Ashly Nxe1.54 Network Power Amplifier

Product Code: eq9200
Availability: In Stock

$12,987.00 $16,623.36

Qty

8 reviews Write a review

Description
Reviews (8)

The NXE1.54 Network Power Amplifier from Ashly Audio is the networkable version of the nX amplifier. It comes with Ethernet control, serial data control, aux preamp outputs, instant standby mode, preset recall, fault condition logic outputs, and optional network audio and digital audio capability. All these are controlled using Ashly Audio's Protea software suite. This amplifier is designed to meet the most demanding live sound and fixed installation sound systems in stadiums, arenas, performance venues, worship spaces, and convention centers.

Ashly EMS 70V, 100V Rated Uses Neutrik Components High-Z / Low-Z Selectable

General Specifications
Maximum Output Power	Max Output Power Per Channel, EIAJ Test Standard 2 Ω: 1,500 W, 4 Ω: 1,500 W , 8 Ω: 1,250 W Low Z output, Bridge Mode, 20Hz to 20kHz, 1%THD, All Channels Driven 4 Ω: 3,000 W 70 V, 100 V Output, All Channels Driven 70 V (per channel): 1,500 W 100 V (per channel): 1,250 W
Power Draw	Total Power Draw All Channels Driven Sleep Mode: <1 W Standby Mode: 70 W Idle (no signal): 100 W
Current Draw	Current Draw 120VAC Mains (divide in half for 240V) Sleep Mode: 0.1 A Standby Mode: 1.30 A Idle (no signal): 1.85 A Maximum Current Draw All Channels Driven, Divide by 2 for 240VAC Typical: 16.0 A
Dissipation	Thermal Dissipation BTU/hr, All Channels Driven Sleep Mode: <3.4 Standby Mode: 238 Idle (no signal): 340 Typical (1/8 max power): 1,700
Power Requirements	Power Requirements (@ 50/60Hz) Nominal (Automatic Sensing SMPS)@ 50 Hz Nominal (Automatic Sensing SMPS): 120 VAC Operating Range: 70 to 135 VAC Minimum Power-Up: 85 VAC Power Requirements @ 60Hz Nominal (Automatic Sensing SMPS): 240 VAC Operating Range: 140 to 270 VAC 170 VAC
Power Connector	Power Cable Connector: 20 A powerCON
Input Source	Input Source Select Options (Protea DSP): Analog, Auto (Net, AES3, Analog)
Limiter	Brick Wall Limiter (Protea DSP) Threshold: -20 to +20 dBu Ratio: Infinite Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB
Compressor	Threshold: -20 to +20 dBu Ratio: 1.2:1 to infinite Attack: 0.2 to 50 ms Release: 5 to 1000 ms/dB Detector: Peak / average Attenuation Bus: 2 available Metering: In, out, attenuation, graphical
Control	Autoleveler Controls Target Level: -40 to +20 dBu Action: Gentle, normal, aggressive, user defined Maximum Gain: 0 to +22 dB Metering: Input, Gain, Attenuation Ratio: 1.2:1 to 10:1 Threshold Below Target: -30 to 0 dB Gain Increase/Decrease Rate: 5 to 1000 ms/dB Hold Time: 0 to 6 s
Noise	Ambient Noise Compensation: Output Only Max Gain: -20 to +20 dB Min/Base Gain: -40 to +20 dB Gain Change Rate: 0.2 to 20 s/dB Link Group: 16 available ANC Input Channel: 1 to 2 or 1 to 4 Noise Threshold: -40 to +20 dBu Program/Ambient Gain Ratio: 0.3:1 to 3:1 Metering: Input level, Attenuation, Average noise
Ducking	Ducking: High/Low Priority, Trigger, Filibuster, Ducked Program Trigger Threshold: -80 to +20 dBu Ducking Release: 5 to 1000 ms / dB Ducking Depth: 0 to -30 dB, -∞ Metering: Input
Gate	Threshold: -80 to +20 dBu Range: off, 100 to 0 dB Attack: 0.2 to 50 ms/dB Release: 5 to 1000 ms/dB Metering: Key signal, Gate LED, graphical Advanced Gate Controls Key Frequency: 20 Hz to 20 kHz Key Bandwidth: 0.016 to 3.995 octave
Gain	Gain (with/without VCA): -50 to +12 dB, off, polarity invert Digital VCA Groups: 4 available Remote RD8C Gain: Enable per channel, 0 dB to -∞ WR-5 (neWR-5) Remote Gain: 0 to -50 dB, mute
Band	31-Band Filter Type: Constant Q or proportional Bandwidth: 0.499 to 0.25 oct Parametric 2,4,6, or 10 Band Frequency: 20 Hz to 20 kHz Level: -30 to +15 dB Q Value: 0.016 to 3.995 octave Hi/Low Shelf 6/12 dB/oct Frequency: 20 Hz to 20 kHz Level: -15 to +15 dB All Pass Frequency: 20 Hz to 20 kHz Variable Q HP/LP Frequency: 20 Hz to 20 kHz Q Value: 3.047 to 0.267 Notch/Bandpass Frequency: 20 Hz to 20 kHz Q Value: 92.436 to 0.267 Filters: 12 Filter Modes: Float, restricted, manual Filter Type: Notch, parametric Filter Frequency Range: 20 Hz to 20 kHz Notch Filter: -∞ Parametric Filter: +15 to -30 dB Filter Bandwidth: 0.016 to 3.995 octave Detector Sensitivity: 5 levels Float Time: 5 minutes to 24 hours Bessel & Butterworth Filters: 12/18/24/48 dB/oct Linkwitz-Riley Filter: 12/24/48 dB/oct Frequency: Off, 20 Hz to 20 kHz Speaker Delay: 0 to 21 ms Delay: 0 to 682 ms Speaker Delay: 0 to 10.6 ms Delay: 0 to 341 ms
Audio Metering	Range: -60 to +20 dBu Increments: 1 dB Signal Level: Off, -50 to +20 dBu Sine Wave Frequency: 20 Hz to 12 kHz
Matrix Type	Matrix Mixer Gain (0.5dB increments): Off, -50 to +12 dB Mute: Per channel Auto-mixer Enabled: Per channel Global Auto-mixer Response: 0.01 to 2 sec Ducking LED: Per channel if enabled Metering: Level, auto-mixer level
Processor	Input A/D, Output D/A: 24-bit DSP Processors: 32-bit floating point Sample Rates: 48, 96 kHz Propagation Delay @ 48kHz: 1.42 ms Propagation Delay @ 96kHz: 0.71 ms
Other Specifications
Cooling	Continuously variable temperature controlled axial fan(s)
Environmental	Non Condensing: 32 to 113⁰F ( 0 to 45⁰C)
Dimensions	19.0 x 3.5 x 16.8" (483.0 x 89.0 x 428.0 mm)
Weight	<28 lb (12.7 kg)
Packaging Info
Package Weight	27 lb
Box Dimensions (LxWxH)	19 x 16 x 4"

