Belden 4694R Rg6 12G-Sdi 4K Uhd Cable 1000' Yellow

Belden 4694r Rg6 12g-sdi 4k Uhd Cable 1000' Yellow

Product Code: eq92449
Availability: In Stock

$3,756.00 $5,671.56

Qty

15 reviews Write a review

Description
Reviews (15)

Designed with a yellow outer jacket and delivered on a reel, the 1000' Belden 4694R RG6 12G-SDI 4K UHD Cable 1000' Yellowfrom Belden 4694R RG6 12G-SDI 4K UHD Cable 1000' Yellowis suitable for indoor and UV-resistant applications with single-link UHD 4K, quad-link 8K, and 1080p HD-SDI signals. The 75-ohm RG6 coax cable features an 18 AWG solid silvered copper conductor, PE insulation, foil + 95% tinned copper braid shield, and a PVC jacket.

Indoor /Indoor Riser/UV-Resistant Cable Single-Link 4K, Quad-Link 8K, 1080p SDI Solid Silvered Copper Conductor PE Insulation Foil + 95% Tinned Copper Braid Shield PVC Jacket Tri-Laminate Outer Shield 69 lb Max Pull Tension

Parameters
Type	RG6 Coax
Conductor	18 AWG Solid Stranding Silvered Coppered (SC) 0.04" / 0.1 cm Nominal Diameter
Insulation	Polyethylene (Foam) 0.18" / 0.46 cm Nominal Diameter
Outer Shield	Tape: Tri-Laminate (Aluminum/Poly/Aluminum) Duobond II 100% Coverage Braid: Tinned Copper (TC) 95% Coverage
Outer Jacket	Polyvinyl Chloride 0.274" / 0.7 cm Nominal Diameter
Return Loss	5-1600 MHz: 23 dB 1600-4500 MHz: 21 dB 4500-12000 MHz: 15 dB
Attenuation	1 MHz: 0.23 dB per 100' / 30.5 m 3.58 MHz: 0.44 dB per 100' / 30.5 m 5 MHz: 0.51 dB per 100' / 30.5 m 6 MHz: 0.56 dB per 100' / 30.5 m 7 MHz: 0.59 dB per 100' / 30.5 m 10 MHz: 0.70 dB per 100' / 30.5 m 12 MHz: 0.75 dB per 100' / 30.5 m 25 MHz: 1.04 dB per 100' / 30.5 m 55 MHz: 1.45 dB per 100' / 30.5 m 67.5 MHz: 1.58 dB per 100' / 30.5 m 71.5 MHz: 1.62 dB per 100' / 30.5 m 88.5 MHz: 1.78 dB per 100' / 30.5 m 100 MHz: 1.89 dB per 100' / 30.5 m 135 MHz: 2.10 dB per 100' / 30.5 m 143 MHz: 2.16 dB per 100' / 30.5 m 180 MHz: 2.44 dB per 100' / 30.5 m 270 MHz: 2.97 dB per 100' / 30.5 m 360 MHz: 3.45 dB per 100' / 30.5 m 540 MHz: 4.30 dB per 100' / 30.5 m 720 MHz: 5.00 dB per 100' / 30.5 m 750 MHz: 5.10 dB per 100' / 30.5 m 1000 MHz: 5.90 dB per 100' / 30.5 m 1500 MHz: 7.30 dB per 100' / 30.5 m 2000 MHz: 8.50 dB per 100' / 30.5 m 2250 MHz: 9.10 dB per 100' / 30.5 m 3000 MHz: 10.6 dB per 100' / 30.5 m 4500 MHz: 13.2 dB per 100' / 30.5 m 6000 MHz: 15.5 dB per 100' / 30.5 m 12000 MHz: 23.0 dB per 100' / 30.5 m
Electrical	Nominal Conductor DCR: 6.4 Ohms per 1000' / 305 m Nominal Outer Shield DCR: 2.8 Ohms per 1000' / 305 m Nominal Capacitance Cond-to-Shield: 15.9 pF/ft Nominal Impedance: 75 Ohms Nominal Velocity: 85%
UL Voltage	300 V (CMR, CMG)
UL Rating	140°F / 60°C
Operating Temperature	-4 to 167°F / -20 to 75°C
Bend Radius	2.75" / 7 cm
Bulk Cable Weight	41 lb / 18.6 kg per 1000' / 305 m
Maximum Pull Tension	69 lb / 31.3 kg
Environment	Indoor, Indoor Riser, UV Resistance
Sustainability	CA Prop 65
Flammability/Fire Resistance	UL1666 Vertical Shaft, FT4
NEC/UL Compliance	CMR
CEC/C(UL) Compliance	CMG
European Directive Compliance	EU CE Mark, EU Directive 2015/863/EU (RoHS 2 Amendment), EU Directive 2011/65/EU (RoHS 2), EU Directive 2012/19/EU (WEEE)
APAC Compliance	China RoHS II (GB/T 26572-2011)
Plenum Number	4694P

Related Questions and Answers

Q: 1. what th type of shutter it have? What the name/model of sensor it use?

