As the company's premium line of instrument cable for acoustic guitar, the 12' Monster Prolink Acoustic 1/4" Male Cable 12'incorporates carefully designed construction to offer accurate imaging and rich, natural sound for discerning players and tone aficionados. It boasts custom Monster 1/4" TS connectors (one right-angle and one straight) with 24kt gold contacts, and it features Time Correct multigauge wire networks protected by MicroFiber, PEX, and carbon-infused dielectrics. Additionally, there is 95% copper braided shielding, collet strain relief, and a Duraflex jacket. The result is a top-shelf cable that yields minimal handling noise and magnetic interference while maintaining proper high-frequency performance and harmonics, to improve the tone of your instrument.

Premium Cable for Acoustic Guitar    Custom Monster 1/4" TS Male Connectors    24kt Gold Contacts    Minimal Handling Noise    Accurate Imaging and Warm, Rich Sound    Time Correct Multi-Gauge Wire Networks    Collet Strain Relief    Carbon-Infused Polymer Covering    95% Copper Braided Shielding    Lifetime Cable Warranty

Monster Acoustic pro audio cables' advanced design yields rich, accurate reproduction without frequency and phase distortion.

Multiple gauge high- and low-frequency wire networks offer accurate imaging and a tone that's warm, rich, and natural.

A dense shield rejects interference and hum, and heavy-duty 24kt gold connectors increase conductivity and resist corrosion.

Monster set the standard with the Original Lifetime Cable Warranty. Your Monster Acoustic pro audio instrument cable is covered by their 100% replacement guarantee, so you'll be a Monster for life.

• Multiple gauge high- and low-frequency wire networks for accurate imaging and warm, natural sound
• Time Correct windings for precise sound reproduction
• Custom Monster connectors with 24kt gold contacts and red housings
• Durable connector design featuring collet strain relief
• Duraflex protective jacket
• Carbon-infused polymer covering minimizes handling noise
• Solid-core center conductor
• 95% copper braided shield minimizes interference and hum
• MicroFiber dielectric provides isolation of magnetic fields
• Lifetime cable warranty

Related Questions and Answers

Q: 1. Will this work the Synco D2 shotgun microphone (needs phantom) plugged into a passive Beachtek audio adapter?

A: No, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable will not work with the Synco Mic-D2 Hypercardioid Shotgun Microphone because it has a male XLR connector and the mic requires a female XLR connector. The V-Link Adapter Cable is intended for use with a microphone that has a 3.5mm output and requires plug-in power, but needs to connect to an XLR input. This cable does not allow phantom power to pass through to the microphone. It has a built-in phantom power converter that converts phantom power to 3 to 5V of plug-in power. The Mic-D2 needs to connect to an XLR mic input that can supply 48V of phantom power for the mic to operate.

Q: 2. How fast can you drive with either a Gopro or an Iphone 14 pro mounted on your car?

A: The 3 Footed Monster Magnetic Mount (Pro) does not have a vehicle speed it's rated or verified to securely hold. Since the mount is magnetic, the speed at which it can be used securely will vary depending on several factors about the vehicle, such as the materials and thickness of the vehicle's construction.

Q: 3. Can the ballhead be removed fro the base on this for direct mounting of an action camera to the base?

A: The ball head on the 3 Footed Monster Magnetic Mount (Pro) can be removed, but it connects using a 3/8" screw for mounting heads, not a 1/4" screw for cameras.

Q: 4. Can it test an audio cable with 1/4 on one end and 1/8th on the other?

A: You can use the included testing probes to test each connection separately.

Q: 5. Are these shielded cables?

A: Yes, the PTZOptics 8-Pin Male to Male Cascade Cable are shielded cables.

Q: 6. Does it work with Rode Wireless Go II?

A: The V-Link adapter should work to connect the output from the Wireless GO II receiver to an XLR mic input. This adapter does have a built-in phantom power converter which would not be of use with the transmitter, but if used as a standard 3.5mm TRS to XLR male cable, it should function properly. As another option, you could use the Cable Techniques 18" 3.5mm R/A Low-Profile XLR-3M Male for RODE Wireless Go Output to Field Mixer and Recorder (B&H # CACTGOX3M18) which does not have the phantom power converter.

Q: 7. Second question: Will this also work with the Synco D2 when plugged into the new Beachtek-Max Active Audio Adapter DSLR?

A: No, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable will not work with the Synco Mic-D2 Hypercardioid Shotgun Microphone because it has a male XLR connector and the mic requires a female XLR connector. The V-Link Adapter Cable is intended for use with a microphone that has a 3.5mm output and requires plug-in power, but needs to connect to an XLR input. This cable does not allow phantom power to pass through to the microphone. It has a built-in phantom power converter that converts phantom power to 3 to 5V of plug-in power. The Mic-D2 needs to connect to an XLR mic input that can supply 48V of phantom power for the mic to operate.

Q: 8. Can the ball head be removed from the Basic 3 footed monster base?

A: The ball head on the 3 Footed Monster Magnetic Mount (Basic) is not designed to be removed.

Q: 9. is there a way to test USB3 reliably or if not is there a model w usb3?

A: This cable tester can be used for USB 3 cables which are type-A to type-B. It will only test the cables ability to send signal from A-B, not data rates or speeds.

Q: 10. What is the length of the attached power cord?

A: The Monster Cable Pro MI 8-Outlet Surge Protector with USB comes with a 15 foot power cord attached.