2-channel high-output, lightweight amplifier with programmable output on each channel

Power saving, Energy Management System (Ashly EMS) automatic <1W sleep mode is defeatable

Front panel power switch and level controls can be disabled for security

Neutrik Combo XLR: 1/4" TRS jack plus Euroblock input connectors

Neutrik speakON twist locking loudspeaker connectors for security, safety, and reliability

Rear panel DIP switches per channel for selection of high pass filter, limiter, input gain, and High-Z or Low-Z speaker output configuration

Ethernet port for use with control and monitoring of amplifier functions, with front panel COM activity LED

Serial data port for use with Ashly remote control devices, or RS-232 converter (sold separately) for third party controllers (INA-1)

Uses Protea software to remotely disable all front panel controls, including the on/off switch, for a tamper-proof installation

Real-time clock with event scheduler

Instant standby mode, 30% reduction in power consumption with on/off triggered by contact closure, software control, or event scheduler

Programmable power-on delay

Preset recall via contact closure, software control, remote control, or event scheduler

Auxiliary preamplifier outputs and fault condition logic outputs

Cobranet or Dante network audio (sold separately) and AES3 digital audio input with pass-through

Ducking at mixer, peak hold indicator, in/out per filter, key engage, lock per filter, and global lock

Related Questions and Answers

Q: 1. Can I hook an equalizer to this Marantz stereo power amplifier?

