Wooden Camera Micro Battery Slide Pro For Bmpcc 6K Pro Gold Mount

Wooden Camera Micro Battery Slide Pro For Bmpcc 6k Pro Gold Mount

Product Code: eq92332
Availability: In Stock

$1,197.00 $1,532.16

Qty

11 reviews Write a review

Description
Reviews (11)

Add a professional, high-capacity battery plate to power your Blackmagic Pocket Cinema Camera 6K Pro rig with this compact Wooden Camera Micro Battery Slide Pro for BMPCC 6K Pro Gold Mountfrom Wooden Camera. It supports one Gold mount battery while leaving access to the camera's standard battery compartment, and it powers the camera using a 2-pin LEMO-type connector cable. With the camera's L-series battery in place, hot swapping is supported.

The battery slide mounts onto optional 15mm rods using its integrated 15mm LWS rod clamp. It also features two 5.8V D-Tap outputs for powering accessories. Each D-Tap accessory output features a digital fuse that monitors the D-Tap port and disables it if it exceeds the set current for accessories, leaving the camera running without interruption. Once the load has been reduced by removing accessories, a reset button can be pressed to enable accessory power again.

Supports Gold Mount Battery Mounts onto Optional 15mm LWS Rods Power Camera with 2-Pin LEMO-Type Cable Can Hot Swap with Camera Battery Provides 14V Power to Camera 2 x 5.8A D-Tap Accessory Outputs Protective Digital Accessory Fuse

Key Specs
Power Output	D-Tap: VDC at 5.8 A
Camera Power Method	Connector
Plate Front / Battery Mount	Gold Mount
Hot-Swap Support	Yes
Power
Power Output	D-Tap: VDC at 5.8 A
General
Camera Power Method	Connector
Inputs/Outputs	1x LEMO 2-Pin 2x D-Tap
Plate Front / Battery Mount	Gold Mount
Plate Rear Mount	15 mm Rod Clamp
Number of Battery Bays	1
Hot-Swap Support	Yes
Dimensions	5.7 x 4.5 x 1.6" / 14.5 x 11.5 x 4 cm
Weight	11.1 oz / 315 g
Packaging Info
Package Weight	1.09 lb
Box Dimensions (LxWxH)	6.5 x 4.3 x 4.3"

Blackmagic Pocket Cinema Camera 6K Pro
Gold mount battery

Related Questions and Answers

Q: 1. Is there any chance to use this with a c70 (with the a different power cable)?

A: Yes, The Wooden Camera Micro Battery Slide Pro for Blackmagic Pocket Cinema Camera 6K Pro would support the Canon C70 as well by adding this optional power cable https://bhpho.to/35PJ4Yt

Q: 2. Is this the same model that was used for the Sony FS7?

A: The Wooden Camera Battery Slide Pro V-Mount for Sony FX9 is only designed to work with the Sony FX9.

Q: 3. When the V-mount battery dies during a take, the power sauce will be swapped to the BP-U battery seamlessly if it's in place?

A: The Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount) acts as an AC adapter when in use and you cannot use BP-U batteries to hot-swap. For hot-swapping VMount batteries a sharkfin adapter is your best option.

Q: 4. Does the battery indicator in viewfinder work with this V-mount adapter?

A: no it will not work with the battery indicator because it is being powered through the AC port. It will give you the low voltage warning

Q: 5. Does it come with the cable to plug to the camera?

A: Yes, the cable is included.

Q: 6. What extra pieces will I need to convert this to a 15mm rod setup?

A: The Wooden Camera Battery Slide Pro V-Mount for Sony FX9 would not be able to be converted to a 15mm rod setup.

Q: 7. Can you use this with normal size gold mount (for example a Titon 98W) and is there any downside?

A: Yes, you can use the Wooden Camera Micro Battery Slide with normal size Gold mount batteries. There are no downsides.

Q: 8. What voltage is provided to the camera? In a number, please. Not just "the correct voltage".

A: The regulated voltage output of the Wooden Camera Battery Slide Pro for Canon C70 (Gold Mount) is 19.5 volts.

Q: 9. Weight of this please?

A: This should weight right around 1 pound.

Q: 10. Would this work with the BS1H full frame version of the camera? Or are they different power requirements? Thanks.

A: Yes, the Wooden Camera Micro Battery Slide Pro for Panasonic BGH1 will also support the full frame BS1H Cinema camera as well.

Scott	23/09/2024
[1] Wooden camera has been breaking my bank for over 10 years. However, this is a much-needed piece of gear and extremely well made. 5

Peter	03/09/2024
[Yes] Highly recommend this. Adds multiple D-taps and converts to AB mount from V mount. 5

Tom	28/08/2024
[Connector] Solid and Useful Battery Plate from Wooden Camera but note that the web listing currently has a 3-Pin LEMO Output when in fact it has a 2-Pin LEMO Output. 5

David	06/08/2024
[Yes] love powering my power thirsty FX9 and monitor with this bad boy 5

Timothy	29/07/2024
[1] Loving this so far. Feels very secure, easy to readjust, and plenty of D-tap ports. 5

Charles	17/07/2024
[1.09 lb] It's been a while that I'm looking for an adapter plate to use my gold-mount batteries on my camera that has a v-mount plate. There's a couple options that are cheaper, but hey, buy cheap buy twice! This adapter plate is very well-made with quality components and you can be sure that there will be no electrical shorts or bugs with this one. Personally, I prefer buying this brand than a 100$ plastic adapter that won't last the long run. Very happy with this product. 5

Benjamin	15/07/2024
[Connector] Excellent gold mount adaptor for my Sony FX9 5

Ed	28/06/2024
[1] Love how this plate gives you the ability to adjust the height and angle of lean for your v-mount battery. The additional d-tap on the plate is also super handy. Overall, exactly what I've looking for. 5

Ryan	23/06/2024
[Yes] This thing is a great fit for the FX6. It provides easy access to the camera's battery compartment and also allows you to power the camera directly via your Anton Bauer battery. The fact that it mounts directly to the back of the camera allows you to avoid running rails out the back of the base. 5

Craig	04/06/2024
[Gold Mount] This is a bit pricey, but it is well designed and well made. I bought it because I wanted access to the internal battery. 5