The Godox TX3-XLR Wireless Transmitter 514-596 MHzis a plug-on wireless transmitter compatible with the WMicS1 wireless system. The lightweight design is comfortable for the talent to hold and can accommodate any handheld or shotgun XLR microphone (available separately). The transmitter can provide 48V phantom power for condenser mics and offers reliable transmission at a range up to 197' line-of-sight.

The TX3-XLR operates on two AA batteries and is equipped with an On/Off switch that doubles as a mute button. An easy-to-read backlit OLED screen with adjustable brightness shows the transmitter's frequency, channel/group, input level, muting, and battery life.

The system offers 96 manually selectable frequencies to choose from in order to create an interference-free transmission channel for wireless transmission to the RX1 receiver (available separately). The transmitter has two levels of RF transmission power: The high 50mW setting improves signal quality when working at greater distances, while the low 20mW setting offers maximum battery life when working at close range.

For WMicS1 Wireless Systems    Use with XLR Handheld or Shotgun Mic    For Interviews & Wireless Boom Work    XLR Connector with 48V Phantom    96 User-Selectable Frequencies    20/50mW Switchable Transmission Power    Easy-to-Read OLED Screen    Rugged Metal Housing    Powered by Two AA Batteries    197' Line-of-Site Range

Related Questions and Answers

Q: 1. Will this work with a Sony receiver in the 566 MHz range?

A: The Saramonic TX-XLR9 Wireless Plug-On Transmitter (514 to 596 MHz) is not compatible with Sony Receivers. Sony receivers are only compatible with Sony transmitters.

Q: 2. Would it be possible to in any manner whatsoever to use the SLXD3 with the ULXD or QLXD wireless systems from Shure?

A: The Shure SLXD3 Digital Plug-On XLR Transmitter is unfortunately not compatible with ULXD or QLXD systems. ULXD and QLXD systems do have (limited) cross-compatibility, but SLXD systems are only compatible with SLXD components.

Q: 3. Will it peak if I plug a common condenser mic with +48v? I read the review said there is no input level adjustment so I am hesitating to get this or not to pair up with my existing saramonic a system. Thanks

A: I have used this transmitter with over a dozen microphones, dynamic and condenser, and I have not had the input overload the transmitter. In fact, our team commonly use it with condenser shotguns for commercial shoots with great results and we've even used it with a large diaphragm studio condenser mic with no issues. I think if you purchase it, you will be very happy with the sound results and the flexibility it adds. Plus, if you buy it from B&H and you don't like it, you can always return it for a full refund.

Q: 4. Can I use Sennheiser ME 4 cardioid lav mics? This kit seems almost perfect for my needs, with the exception that I need cardioid mics.

A: Yes, the Sennheiser ME 4 Cardioid Lavalier Microphone can be used with the Saramonic UwMic9 2-Person Camera-Mount Wireless Omni Lavalier Mic System.

Q: 5. Can we use this with sennheiser G3/G4 receivers ?

A: The Shure SLXD3 Digital Plug-On XLR Transmitter (H55: 514 to 558 MHz), BH # SHSLXD3H55, is not compatible with Sennheiser receivers. Consider: Sennheiser SKP 100 G4 Plug-On Transmitter for Dynamic Microphones A: (516 to 558 MHz), B&H # SESKP100G4A: Key Features: 1680 Tunable Frequencies Across 42 MHz Pilot Tone Squelch 20 Banks with 12 Channel Presets Each Compander for Clearer Sound Auto-Lock Prevents Accidental Adjustment Plugs-On to Your Handheld Dynamic Mic Use with G4 Series Wireless Receivers

Q: 6. Can it work with UWMIC9S receiver

A: No, the new Saramonic UwMic9S components are not backwards compatible with the older UwMic9 series components like the Saramonic TX-XLR9 Wireless Plug-On Transmitter.

Q: 7. How do I output two separate channels on this receiver? I see it only includes one 1/8" TRS to XLR cable.

A: The UwMic9-RX9 Dual Channel Camera Mount Receiver outputs a stereo signal which has both channels in one TRS 3.5mm cable. You can also use a stereo 3.5mm to dual XLR cable like B&H # HOHMX003Y or an equivalent 'Y' interconnect.

Q: 8. Would this work with the Shure MX412D?

A: Yes, the Shure SLXD3 Digital Plug-On XLR Transmitter is compatible with the Shure MX412D.

Q: 9. The frequency of Sony microphones is 548 - 607 MHZ. Can I use this system?

A: Although on a similar set of frequencies, the Godox TX3-XLR Plug-On Wireless Transmitter would not be compatible with Sony wireless microphone system components. Unless specified compatible, most wireless products use their own proprietary communication protocols and are not cross-compatible with other brands making similar products on similar frequency ranges. The Godox TX3-XLR Plug-On Wireless Transmitter is specified for use with the Godox WMicS1 Wireless Systems.

Q: 10. What is the locking system for the lav mics? (Godox Proprietary, Sennheiser, Sony...)

A: The Godox WMicS1 Pro Kit 2 Two-Person Camera-Mount Wireless Omni Lavalier Microphone System uses the same 3.5mm TRS locking connector and wiring configuration as Sennheiser does for its lavalier microphones..