Reduce shake and vibration when performing PTZ camera moves with this PTZCam Vibration Insulating Hardware Mounting Bracketfrom PTZCam. The mounting kit features a vibration reduction mount and a universal mounting plate for a PTZ camera or other gear such as a projector, encoder, or switcher. The plate has a maximum load capacity of 22 lb.

The durable steel mount is made up of four vibration reduction legs between two plates that feature rubber washers and durable bolts to ensure any vibrations are directed outwards to reduce shake. The corner bolts allow you to adjust the tension. The universal plate attaches to the mount and features a 1/4"-20 camera mounting thread and multiple slots for additional mounting options and cable management. The mount is compatible with the optional PTZCam universal mounting L-bracket.

Reduce Shake of Mounted Camera/Gear    Metal Vibration Mount & Rubber Washers    Universal Camera Plate, L-Bracket    22 lb Maximum Payload    1/4"-20 Camera Mounting Thread    Can Use with Universal Mounting Bracket    Durable Steel Construction

Most PTZ cameras

PTZCam universal mounting L-bracket

Other gear such as a projector, encoder/decoder, or switch with a 1/4"-20 mounting thread/screw

Related Questions and Answers

Q: 1. how much does it weigh?

A: This product weighs 28 grams.

Q: 2. We are creating an oak shelf 34" x 8" to hold an PTZ Optic camera for live streaming. Would it be better to mount 4 of these brackets between the stationary shelf and the corners of the floating camera shelf or just mount 1 bracket between the stationary shelf and the camera?

A: The Marshall Electronics Four-Point Vibration Absorbing Bracket for Micro Broadcast Cameras will only have a 3" x 3" x 1" surface for light weight cameras like the Marshall Electronics CV503. With the small payload limit allowed, I do not believe using multiple units will help stabilize/support the weight of your PTZ camera and shelf.

Q: 3. There appear to be larger holes besides the 1/4 20" holes in this vibration absorbing bracket. Do these holes accept 3/8 16" screws?

A: This does not have 3/8-16” threads.

Q: 4. Will this work out of the box with a Bescor MP-101 motorhead?

A: The PTZCam Vibration Reduction Mount with Universal Plate for PTZ Cameras, can be mounted to the Bescor MP-1AC. However, the efficacy is unknown because it depends on the camera and where and what you are doing.

Q: 5. What are the exact dimensions? Can't them any where online.

A: Unfortunately, the manufacturer does not publish this information publicly at this time and due to the unavailability of stock in our warehouse, we have no way of physically verifying this information.

Q: 6. We are creating Oak shelving 34" x 8" to mount the PTZ Optic live stream camera. Would it be better to mount 4 Brackets between the stationary shelf and floating camera shelf or just 1 bracket under the camera attached to the stationary shelf?

A: The Marshall brackets are designed to be used individually for mounting small cameras onto drones or bicycles. The PTZ cameras weigh significantly more. It is not designed for a static shelf mount.

Q: 7. Will I be able to attach the Teradek Dual Direct battery plate, B&H #TE110810 MFR #11-0810 onto this?

A: Yes you will be. This product is compatible with B&H #TE110810.

Q: 8. Will this work with both PIXELab IFW45WM - Outdoor Long Range optical Zoom Camera & PIXELab IPW42W - Outdoor Wide Lens 180 degree Camera?

A: This is a universal mount and it works with a wide range of PTZ camera models. Your security camera should be able to mount to this mount however it is not really designed for cameras like the PIXELab IFW45WM.

Q: 9. What are the dimensions of the mount itself?

A: 108 x 108 x 56mm / 4.25 x 4.25 x 2.2"

Q: 10. Would this work with a large Sony BRC-H900 PTZ camera? I cannot tell the size of this?

A: The PTZCam Vibration Reduction Mount with Universal Plate for PTZ Cameras is compatible with the Sony BRC-H900 1/2" HD 3CMOS Remote PTZ Camera.