Belden 4694R Rg6 12G-Sdi 4K Uhd Cable 1000Ft Red

Belden 4694r Rg6 12g-sdi 4k Uhd Cable 1000ft Red

Product Code: eq92446
Availability: In Stock

$3,756.00 $4,807.68

Qty

11 reviews Write a review

Description
Reviews (11)

Designed with a red outer jacket and delivered on a reel, the 1000' Belden 4694R RG6 12G-SDI 4K UHD Cable 1000ft Redfrom Belden 4694R RG6 12G-SDI 4K UHD Cable 1000ft Redis suitable for indoor and UV-resistant applications with single-link UHD 4K, quad-link 8K, and 1080p HD-SDI signals. The 75-ohm RG6 coax cable features an 18 AWG solid silvered copper conductor, PE insulation, foil + 95% tinned copper braid shield, and a PVC jacket.

Indoor /Indoor Riser/UV-Resistant Cable Single-Link 4K, Quad-Link 8K, 1080p SDI Solid Silvered Copper Conductor PE Insulation Foil + 95% Tinned Copper Braid Shield PVC Jacket Tri-Laminate Outer Shield 69 lb Max Pull Tension

Parameters
Type	RG6 Coax
Conductor	18 AWG Solid Stranding Silvered Coppered (SC) 0.04" / 0.1 cm Nominal Diameter
Insulation	Polyethylene (Foam) 0.18" / 0.46 cm Nominal Diameter
Outer Shield	Tape: Tri-Laminate (Aluminum/Poly/Aluminum) Duobond II 100% Coverage Braid: Tinned Copper (TC) 95% Coverage
Outer Jacket	Polyvinyl Chloride 0.274" / 0.7 cm Nominal Diameter
Return Loss	5-1600 MHz: 23 dB 1600-4500 MHz: 21 dB 4500-12000 MHz: 15 dB
Attenuation	1 MHz: 0.23 dB per 100' / 30.5 m 3.58 MHz: 0.44 dB per 100' / 30.5 m 5 MHz: 0.51 dB per 100' / 30.5 m 6 MHz: 0.56 dB per 100' / 30.5 m 7 MHz: 0.59 dB per 100' / 30.5 m 10 MHz: 0.70 dB per 100' / 30.5 m 12 MHz: 0.75 dB per 100' / 30.5 m 25 MHz: 1.04 dB per 100' / 30.5 m 55 MHz: 1.45 dB per 100' / 30.5 m 67.5 MHz: 1.58 dB per 100' / 30.5 m 71.5 MHz: 1.62 dB per 100' / 30.5 m 88.5 MHz: 1.78 dB per 100' / 30.5 m 100 MHz: 1.89 dB per 100' / 30.5 m 135 MHz: 2.10 dB per 100' / 30.5 m 143 MHz: 2.16 dB per 100' / 30.5 m 180 MHz: 2.44 dB per 100' / 30.5 m 270 MHz: 2.97 dB per 100' / 30.5 m 360 MHz: 3.45 dB per 100' / 30.5 m 540 MHz: 4.30 dB per 100' / 30.5 m 720 MHz: 5.00 dB per 100' / 30.5 m 750 MHz: 5.10 dB per 100' / 30.5 m 1000 MHz: 5.90 dB per 100' / 30.5 m 1500 MHz: 7.30 dB per 100' / 30.5 m 2000 MHz: 8.50 dB per 100' / 30.5 m 2250 MHz: 9.10 dB per 100' / 30.5 m 3000 MHz: 10.6 dB per 100' / 30.5 m 4500 MHz: 13.2 dB per 100' / 30.5 m 6000 MHz: 15.5 dB per 100' / 30.5 m 12000 MHz: 23.0 dB per 100' / 30.5 m
Electrical	Nominal Conductor DCR: 6.4 Ohms per 1000' / 305 m Nominal Outer Shield DCR: 2.8 Ohms per 1000' / 305 m Nominal Capacitance Cond-to-Shield: 15.9 pF/ft Nominal Impedance: 75 Ohms Nominal Velocity: 85%
UL Voltage	300 V (CMR, CMG)
UL Rating	140°F / 60°C
Operating Temperature	-4 to 167°F / -20 to 75°C
Bend Radius	2.75" / 7 cm
Bulk Cable Weight	41 lb / 18.6 kg per 1000' / 305 m
Maximum Pull Tension	69 lb / 31.3 kg
Environment	Indoor, Indoor Riser, UV Resistance
Sustainability	CA Prop 65
Flammability/Fire Resistance	UL1666 Vertical Shaft, FT4
NEC/UL Compliance	CMR
CEC/C(UL) Compliance	CMG
European Directive Compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 Amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC Compliance	China RoHS II (GB/T 26572-2011)
Plenum Number	4694P

Related Questions and Answers

Q: 1. When this is in encode mode, how many channels of audio can be converted from the source input to NDI?

