Bubblebee Windkiller SE for DPA 4097 Microphoneis a furry windshield that effectively protects your DPA 4097 or 4099 microphone against wind noise, while remaining acoustically transparent—ideal for accurate outdoor recordings.

The Windkiller SE's outer layer features high-density, soft, multi-pile fur, which gradually slows the wind down before it reaches your mic. Inside, a super-soft, smooth, open material helps maintain acoustic transparency.

The black elastic tab and press stud keeps The Windkiller SE firmly attached to your microphone. It seamlessly blends into the windshield to remain discreet.

When fitted correctly, The Windkiller SE holds a bubble of dead air around the front of the mic capsule, allowing the microphone to function as naturally as possible and keeping wind interference at a minimum.

Fits DPA 4097 and 4099 Microphones    Multi-Pile Fur Design    Sound-Transparent Inner Fabric    Made in Denmark

• Designed to fit the DPA 4097 micro shotgun and DPA 4099 instrument microphones.
• Uses proprietary, multi-pile fur for the ultimate protection against wind noise.
• Transparent inner fabric maintains a very natural frequency response, on- or off-axis.
• Manufactured in Denmark with quality and comfort in mind by sound lovers, for sound lovers.

Related Questions and Answers

Q: 1. Will this work with the AT4053B?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics is compatible for use with the Audio-Technica AT4053b Hypercardioid Condenser Microphone.

Q: 2. Does it work for sennheiser mke600? If not, which one do you have that does fit it?

A: Yes, the Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics will fit mics with a diameter of 18 to 24mm, and the Sennheiser MKE 600 has a diameter of 20mm.

Q: 3. Will this work with the Deity S-Mic 2S? (BH #DESMIC2S)

A: The medium-size Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (Medium, Black) is too long for the Deity Microphones S-Mic 2S Moisture-Resistant Short Shotgun Microphone. The mic is 5.83" long and the inside depth of the windshield is 5". Instead, use the small-size Bubblebee Industries Windkiller Long Fur Slip-On Wind Protector for 18 to 24mm Mics (B&H #BUBBIWKS), which has an inside depth of 4".

Q: 4. Is this the tape for outdoor fur? With the small hole in the center? Done

A: This is double sided tape intended to stick directly to skin or certain types or fabrics then the mic is stuck to the top of that. It woud depend on the fur you are sticking to. There would be some experimentation.

Q: 5. Can Windkiller SE(Large) cover a foam windscreen measuring 57mm top diameter, 68mm bottom diameter and 80mm height?

A: The large Bubblebee Industries The Windkiller SE Windscreen is intended for use with the X/Y microphone on recorders such as the Zoom H5 (XYH-5 Capsule), Tascam DR-40/40X, and Sony PCM-D100. To give you a better idea of the size, the dimensions of the Zoom XYH-5 Microphone Capsule are 2.6 x 2.4 x 1.6" (65.5 x 62.2 x 41 mm). It is most likely too small to accommodate the dimensions you require. Please contact us by phone or through live chat and let know which microphone or recorder that will be the windshield with. Another option would be to make your own windshield using the Bubblebee Industries The Piece-A-Fur Wind Protection - Black (B&H # BUBBIPAFBK) which measures 14.1 x 4.3" (360 x 110 mm)

Q: 6. What is the inner diameter and depth in cm?

A: The Bubblebee Industries The Windkiller SE Windscreen is designed to fit over the built-in stereo X/Y microphones on portable handheld recorders like the TASCAM DR-40x, Zoom H5 and H6 with the XYH-5 capsule, and Sony PCM-D100. The manufacturer has not provided dimensions, but we can use the dimensions of items like the the Zoom XYH-5 capsule and the Sony PCM-D100 to provide a better estimate of the size. The XYH-5 capsule measures 2.6 x 2.4 x 1.6" (65.5 x 62.2 x 41 mm). Additionally, the fourth photo on the item page shows the windscreen used with the Sony PCM-D100, which measures 6.2 x 2.8 x 1.3" (7.2 × 15.7 × 3.3 cm).

Q: 7. I see the output impedenace is 135 ohms. What is the input impedance? I can't find this stat anywhere on their website. Thanks!

A: sE Electronics lists the recommended load impedance for the DM1 Dynamite Active Inline Microphone Preamp as greater than1k ohms. You can find the complete list of specifications on page 4 of the user manual: https://www.bhphotovideo.com/lit_files/636703.pdf

Q: 8. Is there a good case to put this equipment in? I am looking to be able to pack it up and take it with me when necessary

A: I have not seen a compatible case for this reflection filter or one like it. I surmise that a case for something odd-shaped such as this reflection filter would be unreasonably large. I have a slightly larger reflection filter that I just bag up in a clear plastic bag, or I put it into a drum throne bag if I want it padded.

Q: 9. Does this microphone connect with laptops and mpcs

A: This large diaphragm microphone would require an audio interface with the ability to provide 48 volt phantom power in order to connect to a computer. A very good choice would be the Audient iD14 10x4 USB Audio Interface, B&H # AUID14.

Q: 10. Is it okay to use this with a shotgun microphone that can take a battery for its phantom power, such as the Senheisser MKE 600?

A: Yes, the sE Electronics DM1 Dynamite Active Inline Microphone Preamplifier could be used to increase the gain of a battery-powered shotgun microphone such as the Sennheiser MKE 600, but doing so may overload the input connection or exaggerate the self-noise of the microphone.