Record from and manage up to eight cameras at resolutions up to 3840 x 2160 with the Vivotek ND9323P 8-Channel 4K UHD NVR No HDDfrom Vivotek. This recorder is equipped with two 3.5" HDD ports that have a 16TB total storage capacity (HDDs available separately). H.265, H.264, and MJPEG codecs keep file sizes manageable while maintaining the best quality possible.

This unit features HDMI and VGA ports, an audio input, and an audio output. Remote management is possible thanks to the iViewer app for iOS and Android. Compliance with ONVIF profile S enables interoperability with ONVIF cameras.

Record from and Manage up to 8 Cameras    Up to 3840 x 2160 Recording Resolution    16TB HDD Capacity (Available Separately)    H.265, H.264 & MJPEG Codecs    Audio Input & Output    HDMI & VGA Ports    iViewer App for iOS & Android    Complies with ONVIF Profile S

Embedded Linux OS

Recording modes include continuous, schedule, manual, and event

4K UHD video output

HDMI and ports

Fisheye dewarping

1x1, 2x2, 3x3, 1M+5, 1P+3, 1P+6, 2P+3, and 3V multilayout live display

PTZ operation includes direction control, home, iris, preset, patrol (group), and PiP control

HDD S.M.A.R.T disk management

1000M RJ45 Ethernet

1 x USB 3.0 and 1 x USB 2.0

Watermark support

Compatible with Internet Explorer 10 (32-bit) or higher for Windows, Chrome 68.0.3 or higher for Windows, iViewer for Android and iOS, VIVOCloud, Shepherd, and VAST 2

Watchdog hardware and software

Power restoration restarts the system automatically after power recovery

CE, FCC, VCCI, C-Tick, UL, CB, BSMI, and BIS certified

Related Questions and Answers

Q: 1. What is the type and model of HDD that is preinstalled?

A: Hikvision has been using WD Purple drives.

Q: 2. Does it come with a wall plug? What type? The 'what's in the box' description' doesn't mention one. Thanks

A: Yes a power cable and AC wall plug is included. It is a two-bladed North American type.

Q: 3. Will this support non-hikvision cameras?

A: Yes as long as the cameras are ONVIF compliant. If you do go that route make sure you set up the camera first with a computer and then add it manually to the NVR.

Q: 4. Is it possible to access the connected IP cameras directly from other network devices over the LAN port?

A: Yes, with a web browser you would access the system and go to Configuration Network Advanced Settings Other, click the check box for Enable Virtual Host, click save. Then you would go to the IP camera management interface and you will see a connect column on the right-most side of the camera list.

Q: 5. I am new to this (security camera's) and Hikvision seems to have SO MANY options and variations. I will have 4 (4mp) camera's and 2 (6mp) cameras for my house and hopefully set to record upon motion. How long will 2TB allow recording time wise before overwriting? Also what is the difference between Q2 and I2 versions of this NVR? Any help would be greatly appreciated.

A: This NVR could easily store up to a month of footage depending upon the frequency of motion triggered events, frame rate and compression type chosen. The Q2 series tops out at 4K UHD (8mp) (1 camera) resolution and the I2 series will host up to 12 MP network cameras (Hikvision and third-party).

Q: 6. are the colorvu cameras compatible with this system?

A: Yes, you can use the colorvue cameras with this NVR. You should make sure that you are using the latest firmware.

Q: 7. Can this NVR replace my old Hik-vision NVR (DS-7608NI-E2/8P-2T)/SF Version 3.3..4_150811 if so: would i be able to just connect my 6 ip cameras to your listed NVR (Plug and play), or do i have to do some configuarations. i.e. add ip addr, ea camera separately?? Is this /nvr compatable with DOME camera (DS-2CD2132F-1/ DS-2CD2132F-IWS/bullet camera DS-2CD2032-I??

A: The Hikvision DS-7608NI-Q2/8P 8-Channel 4K UHD NVR (No HDD) BH #HI7608NIQ28P should work with your current IP cameras. You will havew to add each camera and set them up.

Q: 8. Foscam HT2 PTZ camara is compatible with this PoE NVR?, Thanks

A: The Hikvision DS-7604NI-Q1/4P 4-Channel 4K UHD PoE NVR with 1TB HDD BH #HIQ14P1TB will not work with FOSACAM products.

Q: 9. Will this take a 4K HDMI input and record to a SSD?

A: This unit does not support HDMI input. The only way I could think of to get a 4K HDMI into this is if there is a HDMI encoder that is ONVIF compliant. As for SSD, technically you could put a SATA SSD in the recorder but those would be more expensive compared to Surveillance HDDs, especially in the larger sizes.

Q: 10. Will I be able to see my camera function on my iphone device with this NVR?

A: You will be able to view the cameras on the Iphone through an application once the NVR is connected to your home network that is connected to the internet.