Belden 4694R Rg6 12G-Sdi 4K Uhd Cable 1000Ft Violet

Belden 4694r Rg6 12g-sdi 4k Uhd Cable 1000ft Violet

Product Code: eq92447
Availability: In Stock

$3,756.00 $5,821.80

Qty

18 reviews Write a review

Description
Reviews (18)

Designed with a violet outer jacket and delivered on a reel, the 1000' Belden 4694R RG6 12G-SDI 4K UHD Cable 1000ft Violetfrom Belden 4694R RG6 12G-SDI 4K UHD Cable 1000ft Violetis suitable for indoor and UV-resistant applications with single-link UHD 4K, quad-link 8K, and 1080p HD-SDI signals. The 75-ohm RG6 coax cable features an 18 AWG solid silvered copper conductor, PE insulation, foil + 95% tinned copper braid shield, and a PVC jacket.

Indoor /Indoor Riser/UV-Resistant Cable Single-Link 4K, Quad-Link 8K, 1080p SDI Solid Silvered Copper Conductor PE Insulation Foil + 95% Tinned Copper Braid Shield PVC Jacket Tri-Laminate Outer Shield 69 lb Max Pull Tension

Parameters
Type	RG6 Coax
Conductor	18 AWG Solid Stranding Silvered Coppered (SC) 0.04" / 0.1 cm Nominal Diameter
Insulation	Polyethylene (Foam) 0.18" / 0.46 cm Nominal Diameter
Outer Shield	Tape: Tri-Laminate (Aluminum/Poly/Aluminum) Duobond II 100% Coverage Braid: Tinned Copper (TC) 95% Coverage
Outer Jacket	Polyvinyl Chloride 0.274" / 0.7 cm Nominal Diameter
Return Loss	5-1600 MHz: 23 dB 1600-4500 MHz: 21 dB 4500-12000 MHz: 15 dB
Attenuation	1 MHz: 0.23 dB per 100' / 30.5 m 3.58 MHz: 0.44 dB per 100' / 30.5 m 5 MHz: 0.51 dB per 100' / 30.5 m 6 MHz: 0.56 dB per 100' / 30.5 m 7 MHz: 0.59 dB per 100' / 30.5 m 10 MHz: 0.70 dB per 100' / 30.5 m 12 MHz: 0.75 dB per 100' / 30.5 m 25 MHz: 1.04 dB per 100' / 30.5 m 55 MHz: 1.45 dB per 100' / 30.5 m 67.5 MHz: 1.58 dB per 100' / 30.5 m 71.5 MHz: 1.62 dB per 100' / 30.5 m 88.5 MHz: 1.78 dB per 100' / 30.5 m 100 MHz: 1.89 dB per 100' / 30.5 m 135 MHz: 2.10 dB per 100' / 30.5 m 143 MHz: 2.16 dB per 100' / 30.5 m 180 MHz: 2.44 dB per 100' / 30.5 m 270 MHz: 2.97 dB per 100' / 30.5 m 360 MHz: 3.45 dB per 100' / 30.5 m 540 MHz: 4.30 dB per 100' / 30.5 m 720 MHz: 5.00 dB per 100' / 30.5 m 750 MHz: 5.10 dB per 100' / 30.5 m 1000 MHz: 5.90 dB per 100' / 30.5 m 1500 MHz: 7.30 dB per 100' / 30.5 m 2000 MHz: 8.50 dB per 100' / 30.5 m 2250 MHz: 9.10 dB per 100' / 30.5 m 3000 MHz: 10.6 dB per 100' / 30.5 m 4500 MHz: 13.2 dB per 100' / 30.5 m 6000 MHz: 15.5 dB per 100' / 30.5 m 12000 MHz: 23.0 dB per 100' / 30.5 m
Electrical	Nominal Conductor DCR: 6.4 Ohms per 1000' / 305 m Nominal Outer Shield DCR: 2.8 Ohms per 1000' / 305 m Nominal Capacitance Cond-to-Shield: 15.9 pF/ft Nominal Impedance: 75 Ohms Nominal Velocity: 85%
UL Voltage	300 V (CMR, CMG)
UL Rating	140°F / 60°C
Operating Temperature	-4 to 167°F / -20 to 75°C
Bend Radius	2.75" / 7 cm
Bulk Cable Weight	41 lb / 18.6 kg per 1000' / 305 m
Maximum Pull Tension	69 lb / 31.3 kg
Environment	Indoor, Indoor Riser, UV Resistance
Sustainability	CA Prop 65
Flammability/Fire Resistance	UL1666 Vertical Shaft, FT4
NEC/UL Compliance	CMR
CEC/C(UL) Compliance	CMG
European Directive Compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 Amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC Compliance	China RoHS II (GB/T 26572-2011)
Plenum Number	4694P
Packaging Info
Package Weight	44.75 lb
Box Dimensions (LxWxH)	14.5 x 14.5 x 10.5"

Related Questions and Answers

Q: 1. what th type of shutter it have? What the name/model of sensor it use?

