This 3.3' Bullet Train 10K HDMI Cable 48Gb/s 3.3ftfrom Bullet Train 10K HDMI Cable 48Gb/s 3.3ftis built for mission-critical environments where stability is key. By supporting 48 Gb/s data rates, this cable ensures impeccable picture quality, with zero latency, no matter the signal. This cable is ISF (Imaging Science Foundation) certified for color accuracy, which is a trusted name in picture quality and calibration.

Supports Up to 10K Resolution    Up to 48 Gb/s Transfer Rates    Up to 120 fps/Hz    Dolby Vision & HDR Support

Supports resolutions from 4K to 10K
Supports up to 120 fps/Hz
Dolby Vision and HDR support
7.1 audio, Dolby Audio, and DTS Audio support
HDCP 2.3 compliant

Related Questions and Answers

Q: 1. Does the Lastolite 5x7 white vinyl train have velcro on both the short side and long side?

A: the velcro is only on the short side

Q: 2. Can you plug xlr directly from microphone to input to distribute?

A: No , This unit requires a line level input. You must send off a line output on a mixer. outputs to press are mic level.

Q: 3. Do I need to plug this in for it to work?

A: The PSC Press Train is a passive box which requires no power to operate.

Q: 4. What is the total power draw in watts with all 6 bays charging at 2 amps?

A: The total power draw of the Watson Pro L-Train 6-Bay NP-F Battery Charger would be about 60W with all batteries charging at full speed.

Q: 5. Will these Mac kits work in a PC desktop with the same number of pins?

A: As these chips contain specific features for Apple compatibility, such as Apple Specified Thermal Sensor. This may or may not prevent the chip from working in a PC.

Q: 6. Does the vinyl train also fit the 7x8 Hi-liter?

A: Yes. The following unit will accommodate both 7x8 and 6x7 models.

Q: 7. Are there adapter for this charger to charge LP-E6 batteries?

A: No, the Watson Pro L-Train 6-Bay NP-F Battery Charger has fixed charging plates, unlike the single-battery adaptable plate chargers from Watson, and cannot be changed to charge the Canon LP-E6.

Q: 8. If I'm using it for video, and have an led main and hair light;1. Is it possible to get enough light from led lights inside the background? 2. Wouldn't there be a spill issue?

A: To use the green screen most effectively, it would need to be lit independently from the subject.

Q: 9. Can this charger power the BMCC6KFF through its 12V DC power in connector and draw power from 6 loaded fully charged batteries?

A: The Watson Pro L-Train 6-Bay NP-F Battery Charger's DC outputs do not draw power from the connected batteries, instead they would only output power when the charger is connected to an wall outlet. With the proper cable, the Watson Pro L-Train 6-Bay NP-F Battery Charger could be used to power the Blackmagic Design Cinema Camera 6K (Leica L) so long as the charger is connected to an power outlet.

Q: 10. Can this be used on an imac 5K 2016?

A: Sorry, no. This memory is for the 2013 Mac Pro.