Bullet Train 10K Active Optical HDMI Cable Cleerline SSF 262.5'is built for mission critical environments where stability is key. By delivering data over Cleerline SSF fiber optics alongside copper wire, Bullet Train AOC Cables deliver 48 Gbps and a high-frame rate signal with much lower latency—up to 20% less than a passive copper HDMI cable. These cables are ISF (Imaging Science Foundation) Certified, the name to trust in picture quality and calibration. Tried and tested, and fully CMP/Plenum rated, Bullet Train cables are highly engineered to be a long-lasting part of any audio/video system.

Supports 4K, 5K, 8K and 10K    HDR (High Dynamic Range)    Ethernet    Low Latency

With this new format of HDMI, users are able to reach data rates not seen before. This allows these cables to not only double the highest frame rates seen on HDMI of 60 frames-per-second (fps) to 120 fps, but push it even further allowing some resolutions to push the signal to 240 fps, bringing all of us closer to human vision on screen.

This HDMI cable supports a variable refresh rate (VRR), which becomes extremely important as we push the limit of frames per second. VRR allows the display to match the speed at which frames are traveling through the HDMI cable. This ensures the timing at these extremely minuscule measurements are displayed accurately and efficiently.

Bullet Train cabling comes from a family of HDMI Testing and Display Calibration, which is why Bullet Train can offer Imaging Science Foundation (ISF) certification on every single cable they sell. ISF is a leader in scientifically accurate display coloring. When you run a signal through this HDMI cable, you are seeing the vibrant colors the content was mastered in.

Advancing resolution from 4K to 8K and beyond to 10K pushes the limit of what is capable in screen technology. This HDMI cable can handle signals with many more pixels than previously thought possible. The cable can now account for 44,236,800 pixels on screen at the same time.

Related Questions and Answers

Q: 1. Is this Cable Compatible with Non-Thunderbolt USB C ports(both 10Gbps & 5Gbps) & it's Accessories, or will it act as an Normal USB 2.0?

A: If used with USB-C ports it will have the speed of the port plugged in to.

Q: 2. Can this charge the SmallRig L-Series/NP-F970 USB-C Rechargeable Camera Battery?

A: Yes, the Watson Pro L-Train 6-Bay NP-F Battery Charger would charge multiple SmallRig L-Series/NP-F970 USB-C Rechargeable Camera Batteries. Furthermore, the Smallrig battery can be charged via USB-C. ANKER 735 Nano II 3-Port USB 65W GaN II Charger BH #ANA2667J111

Q: 3. Other than having velcro, how is using this different than using a standard white vinyl backdrop?

A: This particular product is to add an additional portion for a subject to be placed on when using the Lastolite HiLite. A vinyl background like the Savage Infinity Vinyl Background (8 x 20', White) B&H # SABGIV820W, would come pre-rolled onto a cardboard core and can be used with any background support more easily.

Q: 4. What’s the difference between 2A & 1.2A?

A: The Watson Pro L-Train 6-Bay NP-F Battery Charger has two different amp settings for charging, 2A and 1.2A. At 2A a battery is charged in about half the time as at 1.2A.

Q: 5. Can you plug xlr directly from microphone to input to distribute?

A: No , This unit requires a line level input. You must send off a line output on a mixer. outputs to press are mic level.

Q: 6. Does it fit 1/4 XLR cord?

A: This will only accept XLR cables. Not 1/4" cables.

Q: 7. Can I connect my pioneer dj900 nexus mixer and Yamaha O1V mixer on 2 RDL-10 K, before entering the audio processorOr should I use the RDL-600? Better!?

A: We usually use these for summing stereo signals to mono. Very handy!The STD-10K is designed for combining or distributing consumer level audio signals, which often use RCA connectors (like DVD players, CD players, etc). The STD-600 is designed with the proper resistance for professional audio equipment, which typically uses XLR or TRS connectors.That DJ mixer has both types of outputs, but using the XLR outputs to match what the Yamaha is outputting is your best bet. Then they'll both be a good match for an STD-600. The device the signal is going to should also have a professional type input.I think the RDL product sheet has some example diagrams for dealing with a variety of balanced and unbalanced connections.

Q: 8. Can this charger power the BMCC6KFF through its 12V DC power in connector and draw power from 6 loaded fully charged batteries?

A: The Watson Pro L-Train 6-Bay NP-F Battery Charger's DC outputs do not draw power from the connected batteries, instead they would only output power when the charger is connected to an wall outlet. With the proper cable, the Watson Pro L-Train 6-Bay NP-F Battery Charger could be used to power the Blackmagic Design Cinema Camera 6K (Leica L) so long as the charger is connected to an power outlet.

Q: 9. I heard from someone that this background is opaque. I also read on your site that there is no need to relight the background, leading me to believe that the lighting from behind it will light it evenly and sufficiently. Please shed light on this contradiction...?

A: The HiLite Bottletop Cover is a cover that fits over the Hilite and is not translucent. Lastolites site recommends to not light it from behind so front lighting will be needed.

Q: 10. If I'm using it for video, and have an led main and hair light;1. Is it possible to get enough light from led lights inside the background? 2. Wouldn't there be a spill issue?

A: To use the green screen most effectively, it would need to be lit independently from the subject.