Power your DJI RS 2 handheld gimbal with a high-capacity battery to last a long shooting day using this CAME-TV Base Adapter MKII for DJI RS 2 Gimbalfrom CAME-TV. This adapter mounts onto the base of the DJI RS 2 gimbal handle and provides one 14.8 VDC D-Tap input/output connector and one 14.8 VDC 4-pin input/output connector for powering the gimbal as well as accessories using a separately available professional battery, such as V-mount or Gold mount, with a D-Tap output.

On the bottom of the adapter, there are two 1/4"-20 anti-twist threads and one 3/8"-16 thread for mounting on separately available tripods and rigs. A safety bracket mounts onto the side of the adapter to lock it onto the base. A 4-pin to D-Tap cable is included and measures 13' in length.

Power DJI RS 2 with External D-Tap Power    Mounts onto Base of Gimbal Handle    D-Tap and 4-Pin Input/Output Connectors    13' Long 4-Pin to D-Tap Cable Included    1/4"-20 and 3/8"-16 Bottom Threads    Safety Lock for Secure Installation    Use High-Capacity Professional Batteries

DJI RS 2 gimbal stabilizer

Professional battery with D-Tap output such as V-mount or Gold mount

Related Questions and Answers

Q: 1. Does anyone know of a shorter cable that can be used with this base? The 13 footer is great but is overkill with smaller set ups.

A: at the moment the manufacturer does NOT make a shorter cable

Q: 2. are the motors strong enough to shoot from a helicopter?

A: If there is strong wind gusts the DJI RS3 Mini would probably not be stable. We would recommend the DJI RS3 Pro which handles up to 10lb payloads and has very strong motors.

Q: 3. Is this gimbal fully compatible with the Nikon Z fc?

A: Yes, The Nikon Zfc is supported and compatible with the DJI RS3 Mini gimbal. Good info - https://bit.ly/3GAeL6S

Q: 4. Where can I find the actual metal poll needed for this to clamp? Ideally with a base with 1/4 threaded holes.

A: If you need the mounting rail and suction cups, get the following kit instead of the CAME-TV GS10-RS2 Video Camera Stabilizer Arm with DJI RS 2 Base (2 to 22 lb): the CAME-TV GS10 Camera Stabilizer Arm with Suction Mount Kit (2 to 22 lb Load), B&H # CAGS10SUCTN.

Q: 5. Is there an option to power the RS-2 from d-tap or v-mount instead?

A: The following two choices listed below from Came-TV and Tilta come with Dtap cables. CAME-TV Base Adapter MKII with D-Tap Power I/O for DJI RS 2 Gimbal BH #CARS2BASE • MFR #RS2-BASE Tilta also has a solution. Tilta Power Supply Base Plate for Select DJI Gimbals BH #TIGAPBP

Q: 6. Will this adapter plate work on the Dji 3 pro?

A: Yes, The CAME-TV Base Adapter MKII with D-Tap Power I/O for DJI RS 2 Gimbal would also support the DJI RS3 Pro.

Q: 7. Will this work with Sony FX30 along with the Sirui 35mm 1.8 apsc lens? Whats the limit payload?

A: The Sony FX30 Digital Cinema Camera and the Sirui 35mm f/1.8 Anamorphic 1.33x Lens can mount and balance on the DJI RS 3 Mini Gimbal Stabilizer. The gimbal can handle up to 4.4 pound payloads.

Q: 8. Can the rig be angled for ascending and descending shots?

A: CAME-TV does not state that the CAME-TV Remote-Controlled Slider for DJI RS2 Gimbal with 5.2' Track can be used in an angled position. It is recommended to use the slider in a horizontal position for best performance.

Q: 9. would this be good for still photography?

A: The DJI RS 3 Mini Gimbal Stabilizer is designed for video. Using it for still photography would not take advantage of its feature set unless you need to remotely operate your still photography camera.

Q: 10. Is this gimbal compatible with Sony a7iv

A: Yes, The DJI RS3 Mini will support and control the Sony a7IV. Sony a7IV RS3 Mini compatibility and tested lens list - https://bit.ly/3kQzdsX