This Roland Black Series 1/4" TRS to Dual 1/4" TS Cable is a 5' splitter cable featuring high-quality connectors and a low-capacitance design great for connecting DJ gear, effects, instruments, studio equipment, and more. It features multistrand, oxygen-free copper core wire and high-density spiral shielding to ensure reliability and quality sound.

Multistrand Oxygen-Free Copper Wiring    High-Density Spiral Shielding    Splits 1/4" TRS to Dual 1/4" TS

Related Questions and Answers

Q: 1. Does the back of the pouch have button straps or loops so it can be attached to a Pelican Molle panel?

A: Tenba Tools-Series Duo 8 Cable Pouch has loops on each corner so you can use multiple methods of attaching this pouch to Pelican EZ Click MOLLE Lid Panel. The back of the pouch has a 8.5 x 8 x 1.5" pocket. You can use the following fasteners. PortaBrace PS-6 6" Piggin String (Set of 3) BH #POPS6 • MFR #PS-6 https://www.bhphotovideo.com/c/product/65641-REG/Porta_Brace_PS_6_PS_6_6_Piggin_String.html

Q: 2. Can this be used as an audio DAC?

A: The Transcend TS-DBK5 3.5mm to USB Type-A Power Cable for DrivePro Body Series Cameras BH #TRTSDBK5 is used for charging only.

Q: 3. can I jam time code to the Deity Tc1? and that get audio with as well with this cable on the sony 7iv in the audio port?

A: No, the Sennheiser CL 35-Y Dual Locking 3.5mm TRS Male to 3.5mm TRS Male Coiled Y-Cable will not work for the application described. Instead, you can use the Deity Microphones C12 Locking Right-Angle 3.5mm TRS to Right-Angle 3.5mm TRS Cable for Mirrorless/DSLR Cameras (B&H # DEDTS0158D64) to jam timecode from the Deity Microphones TC-1 Wireless Timecode Generator Box (B&H # DEDTT0272D80) into the mic input on the Sony a7 IV Mirrorless Camera. Timecode on the TC-1 can be controlled using a smartphone app.

Q: 4. how long is it?

A: The manufacturer has not published the length of the SmallRig 3.5mm TRS to USB-C Audio Cable.

Q: 5. Each of the TA5F ends receives a summed L/R mono - correct? Just confirming this does NOT separate left from right.

A: The Cable Techniques CT-P35RLT2-24 DOES in fact split left and right channels between the two TA5 connectors. The purpose of the cable is to enable transmission of a L/R stereo mix from a 3.5mm source.

Q: 6. Is this an attenuation cable? Meaning, does it take a line signal and dampen it to be appropriate for a mic input? Line signals (such as a headphone/line out port) are typically too strong for mic inputs. So either the device would have to have a mic out 3.5 port, or an attenuation cable would have to be used to make the signal suitable for my camera.

A: No, this is not an attenuation cable, this one from Whirlwind is: https://www.bhphotovideo.com/c/product/767986-REG/Whirlwind_WHH4NL3_5_WHH4NL3_5_Line_to_Microphone.html

Q: 7. Is the distance from each TS connector to the Y-junction 5' (i.e. total spread 10')?

A: No. the distance from the tip of the 1/8" connector to the tip of either of the TS connectors is 10'. The distance from each TS connector to the y-junction is considerably shorter than 5'.

Q: 8. How does the mono signal from the 1/4" connect to the stereo 3.5mm plug? Are there summing resistors inside the cable or plug?

A: The Movo Photo WGA-1 Mono 1/4" TS Male to Stereo 3.5mm TRS Male Adapter Cable sums a stereo signal from the 3.5mm connector to a mono signal on the 1/4" TS, or conversely, sends a mono signal from the 1/4" to the stereo 3.5mm connection in a dual mono fashion.

Q: 9. Does the cable disconnect from the headphones,being easily replaceable?

A: No, cable is hard wired to the headphones.

Q: 10. Since this is passive, it's bidirectional, right? So I can take the signal from XLR line level to an 1/8" video capture input.

A: The Sescom AUD-TRS-BAL 3.5mm Stereo Unbalanced Audio to Dual XLR Balanced Converter Cable has male connectors on the XLR ends (which are used for connection to XLR inputs) and converts an unbalanced 1/8" (3.5mm) stereo output signal to a balanced XLR input signal, so it would not work. As an option for connecting dual XLR line output to an 1/8" (3.5mm) line input, you can use a standard Y-cable like the Hosa Technology Stereo Mini Angled Male to Two 3-Pin XLR Female Y-Cable - 1' (B&H # HOYCSMMR2XF1). If the 1/8" (3.5mm) input is a mic-level input, you can use a level-matching cable like the Sescom Attenuating Line to Mic Level Cable - TRS Male to Female XLR, 18" (B&H # SES43DBMZ2XJ), which will convert the line-level signal to mic level.