Juicebox Quick Release Mount For Jbmp Jbdp Batteries

Product Code: eq91675
Availability: In Stock

$59.97 $80.36

Qty

19 reviews Write a review

Description
Reviews (19)

A useful spare item to keep in your kit as it doesn't take up much space, the Juicebox Quick Release Mount for JBMP JBDP Batteriesis a replacement for the QR plate that comes with your Magic Power 2.0 battery. It includes the QR mechanism and proprietary plate, as well as three 1/4"-20 screws for mounting onto your battery or other device.

For Magic Power 2.0 Batteries For DSLR Power Kits

General
Compatibility	Not Specified by Manufacturer
Physical
Mounting	1x 1/4"-20
Dimensions	6 x 4 x 1" / 15.2 x 10.2 x 2.5 cm
Weight	0.1 lb / 45 g
Packaging Info
Package Weight	0.14 lb
Box Dimensions (LxWxH)	5.85 x 3.45 x 0.5"

Related Questions and Answers

Q: 1. What is this thing? The entire tripod head, or just the little adapter that goes between the GoPro and your existing tripod head?

A: The Kupo Quick Release Metal GoPro Tripod Mount is a mount for attaching GoPro quick release attachment to 1/4"-20 accessories like a tripod.

Q: 2. Can this power a blackmagic 6k? if so, how may hours could i get when shooting?

A: Rough estimate of 6 hours.

Q: 3. How long will it power a CINEGEARS Ghost-Eye Wireless HDMI & SDI Video Receiver?

A: The Juicebox Lithium-Ion Battery with D-Tap Charger (95Wh, V-Mount) (B&H# JUJBVB95) could indeed be used to power V-mount battery plate equipped CINEGEARS wireless SDI and HDMI receivers. While there are several different such CINEGEARS models, they typically use about 10W of power and so could be expected to run for up to about nine hours on this battery. However, battery-powered run times will vary by model, settings, and conditions of use.

Q: 4. Is this capable of powering the Red Komodo?

A: Yes but the issue might be the inability to get a proper charge reading on the camera.

Q: 5. How do I use this with a novoflex magicball?

A: Simply screw this clamp to the top of the magic ball by removing the screw from the clamp.

Q: 6. There are 2 versions to choose frm: 1 handle w/a "quick release adapter" &1 w/a "quick release mount." What's each one used for?

A: The Falcam F22 Quick Release Side Handle with Quick Release Adapter, comes with the quick release. The Falcam F22 Quick Release Side Handle with Quick Release Mount, does not come with the Quick Release plate. One is used when you already have the Quick release plate and the other is when you need it.

Q: 7. What does it bottom looks like? Does it has 1/4 or 3/8 screws?

A: it has both 1/4 20 and 3/8 16 threaded holes on the bottom.

Q: 8. Can this be charged with an Anton Bauer TM4 Logic Series?

A: Yes it should however we can not guarantee consistent results. Anton Bauer has firmware built into their batteries that talk to the chargers If you attempt to charge other batteries on the charger it may stop charging without warning. It is best to charge this battery via the included D-Tap charger.

Q: 9. how does it charge TWO batteries simultaneously if there is only one battery charge outlet?Albert

A: There are two battery chambers on this charger, which connect to a plug via one cable.

Q: 10. Can the Q=Mount be attached to the top of a monopod which has a 3/8" stud?

A: Yes, it has a 1/4-20" and a 3/8" thread attachment.

Grayson	26/09/2024
[0.14 lb] These work great and were not too hard to install on my minimax (after watching a couple YouTube video). It works great with my fx3 as a little handheld run-and-gun setup. I have also screwed one into the base of a 70-200 lens for a tight hand-held style bcam. If I ever have a gimbal shoot in the rain, I’m looking forward to screwing a ball head into the bottom of my dji rs2 and attaching my easy rig umbrella :) 5

Onno	14/09/2024
[0.14 lb] Incredibly simple concept but so well designed. This low profile mounting mechanism allows me to get the camera higher to be closer to eye level on tall actors. 5

Sue	11/09/2024
[0.14 lb] Just be sure to occasionally use the special Allen wrench included with the product. During roughly 10 years, I failed to tighten the screw & without my knowledge, the QRM eventually worked its way loose. 5

Michael	17/08/2024
[0.14 lb] I really wanted the 150 watt V-Mount but right now they seem very hard to get from JuiceBox so I got the 95watt V-Mount. It did its job without problems. I was happy with the out come. 5

Lenny	05/08/2024
[0.14 lb] Trigicon really has their system figured out. This mount is perfect with their RMR on my Mossberg 500. It is so simple I didn't even need instructions. Would buy again. Great customer service when i called on the phone To check and see if it was in stock and like the web site said, it was! Thanks B&H 5

Sean	04/08/2024
[0.14 lb] Not only does the quick release make connecting camera quicker I find it helps balancing. Highly recommend 5

Sahel	29/07/2024
[0.14 lb] It's a great product, simple but very useful. It's easy to install. You have great mobility with it 5

Jimmy	19/07/2024
[0.14 lb] My Easyrig came with the clip and I wanted a quick release that was easier for a handheld set up. It took me less than 10 minutes in total to install, including reading the manual. Tested it on a shoot and I'm happy to report the camera did not fall. I like that it came with 4 attachment screws. 5

Jake	18/07/2024
[0.14 lb] This is the best option for easyrig quick release systems. It's super low profile unlike some of the other options out there like the Kong. No need to worry about the hook sliding off your top handle either 5

Emilio	16/07/2024
[0.14 lb] Used it for 6 days now and Im very happy with it compared to frog clamps or the standard Easyrig hook. Easy to mount/unmount, secure with improved range of motion, and higher clearance for a greater range of heights possible. I know some people that have expressed concern that it wouldnt support their camera but Ive been using it with an Alexa classic with Optimo zooms and have never been worried it would fail or release. These should be the default hook on an Easyrig. 5