A: Unfortunately newer Amplifiers (and Receiver Amplifiers) no longer offer the ability to connect a separate Equalizer like the older models. The current models no longer provide Input / Output ports for Equalizers.

Q: 2. Is this the correct picture for the SA120A? It does not appear to be rack-mountable as mentioned in the description.

A: The current model shipping will be the Servo 120a. This unit has rack ears built in where the 120 had them included in the packaging. Our web team is aware of this and the product page should be updated shortly.

Q: 3. does this unit plat SACD Discs?

A: The Audiolab Omnia Stereo 100W Network Amplifier and CD Player does not play Super Audio CD (SACD).

Q: 4. Shall we equalize the sounds with low, medium and high frequencies?

A: The Audiolab 6000A does not have EQ controls.

Q: 5. usually, you can bridge any amp to use in a mono setting. Can you run this mono?

A: This amp is designed to be used as a stereo amp. It doesn't have any options for bridging.

Q: 6. Can this be powered by Ac input 220v?

A: This device 120V AC/60Hz only.

Q: 7. Does the FA 125.2 have tone controls?

A: The Ashly FA-125.2 2-Channel Installation Amplifier does not feature EQ or tone controls.

Q: 8. If your amplifier is CE certified can I get testimony from you to that effect?

A: You can find Ashly's certifications by following the link below, and clicking on the 'features' tab. https://ashly.com/tra-convection-cooled/

Q: 9. Does the Marantz stereo power amplifier has a midrange sound control?

A: This power amp does not have tone control. A preamp would be paired with this amp, and provide for tone control.

Q: 10. Can you connect a subwoofer to this amp?

A: No

CroRam711	06/09/2024
[27 lb] Perfect, easy integration with my SR6011 and definitely opened up my Vienna Acoustics Mozarts, which already sounded very nice but soundstage, detail and bass noticeably came alive after adding the MM7025. It’s a quality piece that performs as advertised. I’m a fan and my only hesitation is wondering if I should have gone with the 7055 to let the rest of my main surround setup have 5 channels of clean power goodness. But I think this definitely covers the most critical ground and gives the 6011 some breathing room to handle center, surround, atmos and outdoor speaker duty. Amp and system runs cool with these speakers at 85 db+ listening (fan hasn’t kicked on that I’ve noticed) but will add cooling as needed or if my new Reserve R600s prove to be a bit less efficient. All in all, highly recommended. 5

Kolton	26/06/2024
[27 lb] Great, works as expected. 5

Carlos J	24/06/2024
[19 x 16 x 4"] The MM7025 replaced a vintage power amplifier and gave new life to my dedicated stereo system. I have both analogue and digital sources, a PrimaLuna tubed preamplifier and B&W 702 S2 floor standing speakers, and this Marantz has proved to be a fundamental link in this chain. It leans a little to the warm side (which I like) and improved the sound of my speakers, with tight bass, very sweet highs, and transparent voices. At this prices level, I can't imagine anything better. 100% recommended. 5

anyonymous	15/05/2024
[19 x 16 x 4"] i use this mixer for several years, live sound and recording. the preamps are clear, full and detailed. by far the best preamps for the dollar i have ever heart. 5

TravisH	08/04/2024
[27 lb] I use this product in our committee rooms, legislative house, and senate chambers. It is very easy to add and network together for the perfect control. It would be nice to have a web connect feature for internet remote access control (hint, hint). 5

Scott	07/04/2024
[27 lb] Matches with my Marantz Sr5015 perfectly. Can notice a difference with 2 channel stereo music. Super fast cross country shipping. Thanks B&H 5

Mark	06/04/2024
[27 lb] First of all B&H delivered this product very promptly, THANKS to B&H!! I originally wanted the MM 7055 power amp with 5 speaker channels. That model seemed to be on back order. Instead, I decided to give the MM 7025 a try. The MM 7025 delivers plenty of power to my two Def Tech Floor speakers, sounds absolutely amazing, and runs cool. I am very pleased so far, great product !! 5