Use this Camvate Power Cable with Locking Right-Angle Connector for Atomos/SmallHD 702 monitor or other device that has a 2.5mm locking power connector. The coiled cable allows you the excess cable length to stay neat and out of the way when not needed. Each cable is tested for continuity before shipping.

Right-Angle Power Connectors    One Locking and One Standard Connector    Coiled Cable    Pre-Tested Cable

Related Questions and Answers

Q: 1. Why won't it work directly with the Shogun Inferno 7" which has a DC 6-16v port already, why is the eliminator needed also?

A: The Atomos Shogun should have shipped with a Atomos Battery eliminator to work with the Camvate D-TAP cable, and the Shogun Inferno. The cable connects to the Battery eliminator. Atomos AtomX Sony L-Series Type Battery Eliminator BH #ATOMDCA001

Q: 2. How long is the straight section of the miniHDMI connector before it angles? Wonder if it might work with a SHAPE cage on the a7s ii.

A: Hello umon K, its a little bit under 1 just about 9/16 of an inch.

Q: 3. Is this compatible with Z Cam E2 S6?

A: This cable is not compatible. You will need a male 2-pin LEMO cable. Here is an example of one compatible cable: https://www.bhphotovideo.com/c/product/1592220-REG/kondor_blue_kb_dtap_lemo2p_d_tap_to_lemo_2_pin.html

Q: 4. Right angle hdmi

A: The right angle is Micro HDMI

Q: 5. Will this cable support 4K @ 60Hz?

A: Yes. This cable will support 4K, 60 Hz.

Q: 6. Will it work with a SmallHD Focus 5' monitor?

A: As long as it has an HDMI input then yes.

Q: 7. Hi. Is the "micro side" Lshape of the cable long enought to reach all the way through a smallrig hdmi clamp mounted on a cage? Is there a non L shaped version?

A: You might want to go with a standard micro HDMI to HDMI. We have a variety of micro HDMI to HDMI that should work for you.

Q: 8. Does this work with Atomos Shogun Inferno 7"?

A: No, The Camvate cable will not work. Typically you would use Atomos's Battery eliminator with the following cable. Battery eliminator BH #ATOMDCA001 https://bhpho.to/3BBRqRg Cable - BH #KODCTAP21LCK https://bhpho.to/3DjNju5

Q: 9. can i plug this dtap into this splitter? B&H #CAC2617 ' MFR #C2617 and than the splitter into this BH #WO280300 MFR #280300 ?

A: The CAMVATE Straight D-Tap to Locking DC 2.5mm Right-Angle Cable (Black, 18.9") (B&H# CAC2637) can be plugged into the CAMVATE Male D-Tap to 3-Port Female D-Tap Splitter Hub (Red) (B&H# CAC2617), which can subsequently be plugged into the Wooden Camera Battery Slide for RED KOMODO Camera (V-Mount) (B&H# WO280300).

Q: 10. Will this work with a movcam cage on A7s? Some plugs are too thick to fit.

A: Atomos is aware that these cables are often used with cages that have very little clearance for jacks. The connector on the micro side couldn't be much smaller and have proper insulation. We believe this will fit the a7s movcam slot. Without a physical test, there cannot be 100% certainty. You do have our 30 day return policy.