A: The SCIENCE IMAGE Bi-Directional 4K SDI/HDMI Full NDI Encoder/Decoder (B&H# SCSTUDIO4KSH) can accept a two-channel 3.5mm line in for embedding.

Q: 2. I see UDP protocol, is this VISCA over UDP?

A: No it is not. Here is the list of control protocols listed in Marshall's manual DHCP, DNS, HTTP, HTTPS, IPv4, UDP, NDI. VISCA is not mentioned once in the manual therefore it is safe to say the camera can not accept VISCA over UDP.

Q: 3. can this work with a mac pro mid 2010 with Mojave 10.14.6 installed?

A: This Blackmagic Design Decklink Quad 3G-SDI Mezzanine Card for Decklink 4K Extreme 12G is an add-on card for the DeckLink 4K Extreme 12G capture card. This mezzanine card won't work by itself but when added to a DeckLink 4K Extreme 12G card it should work on a MacPro Mid 2010 on Mojave if you have the right driver version installed.

Q: 4. can this be installed into a macbook pro?

A: This cannot be installed in a Macbook Pro.

Q: 5. Is this a 10bit panel?

A: Yes, this is a 10-bit monitor.

Q: 6. What latency in the video stream would this introduce?

A: Latency on NDI hardware, like the SCIENCE IMAGE NDI Bidirectional UHD 4K 12G-SDI/HDMI Encoder/Decoder, is going to entirely depend on how good your internet connection is and how good your end users (viewers) are also.

Q: 7. Can we use this board to capture 4K 2160p60 SDI using 4 cables? Is there any difference in using BMD SDK when 4K SDI connect with single cable or quad cables.

A: Yes, this product will accept a Quad 3G-SDI signal. A Quad 3G-SDI Signal and a 12G-SDI signal ends up in the end as the same signal, it is just a matter of what the gear you are using this in conjunction with offers.

Q: 8. If the unit is receiving a 4k input on HDMI can it convert to 1080 for SDI while also outputting 4k through HDMI out?

A: When using the HDMI input of the SCIENCE IMAGE FLOW 4K 12G-SDI/HDMI Up/Down/Cross Converter converted video would be simultaneously output the converted signal format to both the HDMI and SDI output. It will only process one conversion at a time.

Q: 9. With this card, can I capture more simultaneous inputs with my Decklink 12g?

A: The Blackmagic Design Decklink Quad 3G-SDI Mezzanine Card has inputs and outputs that are 3G-SDI HD 60p BNC connections. It does not allow you to capture extra channels of video.

Q: 10. Does this accept 3G level A and Level B? Any compatibility issues between Black Magic or Barco gear?

A: The Freakshow HD 4K 12G-SDI MSX8-O 1 x 8 Microsplit Reclocking DA does support both Level A and Level B SDI signals. There should be not compatibility issues when using the Freakshow HD 4K 12G-SDI MSX8-O 1 x 8 Microsplit Reclocking DA with other brands like Blackmagic and Barco.

richard	19/08/2024
[RG6 Coax] I love Canare BNC connectors. They are well knurled and easy to rip and turn. The cable quality is the best in the business and the build quality is first rate. What's not to like? 5

Jonathan	08/08/2024
[4694P] This cable pulled easy and the connectivity is rock solid! This is a good brand to trust and use. 5

Luke	12/07/2024
[69 lb / 31.3 kg] The cable is shielded and provides a 12G SDI connection from your camera to your monitor. Buy with confidence. 5

Ryan	09/07/2024
[4694P] Haven't used yet but looks and feels solid. 5

Ryan	08/07/2024
[CMR] Haven't used it yet but nice build quality 5

Awaken	16/06/2024
[2.75" / 7 cm] We've been using this to provide a direct feed to monitor from our RED Komodo when mounted to our vehicle rig and so far it's working exactly as it should. Have yet to try in Canadian cold winters but time will tell how it holds up in minus temperatures. Another positive is the flexibility of the cable itself in that it's not too rigid interfering with the gimbal motors. 5

Kerrin	15/06/2024
[CMR] Had a few of these cables for a couple years now that I use with my live-streaming rig...They have all stood up to the abuse of the road. 5