Built for professional location sound recording applications, the 24" LPS TA5F to Dual XLR3M Y-Cable for Lectrosonics SRc5P SRb5Penables a secure and high-quality connection between a Lectrosonics SRc5P or SRb5P wireless receiver and a field mixer/recorder equipped with XLR inputs. It features three low-profile, right-angle connectors—a locking TA5F mini-XLR on one end and two XLR 3-pin male on the other end—to accommodate configurations in sound bags where space is limited.

The TA5F connector offers 60° of swing while the XLR connectors provide 120° of swing, adjustable from 30 to 150° and 210 to 330°. This ensures that the orientation of the cable outlets can be positioned for compatibility with a variety of mixer/recorder input panels. Due to its slim 2.7mm overall diameter and PUR polyurethane jacket, this cable delivers great flexibility without compromising durability.

Plugs Wireless Receiver into Field Mixer    For Lectrosonics SRc5P or SRb5P Receiver    For Field Mixers with XLR Inputs    Low-Profile Locking TA5F Connector    Dual Low-Profile XLR 3-Pin Male Plugs    Right-Angle Connectors    60° Swing for TA5F Connector    120° Swing for XLR Connectors    Slim 2.7mm OD Cable    Ultraflexible and Durable PUR Jacket

For connecting Lectrosonics SRc5P/SRb5P TA5 receiver outputs into field mixer/recorders like Sound Devices Scorpio, 888, 833, 633, Zaxcom, Zoom, and Tascam

Low-profile LPS locking TA5 female to two low-profile XLR 3-pin male A-shell connectors

Color-coded XLR connectors use blue for channel 1 and red for channel 2

Slim diameter (2.7mm) yet extremely durable cable with an ultraflexible PUR polyurethane jacket material that is crush-, tear-, and cold-resistant

Adjustable right-angle TA5F with a 60° swing

Outlet orientation of the XLR male connectors can be adjusted from 30 to 150° and 210 to 330° to work with many available gear input panels

Related Questions and Answers

Q: 1. I need to replace my antennas, where can I find just those two parts?

A: You can use the Lectrosonics AMJKIT Whip Antenna for UM and SM Beltpacks, SR Receivers (B&H # LEAMJKIT) to replace the antennas for the Lectrosonics SRc Dual-Channel Slot-Mount ENG Receiver. The kit includes cutting template and color caps. You will need two of the antennas.

Q: 2. Is this xlr cable not shielded?

A: The Remote Audio Low-Profile XLR3F to XLR3M Balanced Coiled Jumper Cable is a shielded cable.

Q: 3. What is the power input? What kind of cable could I use to go from an NP-1 or BDS into the SRc?

A: The receiver accepts from 6-18V d.c. @1.4W, so it is compatible with most any battery or DC supply system. The connector is an LZR threaded locking plug. Our PS200 cable goes from a Hirose to LZR so that might help. (You didn't state what type of connector is at the supply side). Also - and very important: you must order with the receiver a bottom plate that is suitable to your application. If the receiver is not being used in a camera the most commonly used plate is the SREXT. This gives you both audio channels out on TA3 connectors and the LZR power input port.

Q: 4. Will this work with a Behringer X32?

A: It looks like the X32 uses a 4-pin XLR, which would be our LTE-519XLR4. Best regards, Hosa Support.

Q: 5. Would this connect with my old UM200C Transmitter?

A: Depending on the transmitter type, protocol and frequency, suggest calling Lectrosonics ph: +1 505 892-4501 See below for compatibility: DCR822 - Compact Digital Receiver Continuously tunable tracking filters covering 470.100 - 614.375 MHz Compatible with D2, Duet and Digital Hybrid Wireless® transmitters Lectrosonics DCR822 System Wireless Transmission Digital UHF Diversity True Diversity RF Frequency Band 470.1 to 614.375 MHz https://www.bhphotovideo.com/c/product/1597459-REG/lectrosonics_dcr822_compact_dual_channel_digital.html/accessories

Q: 6. What antennas (shark fins) are compatible for this? Especially if I used the new lectrosonics digital transmitters?

A: The Lectrosonics ALP500 LPDA Shark Fin Style Antenna for Fixed Indoor Installation (B&H # LEALP500) is compatible with all Lectrosonics wireless microphone and IFB systems. The Lectrosonics ALP620 Perforated LPDA Shark Fin Style Antenna (B&H # LEALP620) is for fixed installation indoors and outdoors, and it is compatible with all Lectrosonics wireless microphone and IFB systems. As another option, the RF Venue Diversity Fin Antenna with Stand Mount for Wireless Microphone Systems (B&H # RFDFIN) is compatible with all brands of wireless microphone and IEM systems.

Q: 7. Does this run off of 9V battery power?

A: You would need SR9VBP to be able to run this on a 9V battery. https://www.bhphotovideo.com/c/product/663969-REG/Lectrosonics_SR9VBP_SR9VBP_9_Volt_Battery.html

Q: 8. Will this connect to my old UM200C transmitter?

A: No, this receiver is not compatible with the UM200C transmitter. The UM200C can be used with any 200 Series Lectrosonics receiver that operates within the same frequency group. The DCR822 receiver is compatible with D-Squared and Duet digital transmitters, including the DBu, DHu, DPr, DCHT, and M2T. There is backward compatibility with any Digital Hybrid wireless transmitters including the SM and SMWB series, WM, HM Series, MM400 Series, HHSeries, LT, LMb, UM400 Series, and SSM.

Q: 9. is this cable for sound or strobe lights? i'm looking for a cable to plug my mic transmitter output 1/4'' to the input of my portable speakers that only has a 3.5mm line in. any info would help. thank you

A: It's for audio. L

Q: 10. What's the pinout? I'd like to verify before ordering.

A: Please contact hosa technology for this specification:Hosa Technology, Inc.6650 Caballero Blvd.Buena Park, CA 90620Phone: 714-522-8878Toll Free: 800-255-7527Hours: Monday Friday, 8 am 5 pm Pacific TimeEmail: info@hosatech.com