Ifootage Shark Slider Nano Bundle - Compact Camera Slider

Product Code: eq91642
Availability: In Stock

$2,337.00 $3,412.02

Qty

11 reviews Write a review

Description
Reviews (11)

Supporting a variety of camera rig sizes horizontally, vertically, or mounted on a tripod, the quiet and compact iFootage Shark Slider Nano Bundle - Compact Camera Sliderfrom iFootage Shark Slider Nano Bundle - Compact Camera Slideroffers smooth slides to heighten your production quality in a compact, portable form factor. The quiet, brushless motors propel your camera along the track that provides 2-in-1 bidirectional movement using a top or bottom carriage to extend the slider up to 15.7" sliding length to either side when mounted on a tripod.

The slider features an IPS touchscreen that allows you to control settings and movement, and it allows you to change between specialized preset DSLR modes or smartphone modes to utilize time-lapse, speed, keyframing, start/stop, and more. You can also control the slider using the free-to-download iOS/Android Moco app that provides control over time-lapse, photo shutter and camera start/stop using the included shutter cables for select cameras, and stop-motion animation movements.

It supports camera rigs up to 7.7 lb when mounted on a surface, up to 4.4 lb vertically, and up to 5.5 lb when it's mounted on a tripod. The top carriage mount also allows you to rotate the camera 360° using its own rotating design without the need to add a mounting head. There is a safety lock to quickly ensure the carriage is locked in place, carriage tension control to ensure stability, and a collision sensor that will stop the carriage before it collides with an obstacle.

The Shar Slider Nano is powered using an L-series battery, and an NP-F750 battery is included. The battery can be charged on the slider using the included USB-Type-C cable. A smartphone mount is also included with the slider.

Portable Motorized Slider, 2-in-1 Axis 16.6" Length, 15.7" Travel on Tripod Supports up to 7.7 lb Horizontally Supports up to 4.4 lb Vertically Supports up to 5.5 lb on Tripod Quiet, Steady Brushless Motors Power with Included L-Series Battery LANC Port for Remote Camera Control IPS Touchscreen, Smartphone App Control Stop-Motion, Time-Lapse

Key Specs
Sliding System	Motorized
Load Capacity	7.7 lb / 3.5 kg (Horizontal Surface-Mounted) 4.4 lb / 2 kg (Vertical) 5.5 lb / 2.5 kg (Horizontal Tripod-Mounted)
Travel Distance	7.9" / 20 cm 15.7" / 40 cm (Tripod-Mounted)
Pan & Tilt Range	Pan: 360°
Wireless	Bluetooth
Camera Mounting Screw	1/4"-20 Male
Weight	4.74 lb / 2.15 kg
Parameters
Load Capacity	7.7 lb / 3.5 kg (Horizontal Surface-Mounted) 4.4 lb / 2 kg (Vertical) 5.5 lb / 2.5 kg (Horizontal Tripod-Mounted)
Travel Distance	7.9" / 20 cm 15.7" / 40 cm (Tripod-Mounted)
Bubble Level	Yes
Control
Pan & Tilt Range	Pan: 360°
Wireless	Bluetooth
Mounting
Camera Mounting Screw	1/4"-20 Male
Quick Release Plate Type	No Quick Release
Tripod Mounting	3/8"-16 Female Thread 1/4"-20 Female Thread
Accessory Mounting	3/8"-16 Female (Rails)
Rail
Rail Material	Aluminum, Stainless Steel
Power
DC Input Power	7.4 VDC at 1.2 A
Battery
Battery Plate Type	1x Sony L-Series / NP-F (Built-In)
Physical
Track Dimensions	L: 16.6 x W: 4.3 x H: 2.8" / L: 42.1 x W: 10.8 x H: 7.1 cm
Body Material	Aluminum, Stainless Steel
Operating Temperature	-13 to 149°F / -25 to 65°C
Operating Humidity	0 to 80%
Weight	4.74 lb / 2.15 kg
Packaging Info
Package Weight	7.1 lb
Box Dimensions (LxWxH)	20.6 x 7.27 x 4.25"

Compact, portable motorized slider with quiet, brushless motors

Supports up to 7.7 lb horizontally

Supports up to 4.4 lb vertically

Supports up to 5.5 lb mounted on a tripod

IPS touchscreen control

LANC port for remote camera control

Up to 15.7" of camera travel (bidirectional on a tripod), 16.5" total length

iOS and Android control app with time-lapse and stop-motion effects

Robust aluminum and stainless steel build

Uses widely available LP-E6-type batteries

Related Questions and Answers

Q: 1. Can you use a Blackmagic Ursa Mini Pro with this?

A: Yes you can. The Shark Slider Motion Control Kit has a 15 pound load capacity. Just as long as the battery and lens you are using for the Ursa Mini keep the load under 15 pounds you will be able to use this kit.

Q: 2. Can this slider be operated manually without using the motorized function?