A: This is a CMOS sensor and has a rolling shutter

Q: 2. Can the HDMI Output be used as a loopout of the HDMI Input?

A: Yes, the HDMI out of the SCIENCE IMAGE NDI Bidirectional UHD 4K 12G-SDI/HDMI Encoder/Decoder can be used as a loop out of the HDMI in.

Q: 3. Is this a 10bit panel?

A: Yes, this is a 10-bit monitor.

Q: 4. If the unit is receiving a 4k input on HDMI can it convert to 1080 for SDI while also outputting 4k through HDMI out?

A: When using the HDMI input of the SCIENCE IMAGE FLOW 4K 12G-SDI/HDMI Up/Down/Cross Converter converted video would be simultaneously output the converted signal format to both the HDMI and SDI output. It will only process one conversion at a time.

Q: 5. What is the SFP+ port for? Does this unit send/receive 12g over fiber or is this data only?

A: The SFP port on the SCIENCE IMAGE FLOW 4K 12G-SDI/HDMI Up/Down/Cross Converter is used for fiber handling of 12g.

Q: 6. If the unit is receiving a 4k HDMI input, can it convert to 1080 over SDI while simultaneously outputting 4k HDMI out?

A: The SCIENCE IMAGE FLOW 4K 12G-SDI/HDMI Up/Down/Cross Converter can only perform one conversion at a time.

Q: 7. Can we use this board to capture 4K 2160p60 SDI using 4 cables? Is there any difference in using BMD SDK when 4K SDI connect with single cable or quad cables.

A: Yes, this product will accept a Quad 3G-SDI signal. A Quad 3G-SDI Signal and a 12G-SDI signal ends up in the end as the same signal, it is just a matter of what the gear you are using this in conjunction with offers.

Q: 8. When this is in encode mode, how many channels of audio can be converted from the source input to NDI?

A: The SCIENCE IMAGE Bi-Directional 4K SDI/HDMI Full NDI Encoder/Decoder (B&H# SCSTUDIO4KSH) can accept a two-channel 3.5mm line in for embedding.

Q: 9. what are the dimensions of the camera itself?

A: This camera is 6 x 3.1 x 3.4 inches.

Q: 10. What is the throughput latency with an active conversion?

A: Unfortunately, SCIENCE IMAGE does not provide latency info for the SCIENCE IMAGE FLOW 4K

Chris	25/09/2024
[2.75" / 7 cm] Great wire and the rolls are affordable. 5

Jonathan	17/09/2024
[2.75" / 7 cm] This cable pulled easy and the connectivity is rock solid! This is a good brand to trust and use. 5

Kerrin	17/09/2024
[CMG] Had a few of these cables for a couple years now that I use with my live-streaming rig...They have all stood up to the abuse of the road. 5

anyonymous	09/09/2024
[RG6 Coax] Good cable for long runs of HD video. Good service 5

Ryan	07/09/2024
[69 lb / 31.3 kg] Haven't used it yet but nice build quality 5

Luis	09/08/2024
[2.75" / 7 cm] The cable is thin and does its job. 5

Luke	22/07/2024
[CMG] The cable is shielded and provides a 12G SDI connection from your camera to your monitor. Buy with confidence. 5

Eloho	22/07/2024
[CMG] great cable... solved all my hd live coverage cable tenth problems. I was able to run over 250ft from HD-SDI camera to mixer with no hitches. 5

Matthew	18/07/2024
[CMR] I use these with my Ninja V recorders. They have not let me down and are easy to pack in my kit. 5

Awaken	14/07/2024
[4694P] We've been using this to provide a direct feed to monitor from our RED Komodo when mounted to our vehicle rig and so far it's working exactly as it should. Have yet to try in Canadian cold winters but time will tell how it holds up in minus temperatures. Another positive is the flexibility of the cable itself in that it's not too rigid interfering with the gimbal motors. 5