As the company's premium line of instrument cable for electric bass guitar, the 12' Monster Prolink Bass Series 1/4" Male Instrument Cable 12'incorporates carefully designed construction to offer maximum bass extension, articulation, and dynamic range for discerning players and tone aficionados. It boasts custom Monster 1/4" TS male connectors (right-angle to straight) with 24kt gold contacts, and it features multi-gauge wire networks protected by MicroFiber, PEX, and carbon-infused dielectrics. Additionally, there is 95% copper braided shielding, collet strain relief, and a Duraflex jacket. The result is a top-shelf cable that yields minimal handling noise and magnetic interference while maintaining proper low-frequency performance and transients to improve the tone of your rig.

Premium Cable for Electric Bass Guitar    Custom Monster 1/4" TS Male Connectors    Right-Angle & Straight Connectors    24kt Gold Contacts    Minimal Handling Noise    Maximum Bass Extension & Fast Transients    Collet Strain Relief    Carbon-Infused Polymer Covering    95% Copper Braided Shielding    Lifetime Cable Warranty

Monster Bass pro audio cable's single heavy-gauge bass conductor delivers maximum low-frequency signal and taut, articulate bass, all without annoying buzzes and hums.

Multiple gauge wire networks preserve fast transients and wide dynamic range.

A dense shield rejects interference and hum, and heavy-duty 24kt gold connectors increase conductivity and resist corrosion.

Monster set the standard with the Original Lifetime Cable Warranty. Your Monster Bass pro audio instrument cable is covered by their 100% replacement guarantee, so you'll be a Monster for life.

• Multiple gauge high- and low-frequency wire networks for fast transients, greater clarity, and wide dynamic range
• Designed for tight bottom end and dynamic punch
• Custom Monster connectors with 24kt gold contacts
• Black, easy-grab barrel style
• Durable connector design featuring collet strain relief
• Duraflex protective jacket
• Carbon-infused polymer covering minimizes handling and vibration noise
• 95% copper braided shield minimizes interference and hum
• MicroFiber dielectric provides isolation of magnetic fields
• Lifetime cable warranty

Related Questions and Answers

Q: 1. Does it test minijack 1/8 3.5mm cables?

A: It does not test 1/8 mini (3.5mm) male connectors:Connectors:Speakon 4-pinSpeakon 8-pinXLR M/F 3-pinXLR M/F 5-pinRCA (phono)DIN - 3-pin/5-pin/7-pin/8-pinTS/TRSUSB - Type A to Type BRJ45Banana plugs

Q: 2. How fast can you drive with either a Gopro or an Iphone 14 pro mounted on your car?

A: The 3 Footed Monster Magnetic Mount (Pro) does not have a vehicle speed it's rated or verified to securely hold. Since the mount is magnetic, the speed at which it can be used securely will vary depending on several factors about the vehicle, such as the materials and thickness of the vehicle's construction.

Q: 3. Does it work with rode wireless go 2?

A: Yes this works with the Rode Go II

Q: 4. Can i use this to test lighting dmx cables?

A: Yes, the Kopul CBT-12 - 12-in-1 Cable Tester will allow for testing of DMX XLR cables.

Q: 5. Can the ball head be removed from the Basic 3 footed monster base?

A: The ball head on the 3 Footed Monster Magnetic Mount (Basic) is not designed to be removed.

Q: 6. Does this provide phantom power like the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion BH #DEDXLR? I want to use my Deity Microphones V-Mic D3 Pro into a Focusrite Scarlett Solo interface to stream on Twitch with. Would this work?

A: Yes, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable can be used for the same types of applications as the Deity Microphones D-XLR 3.5mm to XLR Adapter with Phantom to Plug-In Power Conversion. Like the D-XLR Adapter, the V-Link Cable has a built-in power converter that will allow you to use phantom power (48V) from the XLR input on the Focusrite Scarlett Solo USB Audio Interface and then converts it to plug-in power (3 to 5V), which the Deity Microphones V-Mic D3 Pro Shotgun Microphone requires to function.

Q: 7. Will this work the Synco D2 shotgun microphone (needs phantom) plugged into a passive Beachtek audio adapter?

A: No, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable will not work with the Synco Mic-D2 Hypercardioid Shotgun Microphone because it has a male XLR connector and the mic requires a female XLR connector. The V-Link Adapter Cable is intended for use with a microphone that has a 3.5mm output and requires plug-in power, but needs to connect to an XLR input. This cable does not allow phantom power to pass through to the microphone. It has a built-in phantom power converter that converts phantom power to 3 to 5V of plug-in power. The Mic-D2 needs to connect to an XLR mic input that can supply 48V of phantom power for the mic to operate.

Q: 8. Will this connect a Sennheiser EW G3/G4 RX to a MixPre's XLR input? If so, is it 100 (unbalanced) or 500 (balanced) wiring?

A: No, the Deity Microphones V-Link 3.5mm TRS Male to XLR 3-Pin Male Microphone Adapter Cable is not compatible for connection to a Sennheiser receiver. For a similar cable that is compatible for use with a Sennheiser wireless receiver, you can use the Cable Techniques Right-Angle Locking 3.5mm TRS to Low-Profile XLR Male Coiled Cable for Sennheiser (B&H # CACCG4X3M8) or the Sennheiser CL 35-XLR Right-Angle Locking 3.5mm TRS to XLR Male Coiled Output Cable (B&H # SE700062).

Q: 9. Hello. Does this monitor come with the mounting brackets in the bottom of the unit? Thanks

A: The brackets and monitor clamps are included with the MON-PSP/17.

Q: 10. what is the size of the Prompter Glass?

A: This Prompter uses 70:30 Glass. We have B&H # AUGLMWA which is 70:30 replacement glass for Autocue's 12 Teleprompters.https://bhpho.to/2f8BsGJ