The Sennheiser MZW 600 Foam Windshield for MKE 600is a slip-on foam windshield designed for use with the Sennheiser MKE 600 shotgun microphone. Its foam material helps it achieve up to 25 dB of wind noise reduction, making it ideal for indoor and outdoor recording scenarios.

For MKE 600 Shotgun Microphone    Up to 25 dB of Wind Noise Reduction    Foam Material    Easy Slip-On Installation

Related Questions and Answers

Q: 1. Does this fit a sennheiser 600 shotgun microphone?

A: The MZW 8060 windshield is designed for the length and diameter of the MKH 8060 microphone. The MKE 600 does have a similar diameter, however Sennheiser offers a windshield designed for it as well the MZW600. There are also several foam windshields available from third party manufacturers that offer similar performance.

Q: 2. Will the included XLR to 3.5mm TRS adapter cable allow me to connect this microphone to the Tentacle Sync-E audio recorder?

A: No. The included Sennheiser KA 600 XLR Female to 1/8" TRS Male Connection Cable will not connect directly to the locking input on the Tentacle Sync TRACK E Pocket Audio Recorder because the cable has a non-locking 1/8" (3.5mm) connector. As a better option, you can use the Remote Audio 3-Pin XLR Female to 3.5mm TRS Locking Adapter Cable for Sennheiser G2 Transmitter - 2' (B&H # RECASEK100L) which will connect properly to the recorder's locking input. Or if you do want to use the KA 600 Cable, you can adapt it by adding on the Hosa Technology GMM303 3.5mm Female Stereo Mini to 3.5mm Female Stereo Mini Adapter (B&H # HOASMFSMF) and attaching the Sennheiser CL1 3.5mm to 3.5mm Output Cable for EW Series Camera-Mount Receiver (B&H # SECL1), which has the proper size locking connector.

Q: 3. is it balanced mic? in both cases - phantom, battery?

A: I think you're asking if has a balanced input? If so, the answer is yes. With its power switch set to off , it takes phantom power from the mic cable. With the power switch set to on , it powers itself from an internal AA battery.

Q: 4. mke 600 work with pc if we use xlr to 3.5 without use any audio interface thanks

A: The MKE-600 can be used without an interface when using the mic with battery power and the proper cable adapter. Sennheiser offers properly wired adapter cables. These are recommended for connection to 3.5mm TRS or TRRS inputs.

Q: 5. Will this work with an Alexa Mini LF without the need for a Pre Amp?

A: A Pre Amp would be required. Also there are other parts that would need to be added to connect and work with the microphone on an Arri LF camera. Preamp choices - Beachtek DXA-ALEXA Low-Noise Preamplifier for ARRI ALEXA Mini Camera BH #BEDXAALEXA • MFR #DXA-ALEXA Beachtek BT-PWR D-Tap to 2-Pin LEMO Power Cable for DXA-ALEXA / DXA-CINE BH #BEBTPWR • MFR #BT-PWR Beachtek BT-LEMO XLR5F to Right-Angle LEMO Adapter Cable (17.7") BH #BEBTLEMO • MFR #BT-LEMO Also you would need this for the camera - ARRI SAB-1 Side Accessory Bracket for ALEXA Mini BH #ARSAB1 • MFR #K2.0012692

Q: 6. Does the mke 600 support plugin power?

A: The Sennheiser MKE 600 Shotgun Microphone can be powered with a single AA battery or with 48V of phantom power, which is a much higher amount of voltage than plug-in power. Phantom power is delivered through an XLR mic input while plug-in power is typically 1 to 10V and it is delivered through a 3.5mm mic input. The MKE 600 will not work with plug-in power from a 3.5mm mic input, but will work with phantom power from an XLR mic input.

Q: 7. Shock mount

A: It comes with a basic shock mount; works okay on a boompole but might want to upgrade it for critical studio use.

Q: 8. What is a maximum working distance for the MKE600?

A: For the best sound keep the microphone within 3-5 feet distance from the subject, the further the microphone is place the more background noise it will pick up.

Q: 9. on which focal length you start see the mic in frame?

A: It depends on where you have the mic suspended or if you have it mounted to your camera.

Q: 10. Will this work on the $299 Rode blimp windshield?

A: Yes, the Sennheiser MKE 600 Shotgun Microphone can be used within the Rode Blimp Windshield and Rycote Shock Mount Suspension System for Shotgun Microphones (BH #ROBLIMPR).