The CAMVATE DC 2.5mm to 4-Pin Male Right-Angle Power Cable 12.6"lets you securely connect your compatible field recorder to a DC power supply for uninterrupted operation on location. This 12.6" coiled cable features high-quality construction and right-angle connectors—a DC 2.5mm barrel on one end and a Hirose 4-pin male plug on the other, allowing use with Sound Devices 688, 644, and 788T models, and Zoom F4 and F8n units. The cable is tested for continuity to ensure reliability out of the package.

Connects Field Recorder to DC Power    For Sound Devices 688, 644, and 788T    For Zoom F4 and F8n    High-Quality Construction    Continuity Tested    DC 2.5mm Barrel Connector    Hirose 4-Pin Male Plug    Right-Angle Connectors    Coiled Cable

Related Questions and Answers

Q: 1. Is this compatible with MixPre-10 II?

A: Yes, it is compatible for use with the MixPre-10 II.

Q: 2. I need to power a BH#LESMV19Q, using BH#LEBESM with my Sound Devices 833 SL-2 DC Hirose 4-pin output. Would this cable work?

A: No, the CAMVATE C2725 DC 2.5mm to 4-Pin Male Right-Angle Power Cable for Sound Devices and Zoom Field Recorders is not compatible for use with the Lectrosonics SMBATELIM Battery Eliminator for SM Transmitters (B&H # LEBESM), which requires a locking DC barrel connector. Instead, you can use the Deity Microphones SPD-HR25 4-Pin Hirose to 2.5mm Locking DC Barrel Jack Cable (B&H # DESPDHR25).

Q: 3. chances of destroying this BH #BLVIDA125HRD MFR #HYPERD/AVIDA12/5HDR with that cable? or better to use regulated 12v to dtap? hm

A: The CAMVATE Straight D-Tap to Locking DC 2.5mm Right-Angle Cable (Black, 18.9") is fine to use with the Blackmagic Design Video Assist 5" 12G-SDI/HDMI HDR Recording Monitor and the chances are low.

Q: 4. What's the inner diameter (ID) of this barrel connector?

A: The Tilta 12V USB-C to 3.5mm DC Male Power Cable (Right-Angle, 15.7") offers a 1.35mm x 3.5mm barrel connector.

Q: 5. Does this cord work with rode video mic pro+? I lost mine.

A: If connecting your Video Mic Pro+ to a camera you need this: https://www.bhphotovideo.com/c/product/1409621-REG/rode_sc2_3_5mm_trs_patch_cable.html?sts=pi-ps&pim=Y If using with a smartphone then it's this: https://www.bhphotovideo.com/c/product/1048152-REG/rode_sc7_trrs_iphone_cable_for.html

Q: 6. Will the locking cable work on my Freeworld LUT5 field monitor?

A: No, the CAMVATE Straight D-Tap to Locking DC 2.5mm Right-Angle Cable will not support the Feelworld LUT5. We suggest working with a dummy battery cable like the following Kondor and Andycine models. Kondor Blue D-Tap To Sony L Series Dummy Battery NPF Cable BH #KODTAPSLBK ANDYCINE Sony F970 to D-Tap Dummy Battery BH #ANADTAPF970

Q: 7. Can I attach this end on to the Sennheiser DC 2 BH #SEDC2 to be plugged into the BH #BECOCO15VA to be powered off a v-mount battery?

A: This connector can be soldered on to the bare wire end of the cable on the Sennheiser DC 2 and the be connected to the Bebob Factory GmbH COCO-15V III V-Mount Battery Plate.

Q: 8. Does it work to power smallhd indie 7?

A: No, The Camvate cable will not support SmallHD displays. We recommend using the following Dtap Dummy battery solution from SmallHD for powering the display from Dtap. SmallHD D-Tap to L-Series Dummy Battery Cable (32") BH #SMDTSLFB https://bhpho.to/2JgCYDv Or BH #KODTAPSL https://bhpho.to/3dWwjjD

Q: 9. What is the cable exit diameter?

A: The manufacturer does not specify the exit diameter.

Q: 10. Work with rode videomicro to camera or phone?

A: No, the SC10 cable is not compatible with the VideoMicro which has a standard 3.5mm TRS output. The SC10 will work with the VideoMic NTG. For the VideoMicro, you can use the Rode SC7 (B&H # ROSC7) which has a standard 3.5mm TRS connector on one side and connects to the mic's output and a 3.5mm TRRS connector on the other side to connect to a smartphone. The cable that comes with the VideoMicro is the SC2 (B&H # ROSC2) and it has standard 3.5mm TRS connectors on both ends, This is the cable to use for connecting the VideoMicro to cameras and recorders.