Anton Bauer Micro Battery Slide Pro Sony Fx6 Gold Mount

Product Code: eq92360
Availability: In Stock

$1,347.30 $2,034.42

Qty

17 reviews Write a review

Description
Reviews (17)

Power your Sony FX6 via a Gold mount battery with the Anton/Bauer Micro Battery Slide Pro, which steps up the output voltage of your Gold mount battery to the 19.5 VDC required to power your camera via its DC input power port. The battery bracket supports standard- and micro-sized batteries, and it attaches directly to the extension unit connector on the top of your camera, which provides an anchor point for compact and secure connection of the plate to the camera without requiring you to mount it on support rods.

The attachment point also acts as a hinge for the plate, allowing you to access the camera's BPU battery slot, allowing you to hot-swap Gold mount batteries, and change the Gold mount or BPU battery without turning off the camera. Each of the two P-Tap connectors provides unregulated power output from your Gold mount battery for powering accessories, and multiple 1/4"-20 mounting holes allow you to attach accessories directly to the plate.

19.5 VDC Output via DC Connector Mounts Directly on Sony FX6 For Standard- and Micro-Sized Batteries Allows Access to BPU Battery Compartment 2 x P-Taps for Powering Accessories 1/4"-20 Accessory Mounting Holes

Key Specs
Power Output	D-Tap: VDC
Camera Power Method	Connector
Plate Front / Battery Mount	Gold Mount
Hot-Swap Support	Yes
Power
Power Output	D-Tap: VDC
General
Camera Power Method	Connector
Inputs/Outputs	1x Barrel Connector
Plate Front / Battery Mount	Gold Mount
Number of Battery Bays	1
Accessory Mounting	1/4"-20 Female
Hot-Swap Support	Yes
Weight	1 lb / 0.5 kg
Packaging Info
Package Weight	0.73 lb
Box Dimensions (LxWxH)	9.1 x 5.1 x 4.15"

The quick-hinge design retains access to the camera's internal BPU battery compartment, allowing continuous shooting by hot-swapping internal and external batteries

The Battery Slide Pro plate steps up the output of a 14.4V battery to the required 19.5 VDC to power your camera via its DC-in port

The lightweight plate is small in size, for a small footprint when mounted on your camera, but it supports both standard- and micro-sized Gold mount batteries

Related Questions and Answers

Q: 1. Do they make one for the Sony FX9?

A: There is the Dual Micro Bracket for Sony FX9 from Anton Bauer. https://www.bhphotovideo.com/c/product/1627027-REG/anton_bauer_8375_0243_fx9_bracket_gm.html

Q: 2. What 3 pin LEMO cables can be used with this?

A: A great solution to consider for 3-pin LEMO cables for use with the Wooden Camera Micro Battery Slide Pro (Micro Gold Mount) is to make custom cable using the power cable customizer from Wooden Camera. See the link below: https://bhpho.to/3NNzPMd

Q: 3. Weight of this please?

A: This should weight right around 1 pound.

Q: 4. When the V-mount battery dies during a take, the power sauce will be swapped to the BP-U battery seamlessly if it's in place?

A: The Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount) acts as an AC adapter when in use and you cannot use BP-U batteries to hot-swap. For hot-swapping VMount batteries a sharkfin adapter is your best option.

Q: 5. Is this RED approved like the Core SWX battery plate?

A: it isn't currently listed on the RED approved accessories list

Q: 6. Will this also work with FX9?

A: No, the Wooden Camera Battery Slide Pro for Sony FX6 (V-Mount) does not have the appropriate mounting for the Sony PXW-FX9 XDCAM 6K Full-Frame Camera System (Body Only). The Wooden Camera Battery Slide Pro V-Mount for Sony FX9 is an appropriate plate. See the link below: https://bhpho.to/2DHqzEt

Q: 7. can it handle 4 144Wh Anton Bauer Digital Series 150?

A: Yes, Anton Bauer GM4 charger would work and charge the Anton Bauer Digital 150 battery. It would support up to four batteries.

Q: 8. Can you use the HDMI port or does this block it?

A: The Anton/Bauer Micro Battery Slide Pro for Sony FX6 would not block any of the cameras video output ports.

Q: 9. I lost the screws for this piece of equipment. Where can I find replacements?

A: We recommend connecting with Anton Bauer support for the replacement screws. salessupport_USA@vitecgroup.com

Q: 10. Hi does this take all kinds of v mount batteries? Or a certain few (i.e. Indie Pro & Anton Bauer)? Thanks.

A: Yes, this will take batteries other than Anton Bauer.

Larry	13/09/2024
[D-Tap: VDC ] I appreciate the two P-Tap ports and the ARRI-style receptacle was a useful bonus. I attached a SmallRig ballhead for a field monitor and cable management was easy to use one of the P-Taps to dummy battery on the field monitor. 5

Brad	03/09/2024
[Yes] There are a number of uses for this plate. I purchased my first one 15yrs ago and have never had a problem. 5

Curtis	01/09/2024
[1] Anton Bauer batteries and accessories have not failed me yet, but there's a fairly steep up-front cost to pay. This plate is plastic. It's decent plastic, but for the price, I was a little surprised that it wasn't something a little more robust. In any case, it works well attached to my Zacuto Zwiss plate v.2 and powers my rig through an entire production day without issue with the Digital 150 AB battery. 5

Amilcar	07/08/2024
[Gold Mount] The brand kind of speaks for itself. Always works and costs the same as new cheap alternatives. 5

Timothy	06/08/2024
[Yes] Loving this so far. Feels very secure, easy to readjust, and plenty of D-tap ports. 5

Yuanju	04/08/2024
[Yes] This is an absolutely fantastic V-lock battery plate. Fit perfectly on my Sony FX6 and works like a charm with any V- lock battery. Stays out of the way of the original Sony battery so you can have both. Highly recommend to anyone. B&H shipped quickly and on time even all the way to Taiwan. Thank you guys. 5

Ryan	04/08/2024
[0.73 lb] This thing is a great fit for the FX6. It provides easy access to the camera's battery compartment and also allows you to power the camera directly via your Anton Bauer battery. The fact that it mounts directly to the back of the camera allows you to avoid running rails out the back of the base. 5

Devon	03/08/2024
[Gold Mount] Itsy bitsy teeny weeny camera power juice machiney. 5

Christine	01/08/2024
[Connector] These are my go to batteries. They pack a punch and will power a SmallHD 702 bright for 6 hours on a steadicam. The USB outlet comes in handy for so many purposes. I can charge/power an Ambient ACN-CL Lockit on camera or power a small USB 5V portable fan for those really hot days. The Dtap lets me power a Litepanels brick on location for hours. Don't need to say much about Anton Bauer Quality and performance. If you have been in the business for a while you already know. 5

Craig	27/06/2024
[D-Tap: VDC ] This is a bit pricey, but it is well designed and well made. I bought it because I wanted access to the internal battery. 5