Aas Insomnia Sound Pack For Lounge Lizard Ep-4

Product Code: eq90551
Availability: In Stock

$117.00 $180.18

Qty

19 reviews Write a review

Description
Reviews (19)

AAS Insomnia Sound Pack for Lounge Lizard EP-4is a sound pack for their Lounge Lizard platform, progragmmed by sound designer Daniel Stawczyk. This collection of 128 presets expands upon the palette of the original electric piano to give you eclectic synths, growling organs, lush pads, sparkling bells, deep basses, crazy leads, and more. This preset collection can be played with the AAS Player plug-in, or edited, tweaked, and customized within Lounge Lizard 2 synthesizer (available separately). The software runs on Mac and Windows computers and is compatible with virtually every DAW. It can be used as a standalone or as a plug-in with VST, VST3, RTAS, and AAX Native support for Mac and Windows, and with additional AU support for Mac OS X. It is also NKS-ready.

Expands on Lounge Lizard Electric Keys Adds Synths, Organs, Basses, and More 128 Presets

General
Delivery Method	Download
License Type	Standard
Sound Type	Piano/Keyboard, Synthesizer
Supported Plug-In Formats	AAX (Native), AU, NKS, RTAS, VST2, VST3
Standalone Operation	No
System Requirements
OS Compatibility	macOS 10.11 or Later Windows 7 or Later
CPU Requirement	Mac: Intel Core i5 and Faster or Apple M1 and Faster Windows: Intel Core i5 and Faster
Software Requirement	64-Bit DAW
Internet Connection Required	Yes

Cool One
Glorious Pose
Laurens's Job
Hidden Tattoo
Jamming Flanger
Just Bassy
Less Funky
Real Truth
Slam Distorted
Starling Me
Strung Hope
Synth Fingers
Thrilled Staging
Tube Pick
Undisturbed Gist
Vatican City
Widened Chorus

Alu Cans
Chrome Pressure
Dawn Justice
Glass Blessing
Into Woods
Nemo Vision
Stiff String
Syberian Viral
Xylo Vision
Water Balloons
Funk 'n' Bell
Ground 'n' Bottles
Horn 'n' Bliss
Jimmy 'n' Nails
Middle 'n' Range
Trombone 'n' Flowery

Armstrong's One
Brasslette's Go
Decaying Brass
Deeper Disto
Distant Sorrow
Layered Infantry
Smile Trombone
Optimal Uniform
Synthesis Mode

Belly Player
Distorted Guts
Filthy Realms
Gothic Volume
Guardian Angel
Herb All
Hollistic
Hurting More
Dynamic Sadness
Leading Device
Let Us
Phasing Synth
Phat Lead
Signing Wish
Simple Flange
Sine Me
Synths Story
Techno Slot
Triumph Legend 1
Triumph Legend 2
Voltage Control

Blind Nemo
Cabin Version
Doors Almost
Easy One
Literal Vision
Specific Approach
Warm Blanket

Aggressive Greenery
Brass Pad
Desolate Glass
Gentle Tale
Hush Keys
Instant Paddy
Lemon Pulp
Missing All
One Feedback
Raw Synth
Semi Keyed
Vivid Hammers

Chordy Whim
Crying Drones
Freddy's Choir
Pearls' Swine
Wooden Entrance

Color Hoarse
Correct Synthesis
Darker Strings
Delayed Hope
Diamond Tears
Gas Leak
Jupiter's Orbit
Just Yellow
Marshmallows
Meat Shaker
Midnight Meeting
Piano Voltage
Played Keys
Prophet's Right
Pumped Dreams
Rapid Quack
Release Jumper
Resolution
Scare Us
Self Offence
Semi Finals
Some Others
Stingy Will
Strange Abyss
Twirl Home
Tough Decision
Triangular Levitation
Volatile Tribe
Venetian Release
Vibra Trombone
Vintage Truth
Xello Phobia
Synth 'n' Picky
Unsure 'n' Pearly 1
Unsure 'n' Pearly 2

Disto Needle
Inside Glow
Key Work
Paddy's Home
Medium Range
Traveler's Joy

Related Questions and Answers

Q: 1. Will the Bescor Nikon EH5 AC Adapter work with the Nikon EP-5B?

A: Yes, the Bescor EH5 AC Adapter for Nikon is compatible with the Nikon EP-5B.

Q: 2. How many absorbers are in the box, we need absorbers for a 6 panel arcrylic drum shield ?

A: The unit you have linked includes (1) S2 Sorber baffle. The complete set requires (7) S2 Sorber baffles and other parts. Here is a link to the product page for the full kit; You can find all of the parts listed in the "In The Box" list on your right-hand side of the Overview Tab. https://www.bhphotovideo.com/c/product/401085-REG/ClearSonic_ISOPAC_A_IsoPac_A_Isolation_Package.html

Q: 3. Will this work with the Z6 III?

