: https://www.bhphotovideo.com/lit_files/640718.pdf

Q: 2. Is it possible to transfer all data from the old hard drive to the new SSD, and how is it working? Thank you

A: Yes, it is possible to use the Atech Flash Technology Blackjet VX-2SSD USB 3.1 Gen 2 Type-C RAID Enclosure BH #ATBJ0200R01 to transfer data from a hard drive to a SATA SSD. You would use a program like Acronis to clone the drives.

Q: 3. What type of connection does this have to interface with your computer? USB-C? Thunderbolt 3?

A: The Atech Flash Technology BLACKJET DX-1SSD 2.5" SSD Card Reader Module is meant to be used with the TX-4DS Cinema Dock. There is no interface with this enclosure and you will need a separate SATA Drive Adapter Cable.

Q: 4. What screw do I need to attach the units?

A: Standard rack screws would work well, for mounting the BLACKJET Rackmount Tray for TX-2DS (1 RU) to a standard equipment rack. Auray RSW-1032-25 10-32 Phillips Rack Screws and Washers (Set of 25) BH #AURSW103225

Q: 5. Is the ssd adapter the same as the module, or are they different accessories? Does it come with one?

A: If you would like to use standard internal 2.5" SSD drives with the Atech Flash Technology Blackjet TX-2DS this is the adapter required - https://bhpho.to/3EJzeVA

Q: 6. Will this work with a USB-c male to USB 3.0 male cable plugged into a usb 3 port? If so, what transfer speed could I expect?

A: This Atech Flash Technology Blackjet VX-1C CFast 2.0 USB 3.1 Gen 2 Type-C Card Reader has data transfer speeds up to 525 MB/s with its default configuration and hardware--including a USB-C version 3.1 cable. Using other hardware will change this potential transfer speed if the cable cannot keep up with the reader. Whatever speed your cable is rated at would become the weakest link and determine what speed the rest of the equipment can function at. Using an alternative USB 3.0 cable can potentially provide up to 640MBps transfer speeds so it likely would not hinder this card reader in any way like the included USB-C 3.1 cable.

Q: 7. Do the drives go entirely inside of the enclosure or do they stick out like a drive dock?

A: They stick out a little.

Q: 8. Is there an adapter so I can use it with Thunderbolt 2?

A: Certainly that adapter exists, but it doesnt come with this reader.

Q: 9. Would this tray fit in the SKB 1SKB-R106?

A: Yes, the Atech Flash Technology BLACKJET Rackmount Tray for TX-2DS (1 RU) will fit inside the SKB 10x6 Roto Rack Console.

Q: 10. Can I bring an upstream recording via a Blackmagic Atem Mini Extreme ISO and then access the recording on a downstream Apple Mac Studio that is also connected to this dock?

A: The Atech Flash Technology Blackjet TX-2DS Dual-Bay Thunderbolt 3 Cinema Dock (B&H# ATTX2DS) works as a dual bay product that can accept a variety of memory card readers or drive enclosures to use the actual media (such as the included BLACKJET DX-1M M.2 NVMe SSD Enclosure for TX-4DS Cinema Dock (B&H# BLDX1M)). It connects by Thunderbolt USB C, each module being in one of the product's two bays, and then those work like any typical external drive. The Blackmagic Design ATEM Mini Extreme ISO (B&H# BLATEMMEI) will record to an external drive connected by USB C and thus could be used with the aformentioned ATEM.