A: This is a CMOS sensor and has a rolling shutter

Q: 2. If the unit is receiving a 4k input on HDMI can it convert to 1080 for SDI while also outputting 4k through HDMI out?

A: When using the HDMI input of the SCIENCE IMAGE FLOW 4K 12G-SDI/HDMI Up/Down/Cross Converter converted video would be simultaneously output the converted signal format to both the HDMI and SDI output. It will only process one conversion at a time.

Q: 3. What is the throughput latency with an active conversion?

A: Unfortunately, SCIENCE IMAGE does not provide latency info for the SCIENCE IMAGE FLOW 4K

Q: 4. When this is in encode mode, how many channels of audio can be converted from the source input to NDI?

A: The SCIENCE IMAGE Bi-Directional 4K SDI/HDMI Full NDI Encoder/Decoder (B&H# SCSTUDIO4KSH) can accept a two-channel 3.5mm line in for embedding.

Q: 5. Is this a 10bit panel?

A: Yes, this is a 10-bit monitor.

Q: 6. I see UDP protocol, is this VISCA over UDP?

A: No it is not. Here is the list of control protocols listed in Marshall's manual DHCP, DNS, HTTP, HTTPS, IPv4, UDP, NDI. VISCA is not mentioned once in the manual therefore it is safe to say the camera can not accept VISCA over UDP.

Q: 7. Can the HDMI Output be used as a loopout of the HDMI Input?

A: Yes, the HDMI out of the SCIENCE IMAGE NDI Bidirectional UHD 4K 12G-SDI/HDMI Encoder/Decoder can be used as a loop out of the HDMI in.

Q: 8. what are the dimensions of the camera itself?

A: This camera is 6 x 3.1 x 3.4 inches.

Q: 9. can this add two dedicated 4K or HD outputs?

A: Hey there! Is there any connection (with cable) between the 2 plates or is it just a matter of replacing and screwing? What is the advantage of the SDI QUAD card if it does not add any input? Thanks!

Q: 10. What latency in the video stream would this introduce?

A: Latency on NDI hardware, like the SCIENCE IMAGE NDI Bidirectional UHD 4K 12G-SDI/HDMI Encoder/Decoder, is going to entirely depend on how good your internet connection is and how good your end users (viewers) are also.

Ryan	12/09/2024
[CMG] Haven't used it yet but nice build quality 5

Jonathan	27/08/2024
[CA Prop 65] This cable pulled easy and the connectivity is rock solid! This is a good brand to trust and use. 5

Matthew	03/08/2024
[CMG] I use these with my Ninja V recorders. They have not let me down and are easy to pack in my kit. 5

Ryan	27/07/2024
[CMR] Haven't used yet but looks and feels solid. 5

richard	24/07/2024
[4694P] There just isn't a better quality video cable than Canare. I love their BNC connectors and the build quality is absolutely first rate. It's a great cable! 5

Gordon	23/07/2024
[CMR] I originally purchased this cable to complete a PTZ camera install at the church I attend. I was able to install 4 Sony cameras and connect them to a BlackMagicDesign ATEM. Utilizing this cable and Belden SDI connectors we were able to make this job flawless in a minimum amount of time. I've recently purchased my second roll to outfit our 4 projectors with updated connections. 5

Emilija	06/07/2024
[CA Prop 65] It's really surprising that your company has everything that is needed and what is advanced .... 5

Awaken	04/07/2024
[CA Prop 65] We've been using this to provide a direct feed to monitor from our RED Komodo when mounted to our vehicle rig and so far it's working exactly as it should. Have yet to try in Canadian cold winters but time will tell how it holds up in minus temperatures. Another positive is the flexibility of the cable itself in that it's not too rigid interfering with the gimbal motors. 5

Eloho	24/06/2024
[CMR] great cable... solved all my hd live coverage cable tenth problems. I was able to run over 250ft from HD-SDI camera to mixer with no hitches. 5

Jim	18/06/2024
[69 lb / 31.3 kg] I bought this cable after talking to a sales person that told me it doesn't have foot markings on the cable. I was pleasantly surprised to find foot markings on it when I received it. 5