A: Yes, the Nikon EP-5B Power Supply Connector for Select Nikon Cameras is compatible with the Nikon Z6III camera, but you will also need the Nikon EH-5d AC Adapter (https://bhpho.to/2PZrCFd).

Q: 4. Will this power the D850 with the MB-D18 battery grip (and if it does, will it shoot at a full 9fps)?

A: The power supply is meant to be used with the camera without the grip, so only 7 FPS.

Q: 5. I had 2 other solutions somehow lose power (the battery symbol blinks) after a few days. Will this one maintain for days?

A: The Nikon EP-5B Power Supply Connector for Select Nikon Cameras (B&H# NIEP5B) can produce the same amount of power even when used for long periods. However, higher temperatures could cause an increase in impedance and therefore a slight reduction in voltage output from the MOSFETs in the power source used -- presumably an AC to DC transformer. As such, we'd recommend making sure to allow that transformer's heat to escape during use rather than, say, covering it with anything that might insulate it, leaving it in the sun, or otherwise preventing it from touching surfaces that have the potential to wick heat away from it such as a cool floor. Since something similar can happen to your camera (which has the potential to cause or contribute to this problem, too, even if no overheating is sensed nor warned about), you may also wish to leave the battery door of your camera open, the rear screen pulled or at least tilted away from the body of the camera, and your camera mounted to something that can serve as a heat sink such as an L-bracket, cage, or tripod. Shading the camera from direct sunlight is also helpful. This product may be mounted in the hot shoe and used for that purpose even in slightly windy conditions: Glide Gear Adjustable Hood Camera Lens Shade with 11" Friction Arm (B&H# GLLS100) https://bhpho.to/3t1BhCV

Q: 6. Which power supply should I use with the EP-5B power supply connector?

A: To use the Nikon EP-5B Power Supply Connector for Select Nikon Cameras, the Nikon EH-5d AC Adapter, B&H # NIEH5D, is required.

Q: 7. Is this eyepiece compatible with the Canon R5?

A: The Think Tank Photo EP-R3 Hydrophobia Eyepiece for Canon R3 is not compatible with the Canon R5.

Q: 8. Is this eyepiece compatible with the Canon R5 Mk ii?

A: Unfortunately, the Think Tank Photo EP-R3 Hydrophobia Eyepiece for Canon R3 is not compatible with the Canon R5 Mark II.

Q: 9. Longshot question: would these fit the capsule of an sm58?

A: I don't believe these would fit or stay on that microphone. You can contact our Pro Audio department. They may have a suggestion for something that will work.

Q: 10. Is this compatible with the Canon R5 Mk ii?

A: Unfortunately, the Think Tank Photo EP-R3 Hydrophobia Eyepiece for Canon R3 is not compatible with the Canon R5 Mark II.

Edwin	01/09/2024
[Standard] I finally found a no fuss option to hide lavalier mics. They haven't dropped out yet either. 5

anyonymous	29/08/2024
[Standard] Delivery was super fast and the pedals work exactly as described. Would definitely order from B&H again. 5

Scott	28/08/2024
[64-Bit DAW] It is rubbery and flexible for fitting the mic in the slot in the back, fits my Tascam mic without issues and lets me even tape a wind protection strip over it. 5

Edwin	25/08/2024
[Standard] It fits perfectly with my ME2 lavalier and has not fallen out so far. Audio quality has been quite clear. 5

Amateur Photog	12/08/2024
[64-Bit DAW] My children took the ear tips off all my earbuds. This is a great price for how many come in a package. 5

Scott Dibble	11/08/2024
[64-Bit DAW] I bought this to replace another expression pedal that I was disappointed with because it felt very delicate, lightweight and a limited envelope on volume swells. It's more for home use. Also, the trs cable was very short making set up more difficult than necessary.. Anyway, the Moog EP-3 has a solid, durable construction and the trs cable has plenty of length. The pedal has a smooth glide to it as well. I have one for home and live set ups. 5

Clint	04/08/2024
[Download] Helps an average mic perform better. 5

beav6	02/08/2024
[Standard] These are for the small in-the-ear size ear pieces. I can use these but meant to order the on-the-ear size. Earbuds is the operative word that I missed. They look fine and seem pretty durable. 5

Peter	26/06/2024
[Standard] I purchased this automatically based on my experience with the E-M1 series (original, mark 2, & mark 3) on which it was not unusual to accidentally knock off the eyepiece and sometimes lose it. So I always kept a spare on hand. I ordered this eyepiece for the OM-1 without having actually yet received my OM-1. Once I did get the new camera, I saw that the design was much improved such that it won't get knocked off nearly as easily. So it turns out I really didn't need it after all. The price was insignificant enough so I kept it anyway. 5

Richard	24/06/2024
[Standard] I like to keep a few of these on hand as spares, because they do eventually wear out, or sometimes pop off and become lost. There is a bit of technique involved with putting them on, but after you have done it a time or two, it is no problem, and it is a very occasional thing, anyway. 5