Add a high-capacity battery plate to power your Panasonic BGH1 rig with this compact Wooden Camera Micro Battery Slide Panasonic BGH1 Gold Mountfrom Wooden Camera. It supports one Gold mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using the included 3-pin LEMO-type connector cable. With the camera's AG-VBR59 battery in place, hot swapping is supported.

The compact battery slide mounts onto a rig using its integrated 3/8"-16 mounting screw. It also features two 5.8V D-Tap outputs for powering accessories. The D-Tap accessory outputs feature a digital fuse that monitors each D-Tap port and disables it if it exceeds the set current for accessories, leaving the camera running without interruption. Once the load has been reduced by removing accessories, a reset button can be pressed to enable accessory power again.

Supports Gold Mount Battery    Mounts Using 3/8"-16 Screw    Power Camera with 3-Pin LEMO-Type Cable    Can Hot Swap with Camera Battery    Provides 12V Power to Camera    2 x 5.8A D-Tap Accessory Outputs    Protective Digital Accessory Fuse

Panasonic BGH1 camera
Gold mount battery

Related Questions and Answers

Q: 1. Will this also work with FX6?

A: The Wooden Camera Battery Slide Pro Gold Mount for Sony FX9 is exclusively made for the Sony FX9. Please see the FX6 adapter below. Wooden Camera Battery Slide Pro for Sony FX6 (Gold Mount) BH #WO283100

Q: 2. How solid does this mount feel on the camera? Would you trust the single bp mount to hold a 98wh battery on a car mount or similar situation?

A: This is a fairly solid mount and it's tailored to work with the Komodo... will probably be one of the more reliable options.

Q: 3. What voltage is provided to the camera? In a number, please. Not just "the correct voltage".

A: The regulated voltage output of the Wooden Camera Battery Slide Pro for Canon C70 (Gold Mount) is 19.5 volts.

Q: 4. Will this baseplate bring S1H to the right LWS height? Thanks.

A: The Wooden Camera Lightweight 15mm Baseplate (Panasonic BGH1) would only work with the Panasonic BGH1 properly. We recommend a cage like the following for the S1H. Kondor Blue Base Rig with LANC Handle & Baseplate for Panasonic Lumix S1H BH #KOS1HBASERIG https://bhpho.to/3BurCoF

Q: 5. Can you use this with normal size gold mount (for example a Titon 98W) and is there any downside?

A: Yes, you can use the Wooden Camera Micro Battery Slide with normal size Gold mount batteries. There are no downsides.

Q: 6. Is there a (technical) reason this wouldn't work with cameras other than a Pocket 6K Pro if you have the appropriate Dtap cable?

A: The Micro Battery Slide Pro (Blackmagic Pocket Cinema Camera 4K / 6K / 6K G2 / 6K Pro, Gold Mount) comes with a Power cable that would only work with the cameras listed from Black Magic. However if you don't use the power cable is should work with any other camera model if you use the D-Tap connector that is located on most Gold mount Batteries. The Battery slider pro also has 2 D-Tap connectors on the mount. Please note you would need 15mm rods to mount it.

Q: 7. What 3 pin LEMO cables can be used with this?

A: A great solution to consider for 3-pin LEMO cables for use with the Wooden Camera Micro Battery Slide Pro (Micro Gold Mount) is to make custom cable using the power cable customizer from Wooden Camera. See the link below: https://bhpho.to/3NNzPMd

Q: 8. Will this work on the komodo x?

A: The Wooden Camera Micro Battery Plate Adapter (V-Mount to Gold Mount) will work on the Komodo -X.

Q: 9. Compatible cheese plates?

A: A compatible plate for the Wooden Camera Universal Micro Battery Plate (Gold Mount) would be the Wooden Camera Micro Power Accessory Plate, BH #WOP00172.

Q: 10. Can this be adapted to attach on a rail system?

A: The Wooden Camera Battery Slide for C300 Mark III and C500 Mark II (Gold Mount) does not offer adaption to a rail system.