A: Yes, the iFootage Shark Slider Nano Bundle will support both manual and motorized slides.

Q: 3. Is it possible to extend the reach of the Nano slider by adding rods? How?

A: If you are referring to support rods, no, they will not extend the reach of the iFootage Nano Slider.

Q: 4. There is no shutter cable to support the Sigma fp camera. Can the Sigma fp be used on this slider without one? If so, what, if any, functionality would be lost?

A: Yes, any camera that stays within the recommended maximum weight capacity will work with the slider, but without a shutter cable there would be no control over time-lapse, photo shutter, and the start/stop recording function.

Q: 5. If the track length is 16.6" and the travel distance is 7.9", does that mean the slider has an effective slide distance of about 25"?

A: When mounted on a flat surface the slide distance is 7.9 inches When mounted on a tripod the slide distance is 15.76 inches.

Q: 6. What’s the width of the feet, if I were to set it on an 18” wide table top for example?

A: The exact width of this unit is not listed. However if the table is 18" wide, along with being at least 31 or 47 inches long to accommodate the length of this kit, it will fit fine. It is only a few inches wide.

Q: 7. Will this slider constantly move back and forth once A and B are set?

A: Yes, The iFootage Shark Nano slider can repeat A to B position slides.

Q: 8. Does this slider also provide pan movement?

A: The Shark Slider Nano provides panning which is built into the unit.

Q: 9. Does it come with a carrying case?

A: Yes, a very nice one.

Q: 10. What does the "bundle" include?

A: The bundle includes: - NANO Slider - USB Type-C Charging Cable - Carrying Case - NP-F750 Battery - Smartphone Mount - 5 Shutter Cables

Marco	01/09/2024
[1/4"-20 Male] I usually make Timelapse's so this product was a must due to the size, weight, and capabilities. The interface without needing the app is just perfect. But I have to start with what I dislike. First of all, you need to calibrate it every single time you turn it on, if you turn it off, you're gonna have to take everything off, Re-calibrate, then you have to put the tripod head and camera on it again. Also, I don't know if it's just my product, but whenever I try to calibrate it when on, it gets stuck at around 20%, so I have to force shut it off, then turn back on to allow the startup calibration. Using it vertically feels unsafe, I couldn't get my Mirrorless camera to work safely (But I might me doing it wrong, still need to experiment more with it), but it works well when using with a Phone. If you have a big Quick-Release plate, it's gonna be a pain to put on due to the turn-lock being in the way. Now with what I love: the ability to be able to use while connected to power is great, and the ability to switch between batteries is also a Plus. It's very smooth, and when mounted on a tripod, the sliding reach is great. The sound it makes while sliding is unnoticeable, but it also depends on the speed. 5

James	15/08/2024
[0 to 80%] Easy to use and versatile. Flywheel makes movement very smooth. Extra rods are easy to install. 5

MIGUEL	14/08/2024
[0 to 80%] Very easy to use and compact! 5

Lance	16/07/2024
[Pan: 360°] Love this thing, perfect for b cam or Timelapse! Super simple and super easy to use! 5

Sean	02/07/2024
[1/4"-20 Male] Works as advertised and is built very well, happy customer so far! 5

Daniel	17/06/2024
[1/4"-20 Male] Made well and runs smoothly. I like that its compact and fits easily for travel. Had to look on youtube on how to run it but was pretty straightforward. 5

Brandon	15/06/2024
[Yes] This product is amazing, I do a lot of architectural video with a camera that doesn't handle 120fps in 4K. Cue the iFootage Shark, I can set it to handle my slider and tell it to take a minute to get from A to B. Too slow? You can always speed up in post, slowing is an issue. My only wish is that they bring camera tilting into the next version - then it will be a true Edelkrone/Rhino killer. That said, I still take this with me on every shoot. 5

Arshley E.	14/06/2024
[1/4"-20 Male] Very very very smooth...it is truly worth the money!!! 5

WBT	02/05/2024
[Motorized] At the beginning of last year I started looking for a slider for my videography needs and purchased two other brands that were big disappointments before finding the iFootage Slider. After receiving the slider I had a problem with updating the firmware to the current version through the app and iFootage was no help. B&H on the other hand were Excellent as usual. The Pro Video team actually took another slider out of stock to see if they could get it to update and it did. I then returned the slider back to B&H and received my replacement and had no issue updating the firmware. I have only used it on a handful of projects, but it has worked great so far. I like that you have the ability to tighten the sliders wheels easily based on the load and ambient temperature. The on-slider display work great in all conditions and it is supper easy to setup a shot almost to easy it makes you want to use it all the time. I was wanting a slider that did not have to use an app to work and this one is the ticket. I would definitely recommend this slider. 5

Bernardo G.	12/04/2024
[1/4"-20 Male] I was looking for a slider that was portable but at the same time sturdy. And this was the best choice! The wheel for moving the cart it's really helpful and helps for a good balance. 5