With its space-saving design, the Low-Profile Right-Angle XLR 3-Pin Male Connector Blue Capis ideal for use on portable recorders and field mixers in audio bags. Its standard cap has a cable outlet that accommodates cabling with diameters up to 3.4mm while offering 120 degrees of adjustment swing around the 3 o'clock and 9 o'clock positions, allowing perfect placement in an array of configurations. This variant features gold pins, a black shell, and a blue cap.

XLR 3-Pin Male    Low-Profile Right-Angle Connector    Accepts Cable Diameters up to 3.4mm    Adjustable Exit at 3 or 9 O'Clock    120° Adjustment Swing for Outlet    Gold Pins    Black Shell

• Low-profile right-angle XLR 3-pin male connector
• A-Shell adjustable multi-angle cable exit (120° around 3 o'clock or 9 o'clock)
• Matte black shell with gold pins

• Standard cap accepts cable diameters up to 3.4mm

• Compatible with Cable Techniques low-profile bulk cable and popular slim cable models such as Belden 1804A, Mogami W2901, W3031, W2697, and Sommer Isopod SO-F22

Related Questions and Answers

Q: 1. will this let me connect my rode wireless go II into XLR connections on a mixer to input mics? Fully supported and safe?

A: Yes, the Cable Techniques 3.5mm TRS Right Angle to Two 3-Pin XLR Male Tape Output Y-Cable Adapter for Sound Devices should support the output signal from the receiver in the Rode Wireless GO II System and allow the isolated output of each receiver channel into separate XLR mixer inputs.

Q: 2. Is this compatible with MixPre-10 II?

A: Yes, it is compatible for use with the MixPre-10 II.

Q: 3. Will this fit into a Manfrotto 536 tripod?

A: Yes, it will fit the Manfrotto 536 tripod.

Q: 4. Is this compatible with the Zoom F4?

A: This 4-pin Hirose connector is compatible with the DC power option on the Zoom F4 digital audio recorder.

Q: 5. Can you plug two cables into a C70 without the right angle cables blocking each other?

A: unfortunately you can only use oneKondor Blue Right-Angle Mini-XLR Male to XLR Female Cable for BMPCC 6K Pro & Canon C70 (17") on the topport. If you connect the cable on the lower port it blocks the port above.

Q: 6. Can this be used to go from the XLR outputs on a mixer board to the rode wireless go 2 TX unit inputs

A: I'm sorry, but the Cable Techniques 3.5mm TRS Right Angle to Two 3-Pin XLR Male Tape Output Y-Cable Adapter that you asked about would not allow you to output from a mixer into a wireless transmitter. Most mixers will have XLR male outputs, so you will need female XLR connectors on the cable. Additionally, the Rode Wireless Go II transmitter will only accept input from a mic level source. The cable that I am linking below has the correct gendered connectors, and also has a built in attenuator to lower line level to mic, so that you can successfully send the stereo line signal into the transmitter: https://bhpho.to/3IdRNCf

Q: 7. Is this cable balanced?

A: No, the Cable Techniques CT-MIN-LPUOX-18 is an unbalanced cable.

Q: 8. Can I attach this end on to the Sennheiser DC 2 BH #SEDC2 to be plugged into the BH #BECOCO15VA to be powered off a v-mount battery?

A: This connector can be soldered on to the bare wire end of the cable on the Sennheiser DC 2 and the be connected to the Bebob Factory GmbH COCO-15V III V-Mount Battery Plate.

Q: 9. Will this split a GO 2 receiver into CH1 and CH2 so I can monitor two lavs separately?

A: Yes, the Cable Techniques 3.5mm Right-Angle TRS to Dual Low-Profile TA3M Mini-XLR Y Cable can be used with the RODE Wireless GO II Digital Wireless Microphone System and will split the audio from each transmitter onto separate channels when the receiver is set for stereo mode. Be aware that this cable has TA3 mini-XLR connectors for use with cameras like the Canon EOS C70 or the Blackmagic Pocket Cinema Camera 6K Pro, or other audio devices equipped with mini-XLR mic inputs.

Q: 10. Does this cable fit to RØDELINK FILMMAKER receiver and transmitter output connection 3.5mm TRS Locking Jack Socket ?

A: This cable will work with the Rode Link receiver output.