Camvate Crab Clamp With Magic Arm (Upgraded Locking Lever)

Camvate Crab Clamp With Magic Arm (upgraded Locking Lever)

Product Code: eq90765
Availability: In Stock

$80.40 $117.38

Qty

8 reviews Write a review

Description
Reviews (8)

Featuring an upgraded central locking lever that enables the arm to support 7.7 lb, the CAMVATE Crab Clamp with Magic Arm (Upgraded Locking Lever)has a total length of over 11". Use the clamp and arm combination to position and support a variety of devices, from small lights and monitors to flags and cameras.

The magic arm features two 1/4"-20 threaded screws at either end, while the clamp incorporates one 3/8"-16 threaded hole, making it well suited for use with a wide variety of accessories and gear. The crab clamp has a minimum opening diameter of 10mm and a maximum diameter of 2.1" to clamp onto a variety of surfaces.

Position Mic or Camera Precisely Articulating Magic Arm Super Clamp Easy to Install, Adjust & Remove Aluminum & Stainless Steel Construction

Parameters
Load Capacity	7.72 lb / 3.5 kg
Top Mount	1/4"-20 Male
Bottom Mount	Jaw Clamp
Jaw Opening	2.1" / 54 mm
Points of Articulation	3
Maximum Length	11.4" / 290 mm
Weight	12.6 oz / 356.7 g
Packaging Info
Package Weight	0.81 lb
Box Dimensions (LxWxH)	8.65 x 3.5 x 1.6"

Related Questions and Answers

Q: 1. Will this work with MIOPS splash kit?

A: Yes, The Pluto Magic Arm with Clamp will work with Miops splash kit.

Q: 2. Can the cold shoe attachment be replaced by a 1/4 20 male thread?

A: As illustrated by photo #4 from the top of the product images, the cold shoe may be removed, but there is a little 1/4 20" stud on that end, not a threaded hole.

Q: 3. Could this hold a DSLR (Canon M50 Mk ii) at a 90 degree angle?

A: The SmallRig 2164 Multifunctional Crab Clamp with 3.5" Ball Head Arm has a maximum payload of 2.2 lb / 1 kg. The Canon EOS M50 Mark II Mirrorless Digital Camera with 15-45mm weighs 1.1398 lb / 517 g. You will be good for stationary positioning even at 90°.

Q: 4. Its not clear to me from the photos and discription can you have threads on both ends. I would not use a hot shoe to mount anything. 3/8 on one end to 1/4 20 on the other is perfect?

A: The iFootage LT2-3.5 Spider Crab Magic Arm (5.5") provides a 1/4"-20 male screw on one end and a 1/4"-20 female thread under the male shoe on the other end.

Q: 5. Is there a baby pin adapter for these Crab arms?

A: Unfortunately iFootage does not have a crab arm that fits onto a baby pin.

Q: 6. Does the red knurled nut screw down to hold the plate in place in the shoe?

A: Yes, the iFootage MA-CSA Cold Shoe Adapter for Spider Crab Magic Arm's red knurled nut screws down to hold the plate in place in the shoe.

Q: 7. I bought this piece already, considering getting another arm, will 2 arms sit next to each other without problems? Seem like they would

A: Otherwise, having two of these arms next to each other should be fine.

Q: 8. can the 11 inch version be mounted without a shoe adapter on to a 3/8 or 1/4 screw ?

A: Yes, the shoe mount can be unscrewed allowing you to use the screw on the iFootage MA5-6 Spider Crab Magic Arm with QR Mounting (11").

Q: 9. What is the outside diameter of the two Articulating Arms?

A: iFootage LT4-5.5 Spider Crab Magic Arm (9.5") arm section has a diameter of 13mm. The base mount dimension with the 1/4-20 screw is 29 x38mm.

Q: 10. Are the pins retractable or spring-loaded?

A: The iFootage MA3-4 Spider Crab Magic Arm with QR Mounting (7") has spring-loaded ARRI Anti-Twist pins.

Albert	29/09/2024
[0.81 lb] This clamp works as expected. It's easy to use and holds tightly to whatever you need to clamp it to. All off the clamping force (except the large claw) seems to come from the lever in the middle of the arm. So tightening it tightens the other two joints as well. That makes it quick to use, but it does take a little trial and error to get your camera exactly where you want it. 5

Baz,	19/07/2024
[Jaw Clamp ] Very versatile and can be configured in so many different ways and positions. I use it to hold a YoloLiv streaming device while filming sports. I would normally position the Yolo on the camera hot shoe however, that position is taken with a wireless mic system. Very well constructed using quality materials. 5

Terence	22/06/2024
[Jaw Clamp ] I needed something to hold my video camera while offroading in Utah in a rented Jeep. It had to be something substantial without leaving any permanent sign of having been there. The crab clamp gripped the passenger side dashboard grab bar firmly while the magic arm held the camera above the dash without shaking while moving down the trail. The result? Some fantastic videos that I will cherish for years to come. 5

Nima	06/06/2024
[3] Articulating arms wildly vary in price and I'm sure the more expensive ones are better built and to higher standards with better materials but for my needs this is perfect. I bought this as a just in case item. As in just in case I need it for something. It satisfies my needs and is more than worth it's price. 5

Scott	11/05/2024
[0.81 lb] Absolutely nothing wrong with my experience! The gentleman on the phone knew exactly what I was looking for. I thought I was transported back to the 1970’s when service really meant something. B&H will be my go to store for all my high end electronics. 5

Jeshurun	04/05/2024
[3] I really like using this clamp arm. I use it to secure a field monitor to my camera stand for church services. We rent so I needed something sturdy but quick and easy to manipulate. I don't think I was ever in a situation where it wasn't able to do what I wanted it to. The build quality is excellent, and the single knob that locks the whole arm in place very securely is so convenient. I would fully recommend this arm. 5