From Roland 3.5mm TRS to Dual RCA Cable 5ftfeaturing a 3.5mm TRS connector on one end and dual RCA connectors on the other.

3.5mm TRS Male / RCA Male Connectors

Related Questions and Answers

Q: 1. Does this cable send the signals to L-R channels or to a single mono channel by blending them? Lisa S. didn't answer that.

A: The Sennheiser CL 35-Y Dual Locking 3.5mm TRS Male to 3.5mm TRS Male Coiled Y-Cable does not sum the signals to mono.

Q: 2. Is this product a Headphone Distributor. I need to send one stereo output equally to two stereo headphones?

A: This headphone splitter gives 1/4 male TRS (stereo) to dual 3.5mm female TRS meaning both outs are stereo so it will work with your headphones

Q: 3. The description indicates "single". Does that mean one cable or a pair of cables?

A: This is a single RCA to RCA cable, most commonly used to connect a sub-woofer to an A/V receiver.

Q: 4. Can this be used to run two mics into single mic jack on my camcorder?

A: These cables are designed to be used as a splitter for outputs. It is not generally recommended to use a Y-cable to combine mic inputs due to differences in internal wiring between mics and splitter cables. There is unfortunately no standard wiring scheme. To connect multiple mics to a camcorder, we recommend using a proper interface such as the Kopul CMX1.

Q: 5. can I jam time code to the Deity Tc1? and that get audio with as well with this cable on the sony 7iv in the audio port?

A: No, the Sennheiser CL 35-Y Dual Locking 3.5mm TRS Male to 3.5mm TRS Male Coiled Y-Cable will not work for the application described. Instead, you can use the Deity Microphones C12 Locking Right-Angle 3.5mm TRS to Right-Angle 3.5mm TRS Cable for Mirrorless/DSLR Cameras (B&H # DEDTS0158D64) to jam timecode from the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80) into the mic input on the Sony a7 IV Mirrorless Camera. Timecode on the TC-1 can be controlled using a smartphone app.

Q: 6. Since this is passive, it's bidirectional, right? So I can take the signal from XLR line level to an 1/8" video capture input.

A: The Sescom AUD-TRS-BAL 3.5mm Stereo Unbalanced Audio to Dual XLR Balanced Converter Cable has male connectors on the XLR ends (which are used for connection to XLR inputs) and converts an unbalanced 1/8" (3.5mm) stereo output signal to a balanced XLR input signal, so it would not work. As an option for connecting dual XLR line output to an 1/8" (3.5mm) line input, you can use a standard Y-cable like the Hosa Technology Stereo Mini Angled Male to Two 3-Pin XLR Female Y-Cable - 1' (B&H # HOYCSMMR2XF1). If the 1/8" (3.5mm) input is a mic-level input, you can use a level-matching cable like the Sescom Attenuating Line to Mic Level Cable - TRS Male to Female XLR, 18" (B&H # SES43DBMZ2XJ), which will convert the line-level signal to mic level.

Q: 7. I bought this to use with Tascam DR-40 and Audio Technica AT8024. The input level is too low for recording even with maxed out preamp level. How do I use this combo? Is this adapter right for AT8024?

A: The Tascam DR-40 only accept mic level devices via its XLR inputs. This adapter is incorrect. To connect the AT8024 in mono to the recorder, you would require an XLR adapter such as the Kopul A-XMMF. To use the mic in stereo, you will need a stereo mini to dual XLR Y cable such as the Kopul SMYC-M2XM06 and then an additional 3.5mm stereo turnaround adapter to connect to the mic. See the Hosa Technology GMM303.

Q: 8. I'd like to use this with the Comica Vimo Q 4, to output four independent channels to a mixer. Would this cable work?

A: The Saramonic SR-C2020 Dual 3.5mm TRS Male to Quad XLR Male Output Cable for Wireless Receivers (23.6") will not work with the Comica Audio Vimo Q Mini 4-Person Wireless Microphone System for Cameras & Smartphones (Black, 2.4 GHz), because the receiver only features a single 3.5mm output connector, and to use the cable, a dual receiver with dual 3.5mm output connectors is required.

Q: 9. Is the distance from each TS connector to the Y-junction 5' (i.e. total spread 10')?

A: No. the distance from the tip of the 1/8" connector to the tip of either of the TS connectors is 10'. The distance from each TS connector to the y-junction is considerably shorter than 5'.

Q: 10. Does it work with the Edirol by Roland R-09HR?

A: Yes it does. It works GREAT. I have had this for about a month and all I can say is so far so good.