Split a single HDMI signal for identical output on up to 8 displays for digital signage, retail, or event space environments with the KanexPro 1x8 HDMI Amplifier & Cat 5e/6 Extender Kit 18Gb/sfrom KanexPro. The amplifier/splitter provides one HDMI 2.0 input and eight RJ45 outputs that connect to the eight included receivers to extend the HDMI signal over Cat 6/5e cable. The receivers allow you to extend 4K60 video up to 115' away, up to 4K30 video up to 164' away, and up to 1080p video up to 196' away. It also provides digital coax and 3.5mm audio outputs to de-embed audio from your HDMI input to send to speakers or a mixing board.

The receivers are powered over the Cat 6/5e cable, so there is no need for additional power adapters. Each receiver features an HDMI 2.0 output and they also support IR control pass-through using the included IR blaster and IR receiver cables. Other features include HDCP 2.2, EDID management, support for color depth up to 12-bit, HDR 10/10+/HLG/Dolby Vision, and audio formats including LPCM, Dolby True HD, DTS, and DSD.

Open Box Products Have a Limited 3-Year Manufacturer Warranty    Supports UHD 4K 3840 x 2160 Video    Splits HDMI Input to 8 x HDMI Outputs    8 x Cat 6/5e Receivers to Extend Signal    Transmit 4K30 Video up to 196'    EDID Management, HDCP 2.2 Compliant    3D, HDR, HDR10+, HLG, Dolby Vision    7.1CH HD Audio Pass-Through    12 VDC Power Supply    IR Blaster, 8 x IR Receivers Included

Distribute 4K HDMI video and audio signals to up to 8 HDMI displays over Cat 6/5e cable

Supports 4K60 transmission distance up to 115', 4K30 up to 164', and 1080p up to 192'

Control via IR using the included IR blaster/receiver cables

Audio support includes LPCM, Dolby Digital/Plus/EX, Dolby True HD, DTS, DTS-EX, DTS-96/24, DTS High Res, DTS-HD Master Audio, and DSD

HDR Support for HDR 10, HDR 10+, HLG, and Dolby Vision

Includes 8/10/12-bit color depth support with RGB, YCbCr 4:4:4 / 4:2:2, and YUV 4:2:0 color spaces

HDCP 2.2 and EDID support for multiple displays

Simple set up with zero configuration

Low power consumption with no power supplied needed for the receivers that support "Power over Cable"

Digital and analog audio de-embedded outputs

Related Questions and Answers

Q: 1. Has anyone tried running a 150 ft cat5e with it?

A: Yes. It works fantastic at any length. I personally have run it at 100ft with no signal loss and don't expect it to at 150 either. You can run 200+ with no issues, it's Ethernet baby!

Q: 2. Is there any sort of a delay from transmit to receive? I used other brands as a way to extend a computer monitor and had horrible lag. What is the lag like with this device?

A: This has a very low latency.

Q: 3. Is there any latency between this camera and other cameras connected to the computer via USB?

A: This will offer very little latency.

Q: 4. Does this unit support 3D input/output?

A: I have not used it with any 3D input so sorry but cannot answer your question.

Q: 5. Hello, is there an option to mix the inputs ?

A: Unfortunately that is not possible. The A-Neuvideo 1x8 4K60 HDMI over Cat 6 Extender Splitter with PoE, Auto Setup & 8 x Receivers only has 1 input therefore all 8 outputs will display the same image. If you need a product that has the capability of using multiple inputs consider a Matrix Switcher A-Neuvideo 8 x 8 UHD 4K2K HDMI Matrix Routing Switch (B&H # ANHD88KP MFR # HD-88KP)

Q: 6. Would this unit have 1 IR receiver and 8 IR transmitters? The 1 IR receiver would receive the remote control signal and the 8 IR transmitters would transmit/output the repeated IR signal to each connected video display.

A: Yes, 1 receiver and 8 transmitters.

Q: 7. is the 5V power adapter included?

A: In the Box KanexPro HDEXT50M HDMI Extender Kit Transmitter Unit Receiver Unit 2 x 5 VDC Power Supply Mounting Brackets

Q: 8. do i need two or one?

A: These come in a set. You need one set per video source. (One set for each TV)

Q: 9. What is the latency?

A: Model: OMX-HDMI-HDB1X8 has a latency of around 220ms.

Q: 10. Can I connect this to a 2.1mm or 2.5mm plug to use with a V-mount battery?

A: This unit is meant to run off an AC/DC power adapter which supplies 5VDC. V-mount batteries supply a nominal rating of 14.4VDC. If these two units were directly connected the splitter would be instantly damaged. In order that we may better assist you, please write us with further detail regarding what you wish to do. provideo@bhphoto.com.